Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - Njnewland

Pages: [1]
1
Airsoft Items FOR SALE / G&P hydro dipped polarstar
« on: November 17, 2015, 06:59:57 PM »
First I will announce that I do NOT entertain any trades. Don't bother asking, regardless of your offer. 
I am a long time member @airsoftsociety and a former moderator. If you'd like to see feedback, let me know. Providing it is no issue.

Anyway, I am selling my Polarstar. I just bought this from a local guy but I really have no interest in using it.

Externally, this is a g&p aor2 "jungle warfare" edition. I have an xcortech suppressor/tracer and the peq box that counts bbs and everything as well. I am willing to part out the suppressor and peq together for $60. I believe they retail for at least $120. They are still in good shape, the only issue is the suppressor end cap has been misplaced.

Internally, there is a gen. 3 v2 polarstar with an amped purple nozzle, shimmed for better air consumption for can.
Protein hopup, with prommy purple bucking if I remember correctly. I was told the nub could be shaved a little. (NEW) Madbull 6.03 300mm is included, but not installed. Angel custom trigger.

Issues: Charging handle is missing. The round piece opposite of the selector switch is missing. The bolt latch button is gone as well. Dust cover does not close. All are incredibly minor issues, and could be fixed for <$10.

Extras: Redline firebase regulator, evike standard air-line, and 2x 7.4v batteries (tiny) are included, and fit in the stock easily. 3 lonex flashmags and 1 g&g p(?)mag.
The previously mentioned xcortech peq and tracer are included as well.
If anyone is interested in the flashmags or xcortech bundle, I would sell all 3 mags together for $32 shipped, or the xcortech accessories for $60 shipped.

Enough with the comments, here are some pictures:






I would like $800 shipped OBO for EVERYTHING.
PayPal ONLY. PM with any inquiries.
Thanks!

2
Airsoft Items FOR SALE / WTS - TM PSG1 $250, fully upped CA AK
« on: July 04, 2015, 08:48:58 PM »
Selling my Tokyo Marui PSG1.

Currently non functioning. I believe the motor is shot but I'm not positive. I haven't had any time to mess with it.

The gun is missing some pins and nuts. The scope and mount also have a bit of wobble, but I believe that's fixable. I believe all the internals are stock. There's scratches on the gun, but no cracks.

Included will be the gun with original box, speed loader OG mag, G3 mag, and the scope.

I'd like $250 shipped OBO I'd consider trades but please don't waste my time. I have tons of feedback online. Sold on Airsoft Society and moderated the forum as well. I have plenty of feedback on other sites as well. If you would like to see links to it I will gladly send them to you.











 Classic Army (or TM??)  Ak Beta:
Here is a parts list from the guy I got it from.

AMP Tactical T5000 torque up motor Prometheus tight bore barrel and nozzle.
Piston, gears, spring, cylinder+head bushings  and tappet plate are also upgraded, but I don't know the parts. I haven't cracked the GB open to check. It is shimmed and wired to deans connectors. Less than 800 rounds through it since last cleaned and worked on.

Only thing wrong with it is the rear sight broke and was replaced with a homemade one and screwed on. It works good and doesn't look bad at all though.

Shooting somewhere around 380 fps I would guess. Decent ROF. Trigger response is good. I'll include a high cap waffle mag, rail attachments and the ugly flash light (that hardly works)   for free. I'd like $215 shipped OBO.







Some spare parts (pictured above) :

Tappet plate (v3) : $3 shipped

 Full metal tooth piston with the first tooth shaved: $9 shipped (looks like shs?)

A couple basic pistons with one head $10 shipped.

Stock Short Type motor: $10 shipped. 
$25 shipped for all that stuff and I'll throw in some more parts I have laying around (you'll get $20+ extra in parts)

Also have a 7.4v 3300mah 25c lipo wired to deans. I'd like $18 shipped.



PayPal Only. Message me if you have any questions.
Thanks!

3
Airsoft Items FOR SALE / All I have left...
« on: November 21, 2013, 09:55:52 PM »
Welcome to my sales thread!

I want to get everything sold as quickly as possible, so prices are low!
I use Paypal only. I cover the fees and everything. All my items have the shipping price included. 

If you bundle items, I'll give you a discount. I'm also somewhat negotiable on prices with most items.


I have 120+ positive iTrader feedback ratings on several airsoft sites, I am a moderator on Airsoft Society, and I have 110+ positive feedback on eBay. No negative feedback anywhere! If you would like links to see my feedback, just ask.

Also, if you have questions, please PM me, as I check that more often than my sales thread. Thanks!

Anyway, onto the sales!




Everything pictured + more for $250 shipped.

Here is just a few things I'll mention that is there:
P* airline, 3000/62 tank, magpul stuff, internals, some troy rail guards, plenty of nice stuff, you get a lot more than what you paid for. Nothing is broken.

I'm selling it all now just so I don't have to deal with parting out. So if you want just one thing, don't ask.


