delete

I bought myself a 416c and am now looking for some used WE m4 gas magazines. 20 round VN style or 30 round stanag doesnt matter. Color is not an issue either however im not interested in CO2 versions.

Im a very active gbb user. Been through eleven different gas guns. Ranging from WE, g&p, ect. Now by far the guns that consistently disappoint and provide problems are kwa guns in my experience. Out of five only one kwa gun worked as it should have. My m11a1 developed huge stress cracks at the rear of the lower receiver. The usp would go full auto or burst at random times. The atp wouldnt fully cycle usually providing weak recoil, low fps, and sometimes not even feeding properly. The mp9 was the best as it worked as it should.

Now my latest kwa fiasco is a kriss vector. There is an apparent issue of the lower receiver frame rails and bolt carrier. They grind on each other and prevent the bolt from being taken out of the receiver for dis assembly. Pulling the charging handle feels so gritty and the bolt will get stuck in the rear position sometimes. After lots of high grit sanding on the rail guides and the bolt carrier i ended up sending it in to KWA as there was no improvement. This guy is going to cost $105 to repair! None of my other gbb's have ever given more of a headache and problems than KWA guns do. Except maybe the WE g39c which had a loose barrel assembly that was unfixable. Any body else had problems like these with KWA gbb's?

I have a magpul AFG 1 in OD for sale. ten bucks and its yours. I dont really use accessories other than a flashlight so go ahead and buy mine.

delete

So im thinking about selling my g&p woc. Depending on the offers i may just keep it but m4's are boring to me now. So starting off with what's included; the WOC, a g&p pmag, and some extra parts are what you're getting. Externally my WOC has a g&p magpul lower receiver and a vltor MUR upper. On the receiver i have put a g&p steel selector (non ambi) and g&p ambi mag release. The stock is a g&p vltor style one (emod i think) and the stock tube is a 5ku vltor engraved one with a qd sling plate with mount. The grip is a magpul miad and the rail is 7 inch DD lite rail. I've put a vltor front sight and troy rear sight on it and the barrel is a 14.5 g&p steel barrel. Last thing is the front pivot receiver pin is a ra-tech magic pin so there is no receiver wobble at all.

Now for the internals! This has the standard g&p firing block, g&p steel firing pin, g&p steel bolt catch, g&p steel trigger, g&p steel trigger sear, g&p steel hammer, g&p steel buffer lock, g&p metal hop up set and inner barrel, g&p standard charging handle, and g&p aluminum buffer. The bolt carrier is a 5ku aluminum vltor and the bolt (nozzle) is a SA nylon fiber one. I will include a 5ku metal nozzle and locking plate as well. Some extra springs and parts will be included as well. Im asking $350 plus shipping. Price lowered because while i was running a drill with this guy the new plastic nozzle cracked at the tip so now im down to using the metal nozzle. The metal nozzle does not produce a seal near as well as the plastic one so the oring needs to be replaced with a thicker one to get better gas efficiency ATM it sucks. oring size is either a 2.4mm or 2.5mm with a 12 or 12.5mm inner diameter. Cash is king here. Feast your eyes on my m4 now. Ive also posted this on gasguns.info so i can cover my bases.
 

So im selling my desert warrior that i made a review of about a month ago. Im letting it go for $50, comes with two magazines, original box, and manual. The gun needs a new nozzle. Im sick of replacing the nozzle in this gun as this is the third time that it has broken; you know what they say about the third times a charm. If you want to save yourself the headache of replacing these get the guarder nozzle. you can pm me or send me a txt at 480-341-0573.

so another recent review I have made. this is on the WE desert warrior. I've seen far to many reviews on this gun made by people that are either sponsored, novices, or that have just made a review on the gun without skirmishing it. I have made this review with all of these issues thrown out of the window. I'm not sponsored, have been airsofting for a few years now, and I have skirmished this gun. I point out exactly what i think about this gun in the video review. I hope you guys enjoy.  https://www.youtube.com/watch?v=j3AejD2yTc8