1
Airsoft Items WANTED / Re: wtb wttf shot dot type scope
« on: October 17, 2013, 11:24:02 AM »
Ahh sweet thanks man ill check it out
News:
Facebook might hate freedom, but it's still going strong here.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
Airsoft Items WANTED / wtb wttf shot dot type scope
« on: October 17, 2013, 12:18:14 AM »
Im looking for a short dot type scope to finish off my mk12 project. figured il look locally first
An image can be found here
http://m.flickr.com/photos/zero7one-photo/7716123826/lightbox/
Willing to trade 4x32 red/green illuminated acog. Has the real rectical.
And a eotech clone 552 works amazing one of the better quality 552's iv seen. Red and green and you can see the rectical while looking at the sky with it. So its super bright and operates off aa batterys.
And of course cash. Please text me if your interested or looking to sell.
5093622375
An image can be found here
http://m.flickr.com/photos/zero7one-photo/7716123826/lightbox/
Willing to trade 4x32 red/green illuminated acog. Has the real rectical.
And a eotech clone 552 works amazing one of the better quality 552's iv seen. Red and green and you can see the rectical while looking at the sky with it. So its super bright and operates off aa batterys.
And of course cash. Please text me if your interested or looking to sell.
5093622375
3
Airsoft Items FOR SALE / gear boxes internals and alot of random parts for sale
« on: October 16, 2013, 12:28:24 PM »
I jave somthing like 26 version 2 mech boxes ics split design Echo1, jg , tm and CA reinforced. For 10-15 each. I have 9 version 3 g&g cyma, echo1 tm and classic army
Also have tons of gear sets, alot of stock 16:1's and a few sets of 13:1 and 18:1
I have tons of m4 parts metal ca and src bodys
I have a full mp5 just need to be reassembled.
This would be a great purchase for a tech. As im willing to let somthing like 8 years of collected parts. Can be bought in bulk or what ever. I just need these parts out of my garage.
I also have a aor1 lookin marciras vest. Im not sure if its marpt or aor. It doesnt look like marpat. 40 bucks for the marcira vest
Im looking to get rid od all of this stuff. So just offer up. I give great deals on parts because i donnot need them. I may be willing to trade all this stuff for an aeg or somthing
Any questions give me a text or call.
Willing to meet on west wide of valley
15093622375
Thanks
Donnot pm me because i never check this site text or call if your interested i can supply pics from my phone
Also have tons of gear sets, alot of stock 16:1's and a few sets of 13:1 and 18:1
I have tons of m4 parts metal ca and src bodys
I have a full mp5 just need to be reassembled.
This would be a great purchase for a tech. As im willing to let somthing like 8 years of collected parts. Can be bought in bulk or what ever. I just need these parts out of my garage.
I also have a aor1 lookin marciras vest. Im not sure if its marpt or aor. It doesnt look like marpat. 40 bucks for the marcira vest
Im looking to get rid od all of this stuff. So just offer up. I give great deals on parts because i donnot need them. I may be willing to trade all this stuff for an aeg or somthing
Any questions give me a text or call.
Willing to meet on west wide of valley
15093622375
Thanks
Donnot pm me because i never check this site text or call if your interested i can supply pics from my phone
4
Airsoft Items FOR SALE / gear boxes and tons of parts
« on: July 07, 2013, 11:14:24 AM »
I have about 8 v3 gear boxes from marui to cyma askin like 20 each. Also have a ton of v2 same price. I have tons of m4/mp5/g36 and ak body parts i ran a buiness for 5 years i have tons of stuff pm or text me for more info, i probably have every part you could need. My number is 6027540015 or my email is whealeandy@hotmail.com
5
Airsoft Items WANTED / wtb mp5k
« on: July 07, 2013, 10:50:05 AM »
Im lookin for an mp5k doesnt matter if it works or not. Brand doesnt matter eather as long as most of its there pm me please.
Thanks
Thanks
7
Airsoft Items FOR SALE / daytona mk18 block2 for sale
« on: May 12, 2013, 08:45:42 AM »
[img] http://imageshack.us/a/img835/8565/71855102001833992820131.jpg /img]I dont play enough anymore to own this. Im asking 1200 obo no trades. Daytona m4 kit. Newest generation, hqs a dbc 6.01 barrel 310 mm. Aeg converted outer with 14 mm ccw. Threading. With g&p skull frog body. daniel defence mk18 rail and a few mods to the hopup and buffers. For 1200 the external accessorys will be included. And the palmers persuit shop reg setup. Dont low ball me ill ignore you. Your best bet will be texting or calling me 6027540015
May consider trading for a V2 polarstar and cash
May consider trading for a V2 polarstar and cash
8
AEG's / Re: Weapon Photos
« on: February 12, 2013, 10:57:10 PM »
Heres my daytona gun M4. its the Navy seal G&P body, with the mk18 daniel defence rail system. magpul furniture 4x32 acog and m3 flashlight
kicks hard as hell, and makes the game a whole new experience lol
kicks hard as hell, and makes the game a whole new experience lol
9
Airsoft Items FOR SALE / Re: A&k mk43 for sale. 300 Obo i want it gone asap
« on: January 25, 2013, 02:56:00 PM »
Its still up for sale, Shoot me offers its an amazing gun.