4
Airsoft Items FOR SALE / Tanaka M700 pre-ban, VFC 416, E-1 RPK, magpul, tons of parts
« on: April 20, 2013, 03:37:09 PM »

Welcome to my sales thread!

Rules:
No threadcrapping.
PM me if you have a question.
I ship to Cont. US only!
Serious buyers only.
If I don't want to deal with you, I won't.
----------------------------------------------------------------------------------------------
Prices are all OBO. I will work with you on prices.

I will be changing this a lot, so stay tuned!

If you want more pics, please ask. I am happy to take more pics for any potential customers!

All items over $100 get a tracking number. $200+ get tracking+insurance.
For anyone buying something under that price range, those services will cost you extra.

I may part out some stuff, just ask!

The more you buy, the more discounts you get.

I have lots of feedback on airsoftsociety where I am a moderator (+38), NCairsoft (+12), AirsoftOhio (+5), AirsoftForum (+13), and MiAirsoft (+20). 88 total, and constantly growing. If you would like links to see it, PM me.

If we trade, you ship first unless you have better feedback than me.
---------------------

Trade list:
Xcortech X3200 chronograph
Acog 4x sight
Nice Holosight/eo tech replica
RIOT SC gears
SHS/CORE 13:1 gears
Lonex A1 or A2 motor (long type)
VFC 416/17
VFC/G&P MK18
-------------------

Onto the sales!

Guns:


Tanaka M700 pre ban:

Rare gun, in excellent condition.
No leaks, works perfectly. FPS is adjustable.
Scope and rings are included.
$350 shipped OBO.




Echo-1 RPK:

Decent condition, however, has a couple external issues. It is missing the rear sight and the stock cap/pad. Shoots great. Great trigger response and ROF for a stock gun.
$170 shipped OBO.





Classic army-ish proline M4:
A bit of a franken-gun... Has CA externals, but some of them could probable be changed... It has a CA metal hopup chamber, madbull 6.03 tightbore. SRC high torque motor. All else is random...

Piston is stripped, and the gun needs a good bit of TLC. Asking $125 shipped OBO.





VFC 416 externals:
In excellent condition. Hopup and iron sights are included. Suppressor is NFS.
$265 shipped.

----------------------------------------------------------------------




M14 parts lot:
Take everything you see for $130 shipped. GB's do not work IIRC.

--------------------------------------------------

14.8v 30c 1800mah lipo:
Wired to deans, good condition. $30 shipped.


Black padded holster:
$12 shipped


OD (dump?) pouch:
$12 shipped.

Helmet:
I don't know much about it. Has new pads. $20+shipping.

-----------------------------------------------------------------------


Hera-arms Glock carbine kit:
comes with PTS front MBUS and a metal rear sight. $60 shipped.

M4 pistol grips:
Missing baseplates/mounting screws. $7 shipped each. $15 shipped for all three.

WE 1911 hi-capa parts gun:
Beyond broken...but comes with a C02 mag. Frame and what not may be useable for parts. Maybe.
$25 shipped.

HFC "darkhawk":
Missing tons of parts, no mag. $30 shipped.

Plastic m9 frames:
$18 shipped each. $30 shipped for both.

Plastic M4 CQBR upper reciever/front end:
No clue on brand or compatibility. $30 shipped.




------------------------------------------------------------------------




G&P gearbox and M120 motor:
$80 shipped for both.

4x 80rd PMAGS:
$15 shipped each, or $50 shipped for all of them.

Deepfire piston:
$15 shipped.

Magpul PTS AFG:
(black) BNIP. $20 shipped.

Lonex M4 hopup chamber:
Comes with bucking and nub.
$15 shipped.



------------------------------------------------------------------------



AK front ends:
$35 shipped each.

AK lower reciever/body:
$15+shipping.



----------------------------------------------


3 random motors: Not sure if the work or not.
$22 shipped for all three.


Classic Army M24 mag:
(I believe these work with maruzen aps-2 as well...)
$20 shipped.

M4 VN style metal highcap:
$15 shipped.

Mag brand plastic M4 midcap:
$10 shipped.

Metal M4 highcap:
$12 shipped.

WE hi-capa grip:
$12 shipped.

Echo-1 p90 metal upper:
$20+shipping.

SR-25/ScarH???:
Highcap. $18 shipped.

Speedloader:
Free with purchase of $20 or more. Just ask for it.


------------------------------------------
Flyye PC:
Not sure that I want to sell this... It's very worn, and pretty dirty. Pouches not included, but can be for extra.
I would like $70+shipping.

-----------------------------------------------------------------------------
Woodland MARPAT: (issued)
$35 shipped for the set. Both pants and jacket are in great condition. NO rips/stains or anything. Still have the nametapes.



----------------------
Deans installations:

Install/solder connectors for $1 per connector+return shipping.

--------------------------

Thanks for looking!

5
Airsoft Items FOR SALE / Highly upgraded CA LWRC M6A2 FIRESALE
« on: January 17, 2013, 09:33:41 AM »
Upgraded Classic Army LWRC M6A2:

This is one beautiful gun, I am on the edge of keeping it.
Gun is EBB. I will include either a 75rd p-mag, or a highcap p-mag with this purchase.
The body is scratched up, but that does not effect function. This thing shoots great! No issues. Get a battery, load the mag, go shoot things.

