Airsoft Arizona

Airsoft Hardware => Gas Powered Guns => Topic started by: Ace1043 on April 22, 2013, 02:12:22 PM

Title: Trigger sensitivity mod help
Post by: Ace1043 on April 22, 2013, 02:12:22 PM

So I recently got a TSD SD92 pistol and noticed the trigger is a little difficult to pull.. How can I if possible make the trigger more sensitive?

Title: Re: Trigger sensitivity mod help
Post by: B-Rad on April 22, 2013, 08:01:36 PM

not sure if there is too much to do about that because of SA/DA.

Title: Re: Trigger sensitivity mod help
Post by: Old Dog on April 22, 2013, 08:20:25 PM

You might try to Google: TSD SD92 trigger adjustment lots of info available for one that wants to research ideas, and solutions others have found, GOOD LUCK friend...

Title: Re: Trigger sensitivity mod help
Post by: birdman on April 22, 2013, 08:25:57 PM

Finger exercises? It will help you when you're older as well.

Title: Re: Trigger sensitivity mod help
Post by: Ace1043 on April 22, 2013, 08:54:10 PM

Thanks guys I'll have to google it I guess...  Birdman trust me I get plenty of finger exercise  ;)

Title: Re: Trigger sensitivity mod help
Post by: B-Rad on April 23, 2013, 12:16:23 AM

Quote from: Ace1043 on April 22, 2013, 08:54:10 PM

Thanks guys I'll have to google it I guess...  Birdman trust me I get plenty of finger exercise  ;)

Bird, i think he's flirting with you.

Title: Re: Trigger sensitivity mod help
Post by: spazz on April 23, 2013, 08:23:02 AM

first thing is to try a lil lubrication. it will make fingering your gun a lil easier. sometimes the manufactures dont lube the internals correctly during assembly. i had to dhat with both of my kjw mkii guns. the trigger pull on those was horid before i cracked them open.

Title: Re: Trigger sensitivity mod help
Post by: DesertEagleLover on April 23, 2013, 06:00:17 PM

You may just have to break it in.

Title: Re: Trigger sensitivity mod help
Post by: Ace1043 on April 23, 2013, 10:26:26 PM

What do I use to lubricate it? And I have been using it a lot and it does seem to have gotten easier..

Title: Re: Trigger sensitivity mod help
Post by: birdman on April 23, 2013, 11:26:52 PM

ky jelly

Title: Re: Trigger sensitivity mod help
Post by: spazz on April 25, 2013, 02:38:57 AM

what have you been use to lube it so far?

Title: Re: Trigger sensitivity mod help
Post by: Ace1043 on April 25, 2013, 07:20:27 AM

Nothing.. I think ima wait and just use it how it is for a bit if it doesn't get better then ill use something...r

Title: Re: Trigger sensitivity mod help
Post by: spazz on April 25, 2013, 08:27:39 AM

the problem with waiting and playing with it to see if things will improve is that, if your gun is under lubricated, you could be have metal to metal contact with no lube which will cause your parts to wear faster.

Title: Re: Trigger sensitivity mod help
Post by: Ace1043 on April 25, 2013, 08:30:31 AM

Im just not to sure if i know how/what to lubricate...