Airsoft Arizona
Airsoft Hardware => Gas Powered Guns => Topic started by: Dustin_Burgin on August 30, 2015, 08:46:39 AM
-
(http://i24.photobucket.com/albums/c5/burgindustin/Mobile%20Uploads/FB_IMG_1440947368324_zpslkkejksp.jpg)
I would like to start with saying thanks for all the comments in my last topic! Secondly, I know the V12 system has a bad rap and it wouldn't have been my first choice if I didn't get a good deal on it. Please keep all comments productive!
I picked up a CM16 with a v12 preinstalled, red line regulator, ninja 62 3000 tank. It also has a Mad Bull Gemtech SD kit with longer outer barrel installed so that the silencer meets the end of the rail.
The Internet has very little information on the V12 system so I was hoping someone could point me in the right direction.
I plan on installing a 300mm 6.03 TBB with a R hop and was wondering what would give me the best set up for a 400 fps field rifle? What color nozzle and poppet? What settings for a 25 rps that won't waste any air?
Any comments other than switch to a P* will be greatly appreciated!
-
Quick update. Finally got moved in my new house and got to play a few games. I had some trouble with it Jamming on me. Come to find out that the lips on the G&G green bucking where folding in causing a pinch jam. I said F it and just changed out the barrel, bucking, and unit. It now has a 6.03 300mm TBB, prowin hopunit, modifiy bucking. I was also having some feeding issues settings. Went back to the stock settings and now it works fine. With my TBB and a gold nozzle I'm getting 395 FPS at 80psi with my dwell at 2. Command Post will be doing a custom injected R hop I will also do some testing a gold poppet and the red nozzle and let you know how it works.