Externals:
Magpul PTS UBR Stock (Dual Tone)
Magpul PTS MOE Pistol Grip
Magpul AFG
Magpul XTM Panels

Internals:
SHS 15th nylon piston with full metal rack.
Metal CA hopup chamber.
DB Custom 6.01 Tightbore Barrel
Dean connectors
Echo-1 neo magnet motor. Very torquey and pretty fast.

Everything in it was $800+

I am looking for $300 shipped. (was for sale for $450) get this quick!

Pictures and video below:







http://youtu.be/HpoLuMizumE

6
Airsoft Items FOR SALE / Upgraded M4s, Magpul, SHS, lonex, prommy
« on: November 29, 2012, 01:20:13 PM »
Welcome to my sales thread!

Rules:
No threadcrapping.
PM me if you have a question.
I ship to Cont. US only!
Serious buyers only.
If I don't want to deal with you, I won't.
----------------------------------------------------------------------------------------------
Prices are all OBO. I will work with you on prices.

I will be changing this a lot, so stay tuned!

If you want more pics, please ask. I am happy to take more pics for any potential customers!

All items over $100 get a tracking number. $200+ get tracking+insurance.
For anyone buying something under that price range, those services will cost you extra.

I may part out some stuff, just ask!

The more you buy, the more discounts you get.

I have lots of feedback on airsoftsociety where I am a moderator (+29), NCairsoft (+8), AirsoftOhio (+2), AirsoftForum(+6), and MiAirsoft (+12). 57 total, and constantly growing if you would like links to see it, PM me.

If we trade, you ship first unless you have better feedback than me.
---------------------

Trade list:
Xcortech X3200 chronograph
Nice suppressor (black/5" minimum.)
VLTOR receivers
Magpul Receivers
Metal M4 front ends w/upper receivers
Acog 4x sight
Nice Holosight/eo tech replica
KA CASV-EL
RIOT SC gears
SHS 13:1 gears
Lonex A1 or A2 motor
VFC 416/17
VFC M4
-------------------

Onto the sales!

Guns:


Classic Army LWRC M6A2:

This is one beautiful gun, I am on the edge of keeping it.
Gun is EBB. I will include either a 75rd p-mag, or a highcap p-mag with this purchase.
The body is scratched up, but that does not effect function. This thing shoots great! No issues. Get a battery, load the mag, go shoot things.

Externals:
Magpul PTS UBR Stock (Dual Tone)
Magpul PTS MOE Pistol Grip
Magpul AFG
Magpul XTM Panels

Internals:
Stock Gearbox (AFAIK)
Metal CA hopup chamber
DB Custom 6.01 Tightbore Barrel
Dean connectors
Guarder Infinite Torque-up motor.

Everything in it was $800+

I am looking for $330 shipped OBO.

Pictures and video below:







http://youtu.be/HpoLuMizumE


Classic Army CASV M4:
Part out!



http://youtu.be/kIWsEgRCEiU

Gearbox:
(ROF with SHS HT motor displayed in video. It's fast...)
Lonex 8mm GB shell
Lonex Tappet plate
SHS 8mm bearings
SHS 18:1 gears
SHS piston 15th metal rack
SHS piston head
SHS Cylinder head
SHS selector plate
SHS m100(IIRC) spring
SHS ball bearing spring guide
SHS trigger contacts
SHS air-nozzle
16 AWG wiring
Deans connectors
Wired to the rear
No motor connectors. Just solder to motor for less resistance.
Shimmed
Lubed.
$95 shipped.

Motor:
SHS high torque (long type)
Bevel is in good condition. Works great. $25 shipped

Barrel+hopup assembly:
Prometheus 6.05 ASH barrel
KA metal hopup chamber
Prometheus purple bucking (IIRC)
$40 shipped.

Complete externals (except for pistol grip, which is replaced with a magpul PTS moe grip!)
$135 shipped. Comes with all the CASV rail panels.
(Accessories not included)


Cyma Ak beta-spetz:

Just got this, and decided against keeping it.
This gun works great. Excellent range for a stock gun.
Only things "bad" about the gun is that the flashhider is chipped, and the gun has some wear marks.
Included is the gun, mag, and foregrip.
$85 shipped.


http://youtu.be/dy6uASzmz4E



ICS Mp5:
Parts lot. Needs; Upperreceiver/hopup/barrel.
Comes with; Lowerreceiver, ICS proline gearbox "pre-upgraded", ICS Turbo 3000 motor, full stock, handgaurd +assembly, high-cap mag. Wired to deans. $70 shipped. (selling for friend.)



