1
Gas Powered Guns / Re: Who's got one of these? (FTC Spectre M4)
« on: October 29, 2015, 02:17:31 PM »
Ya I like it too much to sell anyway.
News:
Facebook might hate freedom, but it's still going strong here.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
Gas Powered Guns / Re: Who's got one of these? (FTC Spectre M4)
« on: October 29, 2015, 01:51:19 PM »
I had a guy offer me 400 for the stock. Must be really rare lol
3
Gas Powered Guns / Re: Who's got one of these? (FTC Spectre M4)
« on: October 29, 2015, 01:48:54 PM »
Did you get the stock with yours?
4
Gas Powered Guns / Re: Who's got one of these? (FTC Spectre M4)
« on: October 27, 2015, 10:23:00 AM »
Not that I'm aware of. I got it from a friend in California.
5
Gas Powered Guns / Who's got one of these? (FTC Spectre M4)
« on: October 22, 2015, 03:28:02 PM »
Just picked this little guy up. Not sure if I'd be a tard for ripping it apart and installing a fusion engine in it or if it'd be cool to just run the stock has setup in it.. What say you?!
This isn't the echo1 or AY version. It's the old 90's FTC with the rarest stock in airsoft history.
This isn't the echo1 or AY version. It's the old 90's FTC with the rarest stock in airsoft history.
6
Airsoft Items FOR SALE / Crye XL JPC, full polarstar setup tank, reg, line, tourney lock and mags etc
« on: July 02, 2015, 09:34:32 PM »
Selling all my stuff to make room for my baby daughter on the way. In no rush by any means but motivated.
I have a p* latest revision with the 250psi noids
Noveske NSR keymod rail
PWS madbull body
KFH
magpul UBR stock
Magpul flip ups
Magpul keymod hand guards
Adult maintained
Real Crye JPC in XL multicam
Tactical Taylor 3 mag shingle, IFAK, dump pouch and a camelbak clip on bladder on the back.
I'm looking for 1350.00 for the whole thing that includes mags batteries .32 bbs and basically whatever else I have to service the Polarstar. I will leave and meet you within a reasonable distance. All of my stuff works good and is no BS. You can text me at 602-503-7173 for pictures or if you have any questions. The only trades I'm looking for is an entry-level AK that would maybe knock off 100 bucks to the whole deal. No other trades or interests unless it's gold, Rolex watches, or platinum. For real
I have a p* latest revision with the 250psi noids
Noveske NSR keymod rail
PWS madbull body
KFH
magpul UBR stock
Magpul flip ups
Magpul keymod hand guards
Adult maintained
Real Crye JPC in XL multicam
Tactical Taylor 3 mag shingle, IFAK, dump pouch and a camelbak clip on bladder on the back.
I'm looking for 1350.00 for the whole thing that includes mags batteries .32 bbs and basically whatever else I have to service the Polarstar. I will leave and meet you within a reasonable distance. All of my stuff works good and is no BS. You can text me at 602-503-7173 for pictures or if you have any questions. The only trades I'm looking for is an entry-level AK that would maybe knock off 100 bucks to the whole deal. No other trades or interests unless it's gold, Rolex watches, or platinum. For real
7
Gas Powered Guns / Re: Polarstar low air consumption setup. What am I missing?
« on: April 17, 2015, 02:58:17 PM »
I think it has a lot to do with the red nozzle a high DP setting and a 6.01 tightbore lol
8
Gas Powered Guns / Re: Polarstar low air consumption setup. What am I missing?
« on: April 17, 2015, 02:44:57 PM »
ill try all my combos and see what I come up with. I think I need a gold low flow poppet
9
Gas Powered Guns / Re: Polarstar low air consumption setup. What am I missing?
« on: April 17, 2015, 02:36:21 PM »
When I was at the op in New Mexico this weekend my gun barely ran right at the field limit of 330 with the .32. And that was a blue nozzle and zero pop at shimming
10
Gas Powered Guns / Re: Polarstar low air consumption setup. What am I missing?
« on: April 17, 2015, 02:29:55 PM »
LOL! I don't want to be shooting 380 with a .32
I chronoed that number before I replaced the 6.01 barrel with a stock brass 6.05+ m4 length and have to recheck chrono.
I am using a 4500/90 tank with an AKA SST reg.
My goal is to use 80-90 psi to be in the 400 fps field range limit with a .20. I was under the impression if I used a red nozzle and shimmed my poppet I could achieve that.
I chronoed that number before I replaced the 6.01 barrel with a stock brass 6.05+ m4 length and have to recheck chrono.
I am using a 4500/90 tank with an AKA SST reg.
My goal is to use 80-90 psi to be in the 400 fps field range limit with a .20. I was under the impression if I used a red nozzle and shimmed my poppet I could achieve that.
11
Gas Powered Guns / Polarstar low air consumption setup. What am I missing?
« on: April 14, 2015, 09:17:59 PM »
So I have my p* sitting like this.
Red nozzle
.35 poppet shims in stock poppet
80-90 PSI
AK inner brass barrel
Still shooting 380 with .32
Is my inner barrel too long or should I get a gold low flow poppet?
Red nozzle
.35 poppet shims in stock poppet
80-90 PSI
AK inner brass barrel
Still shooting 380 with .32
Is my inner barrel too long or should I get a gold low flow poppet?
12
General Off-Topic Discussion / Re: There are lines that should never be crossed.
« on: August 11, 2014, 08:04:58 PM »
If you read the full story it was like a lionclaws-esque game they attended. The photos were part of the game. This wasn't something they did on their own to be cool.
13
Airsoft Items FOR SALE / Re: Umarex (ares) ump and mp5 for sale/trade
« on: July 15, 2014, 03:37:46 PM »
Ump lowered to first 100$
14
Airsoft Items WANTED / Re: Looking for G&G MP5 SD front end.
« on: July 14, 2014, 09:27:07 PM »
Also a umarex front end apparently will work. Seeing as g&g makes them. So if you have one let me know.
15
Local Games Listing/RSVP / Re: Prescottonia 7-26-2014
« on: July 10, 2014, 08:27:10 PM »
Will do XM