M40A3???

[DMAN007]

Where could I find and buy an airsoft M40A3? I know I can get a VSR10 and get the Fortress stock buy that seems like it would end up being fairly pricey and I'm not sure if the fortress stock would really be worth the $400 price tag. I also don't want the UTG pos one

Thank you

[airsoftguy01]

Buy a real McMillan stock, then adapt it to either the spring or gas platforms available.

[DMAN007]

Buy a real McMillan stock, then adapt it to either the spring or gas platforms available.

Only $100 more than the fortres. Would really suck to mess something up in the process of adapting it

[Pick]

Lol that would be an expensive mistake

[airsoftguy01]

Bolt action sniper rifles in Airsoft are kind of moot, unless you want to stalk around all day in a ghillie, they are not effective.. siome will argue this but I've learned it throughout the years of trying to do it. You are better off building a DMR type rifle. If the M40a3 is really what you want, contact Ben Noji @ Polarstar and he will bed the stock for you.

[Pick]

As for a DMR. The best stock platform I have seen is the KWA SR12 (hence why I am buying one)

[DMAN007]

Bolt action sniper rifles in Airsoft are kind of moot, unless you want to stalk around all day in a ghillie, they are not effective.. siome will argue this but I've learned it throughout the years of trying to do it. You are better off building a DMR type rifle. If the M40a3 is really what you want, contact Ben Noji @ Polarstar and he will bed the stock for you.

I've had 3 bolt action snipers since I began airsofting years ago, I loved all of them and probably had the most fun with them out of any of my other guns. I sold them all also because they became to be more pricey then I really wanted to pay. But now I have the funds to start a project Bolt Action gun and want it to be a M40A3. Also how much, if you had to guess, would it cost to have the stock bedded?

contact Ben Noji @ Polarstar and he will bed the stock for you

As for a DMR. The best stock platform I have seen is the KWA SR12 (hence why I am buying one)

I'm not a fan of DMR's since they basically perform a task that my M4 could do with a 3x magnifyer attached

[airsoftguy01]

Bolt action sniper rifles in Airsoft are kind of moot, unless you want to stalk around all day in a ghillie, they are not effective.. siome will argue this but I've learned it throughout the years of trying to do it. You are better off building a DMR type rifle. If the M40a3 is really what you want, contact Ben Noji @ Polarstar and he will bed the stock for you.

I've had 3 bolt action snipers since I began airsofting years ago, I loved all of them and probably had the most fun with them out of any of my other guns. I sold them all also because they became to be more pricey then I really wanted to pay. But now I have the funds to start a project Bolt Action gun and want it to be a M40A3. Also how much, if you had to guess, would it cost to have the stock bedded?

contact Ben Noji @ Polarstar and he will bed the stock for you

As for a DMR. The best stock platform I have seen is the KWA SR12 (hence why I am buying one)

I'm not a fan of DMR's since they basically perform a task that my M4 could do with a 3x magnifyer attached

No idea, just contact them. Probably more than you are willing to pay for the whole project. Even once you get the outside stuff done, then you have a 150ft gun depending on what you start with...Might want to just get something that works and upgrade it.


DMR's aren't just an m4. I have a GBB DMR that is very accurate and shoots up to 600fps and is accurate within 5fps. More importantly, I can just dial down or up the fps in a few seconds. A "DMR" is nice because you can take quick follow up shots if needed.

[DMAN007]

No idea, just contact them. Probably more than you are willing to pay for the whole project. Even once you get the outside stuff done, then you have a 150ft gun depending on what you start with...Might want to just get something that works and upgrade it.


DMR's aren't just an m4. I have a GBB DMR that is very accurate and shoots up to 600fps and is accurate within 5fps. More importantly, I can just dial down or up the fps in a few seconds. A "DMR" is nice because you can take quick follow up shots if needed.

My thoughts exactly

Another reason I would prefer a bolt action over a DMR is because I find it adds alot more fun to have to reck a bolt back then just pull the trigger and watch bb's fly. But a GBB DMR would allow me to perform both of those

[Crono0001]

I like my M99 because it's silent
Granted, the bolt is hard to pull back because I put in such a hard spring (hopefully it'll go down in time), but it's extremely satisfying to get a well placed shot rather than your average spam

[DMAN007]

but it's extremely satisfying to get a well placed shot rather than your average spam

I agree, I had a bar 10 that could hit a coke can at about 100ft 8/10 times and at 150ft 5/10 times

[Rogue Fox]

Just popped up on asgi

http://www.airsoftgi.com/product_info.p ... vmcvegoml6

[DMAN007]

Just popped up on asgi

http://www.airsoftgi.com/product_info.p ... vmcvegoml6

That's a M24... not a M40

[Rogue Fox]

Just popped up on asgi

http://www.airsoftgi.com/product_info.p ... vmcvegoml6

That's a M24... not a M40

Your right, my bad. ](*,)  If I remember right Red Wolf had the M40 body kits. I know they have some Tanaka M40s too.

[airsoftguy01]

Just popped up on asgi

http://www.airsoftgi.com/product_info.p ... vmcvegoml6

That's a M24... not a M40

Your right, my bad. ](*,)  If I remember right Red Wolf had the M40 body kits. I know they have some Tanaka M40s too.

Expect to dump close to 1000$ into one before it shoots right, the tanakas that is.