-------------------


1. Plastic M4 upper receiver. Missing parts. - SOLD
2. Metal MP5 lower - $15 shipped.
3. G&G V2 Gearbox shell. Comes with all screws. - SOLD
4. SB V2 gearbox shell. Missing screws. - SOLD
5. Scar-H, SR-25? Dunno... mag. High-cap. -$20 shipped.
6. WE hi-capa grip. - $10 shipped.
7. XYT gearset. Very little wear. -$10 shipped
8. XYT bevel gear. (all gears listed have little to no wear) -$5 shipped
9. G&G bevel gear. $5 shipped.
10. Element bevel gear. $5 shipped.
11. XYT sector gear. $6 shipped.
12. Bushings/bearings lot. Misc... 6/7/8mm. Metal/plastic. $5 shipped for all of them.
13. Stripped M4 hopup chamber. Metal. - $9 shipped.
14. M4 trigger. - $4 shipped.
15. Metal spring guide. (v2) - $8 shipped.
16. Plastic spring guide. - $4 shipped.
17. V2 tappet plate. - $3 shipped.
18. Stock cylinder head. - $3 shipped.
19. Misc. spring. -$4 shipped.
20. M4 charging handle with spring. - $8 shipped.
21. Connector adapters. They are $4 shipped each. I can make anything with a tamiya and/or deans connector. Other connectors as well, but you must provide them.


Cylinders:
$5 shipped each.



SHS Tappet plate (v2):
BNIB. $4 shipped

SHS 8mm bushings:
BNIP. $8 shipped.

7mm steel bushings:
BNIP. $8 shipped.

6mm steel bushings:
BNIP. SOLD.

Blue bucking with nub:
I have 1 of them left. $3 shipped per bucking+nub. All are new.





Magpul PTS AFG:
$20 shipped each. Currently only have black. I have two left.

ACM Magpul MBUS sets:
$25 shipped per set. I have two more (FDE) sets. More on the way as well (black and OD)


P-mags:
I have five beta project (m4) p-mags. These work great.  Very light. Best mid caps I have ever used. Still in excellent condition. $11 shipped each, or $45shipped for all 5.

MAG mid caps:
Plastic, M4 mags.
120 rounders I believe. Not sure how these feed as I haven't used them much. $9 shipped each, or both for $15 shipped.

Real Magpul MOE/CTR Stock pad:
Fix those flimsy PTS/ACM stock pads! $8 shipped.


Metal M4 selector switch;
$4 shipped



Smart Charger;
"simple" NIMH/NICD. Works great! Comes with power source, tamiya adapter, and alligator clips! Guy I got it from said it was $70 new.
I would like $20 shipped.


Plastic m4 hand guards:
painted, from a CM. $7 shipped.


----------------------
Services:

I install deans connectors for $1 per connector+return shipping.

--------------------------

Thanks for looking!

7
Airsoft Items FOR SALE / Upgraded CA LWRC M6A2,CA CASV M4, Cyma AK, MGC g17, magpul, internals
« on: September 15, 2012, 06:46:25 PM »
Welcome to my sales thread!

Rules:
No threadcrapping.
PM me if you have a question.
I ship to Cont. US only!
Serious buyers only.
If I don't want to deal with you, I won't.
----------------------------------------------------------------------------------------------
Prices are all OBO. I will work with you on prices.

I will be changing this a lot, so stay tuned!

If you want more pics, please ask. I am happy to take more pics for any potential customers!

All items over $100 get a tracking number. $200+ get tracking+insurance.
For anyone buying something under that price range, those services will cost you extra.

I may part out some stuff, just ask!

The more you buy, the more discounts you get.

I have lots of feedback on airsoftsociety where I am a moderator (+27), NCairsoft (+8), AirsoftOhio (+2), AirsoftForum(+6), and MiAirsoft (+12). 55 total, and constantly growing If you would like links to see it, PM me.

If we trade, you ship first unless you have better feedback than me.
---------------------

Trades:
Xcortech X3200 chronograph
Nice suppressor (black/5" minimum.)
VLTOR receivers
Magpul Receivers
Metal M4 front ends w/upper receivers
Acog 4x sight
Nice Holosight/eo tech replica
KA CASV-EL
RIOT SC gears
SHS 13:1 gears
Lonex A1 or A2 motor
VFC 416/17
VFC M4
PEQ-15 with light and/or laser
Nice Tac-light
-------------------

Onto the sales!

Guns:


Classic Army LWRC M6A2:

This is one beautiful gun, I am on the edge of keeping it.
Gun is EBB. I will include either a 75rd p-mag, or a highcap p-mag with this purchase.
The body is scratched up, but that does not effect function. This thing shoots great!

Externals:
Magpul PTS UBR Stock (Dual Tone)
Magpul PTS MOE Pistol Grip (missing motor height adjuster - I have spacers in there now so it still works fine)
Magpul AFG
Magpul XTM Panels
Magpul Ladder Rail Panels
ACM MBUS

Internals:
Stock Gearbox (AFAIK)
Metal CA hopup chamber
DB Custom 6.01 Tightbore Barrel
Dean connectors
Guarder Infinite Torque-up motor.

Everything in it was $800+

I am looking for $350 shipped OBO.

