Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - Sstfreek

Pages: [1] 2 3
1
Airsoft Items FOR SALE / SHIPPING OUT SALE! EVERYTHING MUST GO!!
« on: July 01, 2013, 12:40:29 PM »
Hey ya'll! The time has come to get out of the game, as I am leaving for San Diego Marine Corps Recruit Depot on the 19th of August! Here's what I've got for ya! All prices ARE negotiable, but please, don't try and lowball me. I'm not looking for trades, just cash money. You WILL come to me, or at least very CLOSE to me, especially if you are buying the gun. I am located around 32nd St. And Shea Blvd, ZIP 85028 OFFER UP! I NEED THIS STUFF GONE!!!

FOR  SALE:

What started out as a G&G Combat machine, is now a hodgepodge of various parts that make a VERY sturdy rifle in the end, it is Lipo Ready. 12 inch Daniel Defense Rail. MAGPUL PTS MOE STOCK and AFG2. Tango Down Rail Covers. PTS MBUS Flip up sights, mock PEQ15, tacticaql flashlight (runs on 1 CR123 battery) mounted on a 45 degree mount, and extra Crane Stock (to house the 11.1v lipo battery) Shoots a little over 350fps, straight as an arrow. With an absolutely ridiculous ROF. This thing SHREDS. It took me about 3 years to build it from where it was to where it is now. its my pride and joy. I'm looking to get $300 for it. (prices are negotiable)

Replica FAST Ballistic Helmet: Comes with replica MS2000 Strobe, and operator cut flack jack goggles, and peltor ear muff arms attached to the arc rails. Looks great, fits great, is great. looking to get $50 for it with all of the accessories.

6094a: This plate carrier has been with me for quite a long time, it is an unknown brand LBT 6094a replica, with a PIG plate carrier elastic cummerbund. Similar to what the Green Mountain rangers run, this has ben a very lightweight, and versatile rig for me. It has a built in mag panel in the front that can hold 3 mags, but no dividers. Looking to get $50 for it

TMC MAP Replica: This MAP has also been with me for quite some time, you cant have a 6094 without a MAP, so if you buy both the Plate Carrier, and the MAP, I'll give em to ya for $70, if you just want the MAP, you can buy it for $30. I'd prefer to get rid of them both though. The color is navy seal MJK

MISC Other Things: I've got a few metal midcaps, a PMAG, and a gcode holster for a WE P226 railed version. I may just throw that stuff in with your purchase, whatever :P

BUY EVERYTHING YOU SEE HERE FOR $400

Text me at 602 921 4282 if you have any questions, my name is Sean.

http://www.flickr.com/photos/98286504@N07/

PICTURES ARE HERE^ It wont let me post them here for some reason :P

2
Accessories & Gear / Element Comtac II Wiring Issues.
« on: March 17, 2013, 06:17:14 PM »
Hey guys, so Im having nothing but issues with my Comtac ii replicas. I just recently attached them to my arc rails, and I have the wire running around the back of myg neck ( I have the neckband model) and everytime I bend my head a certain way, they shut off automatically. I'm certain it's a wiring issue, does anybody know how to open these bad boys up and what I should do to make this problem stop? Any help would be appreciated :)

Edit: well I've isolated the problem to be the wire connecting the 2 ear pieces, on the right ear piece. I disassembled the earpiece, and I believe I have too do a rewire.

3
Airsoft Items WANTED / Wtb aimpoint micro t1 riser.
« on: December 02, 2012, 06:20:10 PM »
Hey guys, I'm looking for an aimpoint micro t1 riser mount. Anybody have one they'd be willing to sell?

4
Hey guys, I've got an Echo 1 AK CPW for sale. I have used it in one game, and it shoots REALLY straight. Comes with 2 mags, a hi cap, and an AK74 style mid cap. They both feed great. This gun is ROCK SOLID. Except the latch on the stock wobbles a little bit, but it won't effect the functionality of the stock at all. It's a great gun, but I'm not really an AK guy as it turns out. Text me at 602 247 8855

Comes with a battery and charger. Along with the 2 mags. Looking to get around $180 for it OBO. PM and text me if you're interested!


5
Airsoft Items WANTED / Looking for Norotos 3 hole nvg mount (real or clone)
« on: November 22, 2012, 10:05:02 PM »
Hey guys. Im looking for a norotos nvg mount. Does anybody have one they'd be willing to part with? Shoot me a PM!

6
Hey Guys, so my recruiter isn't too happy with me wearing my MARPATS, so I'm looking to sell them and get something else, (Maybe 3 color desert or AOR 1) I'm looking to get $60 for them as a set (The FROG shirt, and the pants) They are in great condition, no rips that I am aware of. If you have some Med. Reg 3 color desert (pants and a combat shirt, not a normal blouse) hit me up, and maybe we'll trade or something. I need these gone :P You will come to me ( around 32nd st and shea blvd.) Hit me up! You can also text me at 1 (262) 753-1766 Prices are somewhat flexible, but no low balling please

7
Airsoft Items WANTED / Looking for a Replica T1 micro with QD riser.
« on: September 10, 2012, 10:32:37 AM »
Anybody have one they're willing to sell?

