Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - AZdevil5

Pages: [1] 2
1
Spring Power!! / Cylinder head!!!!
« on: August 08, 2003, 11:59:24 AM »
I got some new upgrades I want to put in my aps2. My problem is I cant get the cylinder head off. I tryed everything, I am assumeing I turn to the left which I have been. My method is needle nose pliers in the two holes and turn left. No luck, any sugestions???

2
Spring Power!! / Outer barrel problem.
« on: July 28, 2003, 02:23:35 PM »
I was testing out my aps 2 (Bought off ebay). Put it together and noticed that the bolt I screwed in towards the front didnt screw in. I keep trying and looking at it, and found out the threads on the outer barrel were striped. The gun stays togher with one bolt, and is fine when shooting targers, but when you move it around a lot you can kinda tell. I am thinking I can re-tap the threads at a biger size. Does anyone know anything else that will work?

3
Accessories & Gear / Good mics
« on: July 21, 2003, 03:57:37 PM »
I have been looking at mics to use in a game and dont know what works good. I dont want to spend like $100 on the mics that the swat use.
There is 2 mics I have been looking at.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3619129214&category=31688
The price seems to good to be true because most throat mics are $120.

There is also a ear mic that picks up on the viberations in your ear as a mic and a speaker all in one for about $30. I lost the link, but I will find it later.

If you know of any mics that work well, or that you use, tell me about it.

4
Spring Power!! / Aps-2 sv internals........
« on: July 18, 2003, 07:07:52 PM »
I have bought an aps-2 sv that didnt come with internals. I am not sure what to buy. I am going to try to make it at 500 fps, I am guessing that means I need a 300% spring. But I dont know what other stuff I need. Is there a web sigh that sells the parts all togher. Cylinder, pistion, or anything else I need to convert to spring?

5
Accessories & Gear / Aps2 sling....
« on: July 18, 2003, 10:58:14 AM »
What slings fit an aps-2 sv. I have been looking and there doesnt seem to be a specific type of sling. What slings will fit this gun, and what store has it? Thanks.

6
General Airsoft Discussion / New store ..... Combat Depot
« on: June 20, 2003, 01:17:41 AM »
I have been looking at gun prices and found that Airsoft toys made a new sight. http://www.combatdepot.com/ This is the first time I have ever seen it and it looks like a good sight. It has a ok gun selection and is in CA. Shipping prices are awsome. Has any one ever bought something from them?

7
General Airsoft Discussion / Starting new team.
« on: June 03, 2003, 07:12:48 PM »
I have a small group of 4 airsoft players and we want to start a team. We are curently recruting. Check out the promo sight. http://www.geocities.com/azdevil5/night_vision.html

8
General Off-Topic Discussion /
« on: August 14, 2003, 05:30:27 PM »
Any exact date when mars will be at its peak of visibility?

9
General Off-Topic Discussion /
« on: August 12, 2003, 11:31:28 AM »
I liked Gigli better...... [;)] I was going to see swat, but it looked kind of fake,
 and you can tell that the swat team is going to get there objective.

PS: Do NOT see Gigli!

10
General Airsoft Discussion /
« on: August 10, 2003, 10:46:04 PM »
<blockquote id="quote"><font size="1" face="Verdana" id="quote">quote:<hr height="1" noshade id="quote">well i gess it was fun hanging with you gise I took to much **** joust over 1 posting soo i ges i wont be hanging out hear later then<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">

I had to read that 24 times to understand what that jumble of letters was. You are giving underage players a bad name.

11
Spring Power!! /
« on: July 30, 2003, 01:59:34 PM »
I checked some shops, and they dont have anything under a size 4. Mine is a 3 so I might just get it tapped to 4 and drill the stock a little. Any sugestions?

12
Spring Power!! /
« on: July 29, 2003, 09:33:35 PM »
Will they know what size to tap it? Or should I give them the bolt?

13
Spring Power!! /
« on: July 29, 2003, 06:37:20 PM »
How do I find out where a machine shop? Do I look it up in the phone book?

14
Spring Power!! /
« on: July 28, 2003, 04:05:12 PM »
Where do you get the inserts?

15
General Off-Topic Discussion /
« on: July 26, 2003, 12:08:11 PM »
It is a more than a run and gun. It is one big world and you can fly around and protect your bases. There is a 7 day demo at http://www.fileplanet.com A run and gun game I like is counter-strike. The graphics kinda suck, but it is a great game.

Pages: [1] 2