Pictures and video below:







http://youtu.be/HpoLuMizumE


Classic Army CASV M4:
Quite worn externally, internals have some issues.

First off, the parts list (internally):
Lonex 8mm GB shell.
Previous owner said the GB internals are ALL SHS. From what I can see, that's true. (The nozzle is definitely SHS, the piston is definitely SHS [it's SC'd as well] and I haven't take apart the GB to make sure the rest is SHS. However, the guy I got it from is a trustworthy seller, and I believe it's all SHS.)
Motor is an SHS high-torque.
KA metal hopup chamber
Prometheus 6.03 ASH barrel
Hopup bucking is a prommy purple IIRC. Wired to the rear - deans connectors.

Issues:
Cycling is finicky. Semi usually works right, but full auto is "sorta on and off". Gun has either a weak spring, or bad air-seal. Needs some work before it will be fieldable.
Pretty beaten up externally.

What it comes with:
Gun (no extras included from the picture except for the foregrip)
A front (flip up) sight/post that is not pictured.
A (1/one) metal high-cap mag.

Asking:
$285 shipped. The internals were $250+>.




Cyma Ak beta-spetz:

Just got this, and decided against keeping it.
This gun works great. Excellent range (getting 160' easily), no problems.
Only things "bad" about the gun is that the flashhider is chipped, and the gun has some wear marks.
Included is the gun, mag, and foregrip.
$90 shipped.


http://www.youtube.com/watch?v=dy6uASzmz4E

MGC Glock 17:
In AMAZING condition. Made in 1992, I can't even see a scratch. These are collectors guns. Runs best on HFC134a, and nothing else but that has been used in it. Cycles great, pretty snappy. Includes original box and loading nozzle!
No leaks. GREAT PRICE FOR A VERY RARE GUN.

NEED TO SELL. QUICK-SALE price of $135 shipped!




http://www.youtube.com/watch?v=PVmOGWMvSKo...be_gdata_player




-------------------
Internals:


Ported cylinder;
$2+shipping.


V2 spring guide;
Plastic with metal base. $6 shipped.

Metal V2 spring guide;
Very solid. $8 shipped


V2 tappet plates;
$1+ shipping each.



V2/3 gearsets:
I've got a box full of V2/V3 gearsets that I don't use. I'd like $10 shipped per gear set. Some XYT, some Systema, some JG, etc.
--------------------

Gear:

None at this time.

-------------------

Accessories/Externals:

ACM Magpul MBUS:
They are brand new in box. Never used or anything.
$25 shipped per set. CURRENTLY RESTOCKING




Real Magpul MOE/CTR Stock pad:
Fix those flimsy PTS/ACM stock pads! $10 shipped.



WE hi-capa grip;
I'll include any other hi-capa stuff I have laying around.$10 shipped.



Metal M4 selector switch;
$4 shipped



M4 lower;
Plastic. Missing some pieces. In terrible condition.
$4+shipping.

M4 upper receiver:
Plastic with metal upper rail. Missing the bolt cover. $13 shipped.

Another M4 upper receiver:
Plastic with metal upper rail. Missing bolt cover and charging handle.
$10 shipped.



MP5 lower;
Very sturdy, I think it's plastic, but it is as sturdy as metal. Comes with motor heat sink and screws. $10+shipping


Smart Charger;
NIMH/NICD. Works great! Comes with power source, tamiya adapter, and alligator clips!
$25 shipped.


Plastic m4 hand guards:
painted, from a CM. $7 shipped.



I have lots of misc. M4 externals. PM me with what you are looking for and I will see if I have it.
----------------------
Services:

I install deans connectors for $1 per connector+return shipping.


Cans, etc) I can make anything for you using deans and tamiya connectors. $2+shipping per adaptor.
--------------------------
connector adaptors (IE: large male tamiya to female deans, small female tamiya to large male deans.
Thanks for looking!



***I have pics of everything, but I am copy and pasting my ad from other sites that only allow a certain amount of pics, so they are not all posted. If you want to see them, please PM me. ***

8
Airsoft Items FOR SALE / MGC GLOCK, WE 1911, magpul, systema, etc
« on: August 28, 2012, 05:25:32 PM »
Welcome to my sales thread! 

Rules:
No threadcrapping.
PM me if you have a question.
I ship to Cont. US only!
Serious buyers only.
--------------------
Prices are all OBO. I will work with you on prices. 

I will be changing this a lot, so stay tuned!

If you want more pics, please ask. I am happy to take more pics for any potential customers!

All items over $100 get a tracking number. $200+ get  tracking+insurance. 
For anyone buying something under that price range, those services will cost you extra. 

I may part out some stuff, just ask!

The more you buy, the more discounts you get. 

I have lots of feedback on airsoftsociety where I am a moderator (+20),  NCairsoft (+6), AirsoftOhio (+1), AirsoftForum (+4)and MiAirsoft  (+7). If you would like to see it, PM me.