8
Accessories & Gear / Element comtac ii beeping problem
« on: August 30, 2012, 09:43:37 AM »
Hey y'all. I just recently purchased a set of comtac ii replicas by element. I put 2 Energizer AA batteries in it and turned it on. After 30 seconds it beeped 3 times. It continued doing this for approx five minutes before turning off. Now, I know it does that for low battered. But these are FRESH batteries. HELP! What's goin on here?

9
General Airsoft Discussion / Element Comtac II beeping problem
« on: August 29, 2012, 10:52:21 PM »
Hey y'all. I just recently purchased a set of comtac ii replicas by element. I put 2 Energizer AA batteries in it and turned it on. After 30 seconds it beeped 3 times. It continued doing this for approx five minutes before turning off. Now, I know it does that for low battered. But these are FRESH batteries. HELP! What's goin on here?

MOVED TO ACCESSORIES AND GEAR.

10
Hey guys, I lost a bet, so I'm pretty deep in the hole as of now, and i need to sell my xm177 ASAP It needs a new loading nozzle, (25$ part, I'll link it here -> http://www.airsoftglobal.com/shop/index.php?main_page=product_info&cPath=570_573&products_id=14315)

Cosmetically, it is perfect, still has the original flash hider attached, the only thing wrong with is is the loading nozzle. Will come with the stock 20 round mag, and a 30 round mag (the 30 rounder is a little hard to get it, but once its in, ITS IN!!!)

Im looking to get $200 for it.

What you get: WE xm177 GBBR
                        20 round magazine
                        30 round magazine
                        2 cans of KWA Green Gas

All for $200! Prices are negotiable, just don't lowball me.

You will come to me.

Text me at: 1 (262) 753 1766

11
Airsoft Items WANTED / WTB custom MICH replica (nvg mount/arm)
« on: July 29, 2012, 08:26:08 AM »
Hey guys! I'm lookin to buy a cool lookin MICH 2000, preferably one with the old style NVG mount that has the strap going over the top of the helmet (front to back) with an NVG arm. if you have a helmet, let me know what you have done to it, (pics would be great) and how much you'd sell it for. Cheers!

12
Accessories & Gear / Mich 2000 to mich 2001 conversion help?
« on: July 08, 2012, 08:51:50 PM »
Has anybody converted their mich 2000 to a 2001? If so, do you have any tips or suggestions you could give me? :)

13
Hey there guys! I'm looking to sell a few pairs of my MARPAT or trade for some multicam! I'm selling one blouse (med reg) and one pant (med reg) this is legit Marpat, not any of that knock off crap.

I'll sell the set for 45$ or trade for a set of med reg multicam (preferably with a combat shirt) or a PCU (real or replica)

Next up is a Chinese made 6094a (SOLD)

With mag pouches, and 2 utility pouches I'll sell this for $50



Note, this does not come with the centralized admin pouch. And it only comes with one double m4 magazine closed top pouch

Next up (not 100% sure I want to sell this one, but I'll list it anyways), is a custom g&g combat machine m4 with a worn tan paintjob, 10.5" URX II rail, crane stock, and rear flip up sight (the front flip up sight is built into the URX ris. The rifle needs a new hop up unit, and will come with either a 20" barrel with low profile gas block, or a 10" barrel. Your choice. This gun will also come with an 11.1v lipoly battery and charger. This battery makes the gun RIP. but I do not recommend using it on full auto, use at your own risk. I will sell this rifle for $175 with the lipo and charger. Prices are negotiable. Pics will be added tomorrow. Will trade for a WE m4 GBB.

Also for sale is an Emerson fast helmet replica (pj version) in DE with the circular holes, and VAS shroud.
Price: $45 or trade for a DE opscore FAST ballistic helmet. Sold

I am located at 32nd St and Shea Blvd. I am willing to travel a small ways, but I would prefer tat you come to me. You can text me and request pics if you would like at 12627531766, just let me know in your first text what you are interested in. :)

14
Airsoft Items WANTED / Want: Magpul PTS Masada upper receiver. (DE)
« on: June 09, 2012, 10:23:48 PM »
Hey guys. I'm looking for a FDE Upper receiver for the Magpul PTS Masada. Does anyone know where I could get JUST the upper receiver? Any help would be appreciated. And if you happen have one that you are willing to sell, please send me a PM, and maybe we'll work something out :)

15
Airsoft Items FOR SALE / WTS JG 416 (custom)
« on: April 25, 2012, 04:51:45 PM »
Hey guys, I'm selling an upgraded JG 416 for a friend. This 416 has a full m16 (20") length barrel, and an m16 full stock. Hes looking to get $130 for it. The gun shoots great, 350-400 FPS. the barrel was custom fitted, as was the rail. Grip is a little wobbly, but thats nothing that cant be fixed. Please send an email to: airbourne81@gmail.com, he will send you pics.

Pages: [1] 2 3