Airsoft Arizona
Airsoft Hardware => Troubleshooting => Topic started by: AddoAduro on July 10, 2006, 04:41:05 PM
-
I just recieved my KWA Glock 18C from airsoftgi today. It's the full upgrade one, metal slide, upgraded recoil spring, high-flow valve, all that good stuff. So naturally, as soon as I opened it, I took outside, filled the mag with Green gas, dropped the included BBs in the mag, and emptied the mag on full auto. (Which was very nice, btw) I thought "Wow, that was cool, let's do that again!" refilled the mag with BBs, cocked it, pulled the trigger (full auto again), it gets 2 shots out, then stops. I dropped the mag out and tried to pull the slide back, (assuming that a BB got jammed) but it's stuck. It only moves back maybe a quarter inch, but if I pull the tabs down to disassemble it, it slides forward maybe an inch, then stops. What do I do?
-
check your recoil spring to maek sure its not sticking out to far, if it is pop it into place with your finger nail, thats the problem i had with mine, but i used silicon spray and it stopped.