If we trade, you ship first unless you have better feedback than me. 
---------------------

Trades:
Metal M4 midcaps and high-caps
Xcortech X3200 chronograph 
VLTOR receivers
Magpul Receivers 
M4 CASV rail
RIOT SC gears 
SHS 13:1 gears
Lonex motor
Amp motor
Lonex v2 gearbox shell
High end M4s
-------------------

Onto the sales! 

Guns:


MGC Glock 17;
In AMAZING condition. Made in 1992, I can't even see a scratch. These are collectors guns. Runs best on HFC134a, and nothing else but that has been used in it. Cycles great,  pretty snappy. Includes original box and loading nozzle!
No leaks. GREAT PRICE FOR A VERY RARE GUN.
$170 shipped. 





MGC glock 17 proof of function


                 

WE 3.8 hi-Capa;
Comes with 1 functioning mag, and enough extra parts to almost complete another 1911! So for $75  you get 1 functioning gun+mag, and if you take some time and put together the other parts and order any extras needed, you have 2 guns for very cheap.

$75 shipped






WE 3.8 Hi-Capa cycling test


                     

                      
-------------------
Internals:

Systema energy gearbox shell;
Comes with all screws, I will even include some bearings. $65 shipped.




Ported cylinder;
$2+shipping

M4 air-nozzle;
 Plastic.$2 shipped.

2 random stock motors;
Unsure of brand. 
$7 shipped each, or both for $13 shipped. ONE IS SPF.





V2 spring guide;
Plastic with metal base. $6 shipped.

Metal V2 spring guide;
Very solid. $8 shipped 

V2 cylinder head; 
Has some type of padding on it. $5 shipped.



Upper hopup unit; 
 No bucking or nub.
$4 shipped. 


V2 tappet plates;
$1+ shipping each. 


Lot of 5 (five) gears;
Some XYT, some DL, some unmarked.
$12 shipped for all of them.




--------------------
Gear:

None at this time 


-------------------

Accessories/Externals:


Tokyo Marui Peq box; 
$14 shipped



Metal M4 selector switch;
$4 shipped


Plastic carrying handle:
$7 shipped. 


Metal carrying handle;

$10 shipped.




M4 lower;
Plastic. Missing some pieces. In terrible condition.
$4+shipping.



MP5 lower;
Very sturdy, feels like metal, comes with motor heat sink and screws. $10+shipping


FDE ranger plate and mounting hardware;

$6 shipped.





Plastic m4 hand guards:
painted, from a CM. $7 shipped.


http://i1191.photobucket.com/albums/z477/njnewland/395c726e.jpg


Tenergy smart charger;
In great condition, only used a couple of times. Included is a large to small tamiya connector, but I can make more connector adapters for $2 each. 

 $18 shipped 


I have lots of misc. M4 externals. PM me with what you are looking for and I will see if I have it.
----------------------
Services:

I install deans connectors for $1 per connector+return shipping.


Connector adaptors (IE: large male tamiya to female deans, small female tamiya to large male deans, etc) I can make anything for you using deans and tamiya connectors. $2+shipping per adaptor.
--------------------------

Thanks for looking!



***I have pics of everything, but I am copy and pasting my ad from other sites that only allow a certain amount of pics, so they are not all posted. If you want to see them, please PM me. ***

9
Airsoft Items FOR SALE / Upgraded VTAC M4, MGC Glock 17, WE hi-Capa, accessories, etc
« on: August 07, 2012, 07:34:50 PM »
Welcome to my sales thread! 

Rules:
No threadcrapping.
PM me if you have a question.
I ship to Cont. US only!
Serious buyers only.
--------------------
Prices are all OBO. I will work with you on prices. 

I will be changing this a lot, so stay tuned!

If you want more pics, please ask. I am happy to take more pics for any potential customers!

I may part out some stuff, just ask!

The more you buy, the more discounts you get. 

I have lots of feedback on airsoftsociety where I am a moderator (+20),  NCairsoft (+5), AirsoftOhio (+1), AirsoftForum (+1),  and MiAirsoft  (+6) If you would like to see it, PM me.

If we trade, you ship first unless you have better feedback than me. 
---------------------

Trades:
Metal M4 midcaps and high-caps
Xcortech X3200 chronograph 
VLTOR receivers
Nice Metal M4 receivers 
M4 CASV rail
RIOT SC gears 
SHS 13:1 gears
Lonex motor
Amp motor
Lonex v2 gearbox shell
High end M4s
-------------------

Onto the sales! 

Guns:

VTAC M4;

$250 shipped.

Great condition, this started life as a G&G CM. Only stock parts are the receivers, buffer tube, and hopup chamber. ROF is pretty good, trigger response is great. 
Last chrono'd at 327 FPS with .20 BBs.