BUUUUUUUUUUUUUUUUUUUUMP
BUUUUUUUUUUUUUUUUUUUUMP
10
AEG's / Re: High Speed Gearbox Project
« on: December 01, 2012, 07:17:35 PM »
i agree with spazz for once haha, Loose the aluminum piston head, and replace it with a polycarbonate type. like a g&p explosive which is by far the lightest piston head on the market. and the bearing bushings. get some quality steel bushings, the bearings will fail on you quick with all the dust and crap in the air when you play.
if it was me, i would use a 130 spring and do a 6 to 8 tooth short stroke.
with a 130 spring its around 15 fps per tooth when you have really good compression in the piston/cylinder.
i would also recommend a SHS blue high speed piston with full metal teeth. and then use a dremmel to make the ports on the piston walls a little larger to reduce the weight even more. and a magnum type motor, or even a high speed motor would make it really fast.
iv hit over 50 bbps with that setup. then i just went all out and put a 10:1 DSG in my gun haha
honestly iv never had an issue with any reversal latches. i highly doubt ull need to add more on it. just make sure the axles pivot clean in there.
if it was me, i would use a 130 spring and do a 6 to 8 tooth short stroke.
with a 130 spring its around 15 fps per tooth when you have really good compression in the piston/cylinder.
i would also recommend a SHS blue high speed piston with full metal teeth. and then use a dremmel to make the ports on the piston walls a little larger to reduce the weight even more. and a magnum type motor, or even a high speed motor would make it really fast.
iv hit over 50 bbps with that setup. then i just went all out and put a 10:1 DSG in my gun haha
honestly iv never had an issue with any reversal latches. i highly doubt ull need to add more on it. just make sure the axles pivot clean in there.
11
AEG's / Re: 249 question
« on: November 15, 2012, 12:01:46 AM »
you file the hole so the nub can sit horizontally. then make a custom nub because the stock tube type wont work from crap.
12
AEG's / Re: 249 question
« on: November 14, 2012, 05:30:17 PM »
the m249s are good guns, all of the issues are easly fixed like Listerine said. the main issue runs with box mags. the issue is the feeding tube is too wide in the china box's causing double stacking in there you can split it in half and file it down, or have a tech do it. or just buy a good box mag like a CA or one of higher quality.
m249 gear box's are incredibly solid.
but i would honestly tell you to get one of the G&p mk23's, an ares Stoner, or the a&k m60 or mk43. they are of way better design with the box magazine, and rarely need to be replaced. main issue with them is hopup.
m249 gear box's are incredibly solid.
but i would honestly tell you to get one of the G&p mk23's, an ares Stoner, or the a&k m60 or mk43. they are of way better design with the box magazine, and rarely need to be replaced. main issue with them is hopup.
13
Airsoft Items FOR SALE / A&k mk43 for sale. 300 Obo i want it gone asap
« on: November 14, 2012, 05:18:14 PM »
up for sale is my a&k mk43, it shoots great and is in great condition.
it has a madbull 455mm .03 barrel, shs 13:1 gears with shs Purple piston w/ steel teeth.
and king arms bushing bearings, modify tappet plate and a fresh e-switch in the trigger. the stock mosfet has been removed and replaced with a 249 style harness. the box mag runs off a 9v battery that is internally held in the case, operating off a pressure switch. I replaced the stock motor with a G&G high speed motor. the hopup has been tuned and the bucking was replaced with a G&G green soft, or an ics hard. i forget. hopup works great and can over hop a .3 bb
this thing rips like crazy on a 11.1 lipo, around 40 bbps! and its really nice on a 7.4 hitting around 19 bbps.
if you give me a good deal ill toss in the inert nato's and the sound amp to make it sound bad ass
it chronographs around 340's with the spring guide popped out and 390's w/ .2 with the spring guide pushed in, so its easly adjustable.
Uploaded with ImageShack.us
and can been seen in action right here. this is a 11.1 15c lipo
Attack & Defend 2-12-12 Lights Out Airsoft Team
I honor all of my guns with a guarantee type deal. If there's ever anything wrong with it just bring it back and ill fix it. Unless you run it over with a car or totally k'o the thing.
shoot me offers im willing to go as low as 200 if i have too dont expect that unless its up for months.
it has a madbull 455mm .03 barrel, shs 13:1 gears with shs Purple piston w/ steel teeth.
and king arms bushing bearings, modify tappet plate and a fresh e-switch in the trigger. the stock mosfet has been removed and replaced with a 249 style harness. the box mag runs off a 9v battery that is internally held in the case, operating off a pressure switch. I replaced the stock motor with a G&G high speed motor. the hopup has been tuned and the bucking was replaced with a G&G green soft, or an ics hard. i forget. hopup works great and can over hop a .3 bb
this thing rips like crazy on a 11.1 lipo, around 40 bbps! and its really nice on a 7.4 hitting around 19 bbps.
if you give me a good deal ill toss in the inert nato's and the sound amp to make it sound bad ass
it chronographs around 340's with the spring guide popped out and 390's w/ .2 with the spring guide pushed in, so its easly adjustable.
Uploaded with ImageShack.us
and can been seen in action right here. this is a 11.1 15c lipo
Attack & Defend 2-12-12 Lights Out Airsoft Team
I honor all of my guns with a guarantee type deal. If there's ever anything wrong with it just bring it back and ill fix it. Unless you run it over with a car or totally k'o the thing.
shoot me offers im willing to go as low as 200 if i have too dont expect that unless its up for months.
14
Airsoft Items WANTED / Re: 11" m4 outer barrel needed.
« on: November 13, 2012, 03:21:05 AM »
i got whatcha need geno hit me up man
15
Troubleshooting / Re: R-hop installation!
« on: October 02, 2012, 05:11:06 PM »
I can install an r-hop, or my own type of r-hop in anything except GBBR m4's the barrel design is different.
40 bucks a barrel includes bucking. so its a drop in upgrade
40 bucks a barrel includes bucking. so its a drop in upgrade