Airsoft Hardware > Gas Powered Guns

(1/3) > >>

Ninja:
A green gas rig will have the same problem that a CO2 rig will, you'll experience rapid cool-down on full auto.

A compressed air (scuba) rig or a nitrogen rig would work best. You could use a KWC rig if you want, they're available from www.airsoftpaintballs.com, and that will screw green gas cans onto your gun.  Keep in mind your seals will wear out with green gas.  

It would be ideal to use a compressed air rig with a low pressure regulator.  You should know the ideal operating pressures for your gun, which depends on whether it is stock or not.

-Bart

<img src="http://www.stopstart.fsnet.co.uk/smilie/tooledup.gif" border=0>
Typical airsoft game in Arizona: 11 Arab men in a van with assault rifles.

KamikazeSM:
How did you happen to come across a JAC MP5, and if you don't mind me asking, how much did it cost?

Yankee:
Ninja - So will the KWC seals wear out or the JAC ones?  I'd imagine
        the KWC seals would be easy to replace.  Would lube prevent
        the wear?  I also believe the gun is stock.

Kamikaze - I stumbled upon it on Airsoft Zone and basically stole it
           from the guy for $150 in used condition with no box or
           manuals.

Hail to the King baby....

Ninja:
Ok I had a complete post but a server error lost it.

So to summarize:

The KWC setup will plug into your existing external line built into the gun.  The problem with the KWC rig will be that it uses green gas, which will wear out your o-rings, etc. Like any Japanese gas gun.  You could replace the o-rings and try something more durable, like ones made of viton or teflon, but you don't really wan't to strip your gun down if you have no manual.

Check classicairsoft.com for info on gas rigs.

<img src="http://www.stopstart.fsnet.co.uk/smilie/tooledup.gif" border=0>
Typical airsoft game in Arizona: 11 Arab men in a van with assault rifles.

Yankee:
Classic Airsoft was the first place I went to for info.  This is my first forray into any type of externally supplied gun.  I'd really love to do a green gas rig because as I understand, putting together any other kind of rig is going to cost more than I am willing to commit to a gun that is really not going to see extensive firing.

Hail to the King baby....

Navigation

[0] Message Index

[#] Next page