Parts list from the stock to the FH:
Magpul PTS MOE stock
CM buffer tube
Metal sling mount
Magpul PTS MOE pistol grip
CM G4 body **missing the charging handle**
Echo Blue ultra high torque motor (JG blue rebrand)
SB reinforced Gearbox shell
Gearbox parts are unknown. Could be systema, could be lonex. 
Deans connectors 
G&G hopup chamber
Misc. bucking
IR-hop (basically the same thing as r-hop, but it works well in cold weather as well)
Note that I have NOT tested the IR-hop. It was installed by BlakeBuser from ASM. He told me that it can go from underhopping .20s to over hopping .43s, if wanted. I have no BBs currently to test. 
Barrel is VFC 6.04 brass 
Front end is a MADBULL VTAC 9" rail system.
Larue rail covers. 
AAC Flash-hider.

No sights or mag included. 
Pics and video:

VTAC M4 test





<a href="http://s1191.photobucket.com/albums/z477/njnewland/?action=view&current=016bbad0.jpg" target="_blank"><img src="http://i1191.photobucket.com/albums/z477/njnewland/016bbad0.jpg" border="0" alt="Photobucket Pictures, Images and Photos" /></a>



MGC Glock 17;
In AMAZING condition. Made in 1992, I can't even see a scratch. These are collectors guns. Runs best on HFC134a, and nothing else but that has been used in it. Cycles great,  pretty snappy. 
No leaks. GREAT PRICE FOR A VERY RARE GUN.
$170 shipped. 





MGC glock 17 proof of function


                 

WE 3.8 hi-Capa;
Comes with 1 functioning mag, and enough extra parts to almost complete another 1911! So for $75  you get 1 functioning gun+mag, and if you take some time and put together the other parts and order any extras needed, you have 2 guns for very cheap.

$75 shipped






WE 3.8 Hi-Capa cycling test


                     

                      
-------------------
Internals:

Systema energy gearbox shell;
Comes with all screws, I will even include some bearings. $70 shipped.


G&G V2 (MP5 version) GB shell;
Included are 6 brass bushings and the cutoff lever. I don't have the screws to it though. $11 shipped.



A&K gearset with sector clip;
Very little wear. $11 shipped. 



Ported cylinder;
$2+shipping

M4 air-nozzle;
 Plastic.$2 shipped.

JG blue motor;
I believe this is a JG blue, I don't have the sticker on it, but it is as torque(y) as my JG blue I have in another build, and looks the same. It's definetly a neodymium magnet motor. Pinion is in decent condition. SPF

2 random stock motors;
Unsure of brand. 
$7 shipped each, or both for $13 shipped. 









V2 spring guide;
Plastic with metal base. $6 shipped.

Metal V2 spring guide;
Very solid. $8 shipped 

V2 cylinder head; 
Has some type of padding on it. $5 shipped.



Upper hopup unit; 
 No bucking or nub.
$4 shipped. 


V2 tappet plates;
$1+ shipping each. 


Lot of 5 (five) gears;
Some XYT, some DL, some unmarked.
$12 shipped for all of them.




--------------------
Gear:

None at this time 


-------------------

Accessories/Externals:


Tokyo Marui Peq box; 
$14 shipped



Metal M4 selector switch;
$4 shipped


Plastic carrying handle:
$7 shipped. 


Metal carrying handle;

$10 shipped.




M4 lower;
Plastic. Missing some pieces. In terrible condition.
$4+shipping.



MP5 lower;
Very sturdy, feels like metal, comes with motor heat sink and screws. $10+shipping


FDE ranger plate and mounting hardware;

$6 shipped.





Plastic m4 hand guards:
painted, from a CM. $7 shipped.


http://i1191.photobucket.com/albums/z477/njnewland/395c726e.jpg


Tenergy smart charger;
In great condition, only used a couple of times. Included is a large to small tamiya connector, but I can make more connector adapters for $2 each. 

 $18 shipped 


I have lots of misc. M4 externals. PM me with what you are looking for and I will see if I have it.
----------------------
Services:

I install deans connectors for $1 per connector+return shipping.


Connector adaptors (IE: large male tamiya to female deans, small female tamiya to large male deans, etc) I can make anything for you using deans and tamiya connectors. $2+shipping per adaptor.
--------------------------

Thanks for looking!



***I have pics of everything, but I am copy and pasting my ad from other sites that only allow a certain amount of pics, so they are not all posted. If you want to see them, please PM me. ***

10
Airsoft Items WANTED / WTB: M14 scope mount and mag pouches
« on: June 11, 2012, 09:02:58 PM »
I need a scope mount for my m14 as well as some tan M14 mag pouches.

PM me for fastest response.
Thanks!

11
Airsoft Items FOR SALE / Custom Barrett m82 AEG
« on: May 21, 2012, 10:53:45 PM »
For sale/trade today is my Snow Wolf Barrett M82a3/M107;

I can guarantee you that you won't find another one like this. 

Features;
Custom laser engraved trademarks.
Shortened outer barrel (still longer than CQB length)
Swiss cheesed the outer barrel where nothing is revealed/showing. Was done to reduce weight. 
Mag has been converted into a mid cap.

There is 1 pin on the gun to disassemble it.
Gun weighs only 14 pounds! 
Gun is in excellent condition! 


Parts list:
Snow wolf Barrett m82 AEG-$280
Metal hopup chamber-$20
Madbull 6.03 650mm tightbore barrel-$45
3-9x50 scope. Red and green reticle, black right now as it needs batteries. Nicest scope I have ever used for airsoft. I still have the scope lense covers as well. -$100


It has no gearbox or motor currently, so you will need to get those yourself. 


I am asking $325 shipped OBO. 

For trades, please offer up! 
 I like tons of different things. 


Pics:








12
Introduce Yourself! / Hello
« on: May 02, 2012, 05:24:09 AM »
Just saying hi.
Some of you guys might know me from other sites. I am online all over the place. I mostly hang out on AirsoftSociety, where I am a moderator.

I have been playing for about 3.5 years now, I love the sport, and really enjoy teching guns.


See you guys around!

13
Airsoft Items FOR SALE / Guns, gear, internals, accessories, etc.
« on: May 01, 2012, 10:37:24 AM »
Welcome to my sales thread! 

Rules:
No threadcrapping.
PM me if you have a question.
I ship to Cont. US only!
Serious buyers only.
--------------------
Prices are all OBO. I will work with you on prices. 

I will be changing this a lot, so stay tuned!

If you want more pics, please ask. I am happy to take more pics for any potential customers!

I may part out some stuff, just ask!

The more you buy, the more discounts you get. 

I have lots of feedback on airsoftsociety where I am a moderator,  NCairsoft, and MiAirsoft. If you would like to see it, PM me.

If we trade, you ship first unless you have better feedback than me.
---------------------

Trades:
Xcortech chronograph
.20, .25, and .30 gram BBs. No Bio.
Metal m4 mid-caps
CASV M4 rail
Nice M4 builds (mostly just want the externals+a GB shell)
Lonex motors
CB admin pouch 
Nice Tac. Laser with pressure pad.
RiotSC gears
SHS 13:1 gears
Anything else that you think I might be interested in. Please don't offer me some random piece of trash though.
-------------------
Guns:

MGC Glock 17;
In AMAZING condition. Made in 1992, I can't even see a scratch. These are collectors guns. Runs best on HFC134a, and nothing else but that has been used in it. Cycles great,  pretty snappy. 
No leaks. 
$200 shipped.





MGC glock 17 proof of function


                 

WE 3.8 hi-Capa;
Comes with 3 mags, 1 is functional, the other 2 don't feed right, but hold gas fine. Included extra is enough parts to almost complete another 3.8 hi-Capa 1911. 
$100 shipped.





WE 3.8 Hi-Capa cycling test


                     

                      
-------------------
Internals:

Systema energy gearbox shell;
Comes with all screws, included with it is 5 bearings, one has a small crack. $90 shipped.


Tokyo Marui EG-1000 motor;
Pinion gear is stripped, but included with it is a brand new SHS pinion gear. $18 shipped.




Modify bore-up kit;
$18 shipped.



V2 trigger assembly;
With low resistance wiring. $10 shipped.


Modify rotary spring guide;
$12 shipped.


V2 spring guide;
$8 shipped.



V2 cylinder head; 
Has some type of padding on it. $7 shipped.



Upper hopup unit; 
 No bucking or nub.
$7 shipped. 


V2 tappet plates;
$2+ shipping each. 



Lot of 5 (five) gears;
Some XYT, some DL, some unmarked.
$12 shipped for all of them.



Burst wizard thingy;
Not much to say... It lets you have burst in your AEG, or have semi only.
$18 shipped.




--------------------
Gear:

None at this time 


-------------------

Accessories/Externals:


Tokyo Marui Peq box; 
$15 shipped



Metal M4 selector switch;
$5 shipped


Plastic carrying handle:
$7 shipped. 




Metal carrying handle;
$12 shipped.



Silver scope ring;
$1+shipping.



M4 lower;
Plastic. Missing some pieces. 
$5+shipping.

Metal buffer tube and M4 stock;
$10+shipping for both

MP5 lower;
Very sturdy, feels like metal, comes with motor heat sink and screws. $10+shipping

M4 pistol grip;
Heat sink and heat sink screws included.
$6 shipped.




FDE ranger plate and mounting hardware;
$6 shipped.


LE stock;
$10 shipped



Plastic m4 hand guards:
painted, from a CM. $7 shipped.


http://i1191.photobucket.com/albums/z477/njnewland/395c726e.jpg


I have lots of misc. M4 externals. PM me with what you are looking for and I will see if I have it.
----------------------
Services:

I install deans connectors for $1 per connector+return shipping.

--------------------------

Thanks for looking!

14
Airsoft Items WANTED / wttf/wtb systema/celsius ptw/ctw
« on: January 21, 2012, 03:36:50 PM »
I would love to get my hands on either a systema PTW of any kind or a celcius ctw of any kind.

I have 4 ARs to offer and a nice bit of cash
PM for fastest response

Custom m16, that I have over $600 in. Built for a lipo, 25 rps on a 9.6v!
Kwa sr12
Kwa kmbr16
Upgraded echo1 stag-15. Built for a lipo, 21 rps on a 9.6v!

Pages: [1]