Please read:-Will meet at vanguard or gearbox. Im in Mesa.
-Parent/Guardian must be present if you are under 18 and purchasing a gun.
-Number is
480 two zero one 5253 and email is jkejames22@gmail.com, text is best for me
If you want more pictures, ask.
Prices are OBO. GUNSA&K mk43. Replaced entire electrical harness.. Added my MOSFET, 16awg and 22awg FEP wires, lonex gold motor connectors, deans. SHS 15 steel piston, aluminum ported piston head with 2 o-rings, Prommy cylinder head, 6.03 tbb, madbull red bucking, Corrected AoE with sorbo, shimmed, greased, airseal mods done.
Box mag runs independently using 9V battery, with on/off toggle switch. A lot of time spent working on this guy.
Comes with 1 box mag.
UPDATE: R-hopped. Range and accuracy is much greater now; however, must use at least .28's
$320A&K m249 PARA. Core 13:1 gears, Core 15 steel teeth piston fixed rack, Core nylon piston head with viton o-ring and removed bearings, Core o-ringed air nozzle epoxied to a trimmed tappet plate, VFC POM cylinder head with 70D sorbo for AoE and PTFE tape for improved air seal, new 20A micro switch tweaked arm to work with trigger mechanism, 14.8v lipo rated MOSFET with 16awg FEP wiring, soldered directly to motor tabs and micro switch blades, deans, stabilized CA blue 6.04 tbb, R-hopped set for .28's, with all basic DIY mods done.
$320Comes with 1 box mag.
Tokyo Marui MC51. Nitro Vo rail sleeve & Knights Armament mc51 ris (hard to find).. Classic army piston swiss cheesed, classic army piston head with viton o-ring, random steel gears, JG Blue motor, 8mm steel bearings, metal spring guide, irregular m110, soft blue bucking, brass 6.05 crowned barrel. AoE corrected with 70D sorbo, trimmed tappet plate epoxied to nozzle, air seal mods, o-ring in various places to impove seal, basic DIY.
$offer Comes with (1) 500 high, (1) 20 low, and some original parts.
Beta Project Magpul AK. Fixed some minor problems. Was going to be a primary gun but decided not to... Bravo hardened 9 steel tooth piston, Bravo aluminum piston head, brass double o-ringed cylinder head. Sorbo, airseal, deans. Madbull 6.03tbb, tokyo marui hop up unit, nub, and bucking.
$270Comes with 1 beta project mid
Tokyo Marui AUG military. Viton O-ring, airseal mods, corrected AoE, new hop up unit, bucking, and nub.
$160Comes with 1 high cap, 4 mids. Classic Army and Tokyo Marui mags, and original hop up
UPDATE: Painted
KWA KP45. Shoots great, never any issues, just the mag slowly leaks. Also missing front sights.
$80Comes with 1 mag
VFC Krinkov AKs74u. Best feeling airsoft AK i've felt. Missing some hardware for rid, still pretty solid. Prommy 250 6.03tbb, replaced bucking, h-nub. SHS 13:1 gears, Blue 9-port piston head, JBU ported cylinder, JBU aluminum cylinder head with some padding, 16 AWG FEP wires all the way through, soldered directly to motor tabs, deans, and MOSFET. The rest is stock VFC. Pretty sure these aren't being sold anymore.
$260Comes with 1 high or 1 mid.
Firepower m4. Mostly plastic. Surprisingly had a decent metal gearbox, similair to JG. XYT gears and all… tuned and running smoothly. Shoots great. Front triangle sight is off-center.
$30LOL… price tag says $59.99…. runs off 6 AA batteries.
$10BONEYARD/PARTS GUNSKJW m700 takedown. Got in trade, never shot it since mag is leaky. No idea if it can be fixed, im not a gas guy. Was told it had some sort of power upgrade to the bolt.
$45Echo1 P90: 6.03 tbb. deans. Rubber stock extension.
Issues: No motor, gears, piston, piston head, or air nozzle. When put together, semi didnt work (likely the common cut-off lever problem)
Asking $40Cybergun licensed M1A1 thompson: purchased broken to fix and resell. Once fixed, price will likely double.
Issues: motor wont turn
Asking $40PARTS/EXTERNALS Random parts. Moslty m4 stuff. Some G36 and AK. If you see something you like, let me know
Scope risers/mounts
$10 eachFront end kit. Silver outer barrel is divided into 4 pieces. Free float rails. Bipod. WILL PART OUT
Want to trade for other front endNoveske upper, outer barrel, and flip up sight. Dust cover stays open. Cant get the fastener thingy off, or whatever you want to call it… no promises on this piece.
$15-Madbull ACE. No hardware (I believe you can use regular buffer tube screw and nut)
$offer$-G36k front end
$20-Noveske lower w/ knights trigger guard
$50Harris Bipod
$15Bushnell 3-9x40 scope
$offer$PBS4 silencer
$35$offer or trade$-Tokyo Marui g36 low cap
-Also have a bunch of Ak mags..
Ak front end by CYMA. Good weight to it. Including hop up unit and barrel. Like new
$30$10 Stocks for M4's
$10Buffer tubes…
$10-$20 M4 handguards
$5-$15NC star Red/Green dot. Have two of these, one needs batteries.
$10GEARNot pictured: German flecktarn set, Digital Woodland set, ACU set.
$10 Type 89 Ak chest rig.
ACU vest
$20INTERNALS/UPGRADES:
I have a bunch of stock internals so let me know if you need a small part..
Gearboxes. JG, ICS split, AGM, etc..
$offer$E1 HS motor; mint
Tokyo Marui eg1000;mint
(1) CA HT motors; new and little wear
Bunch of random stock motors
These are my MOSFET's. Rated to handle 14.8v lipo's. Using 16awg FEP and 22awg FEP wires.
$20WANTED-Fusion Engine V2, nozzles, tanks, etc.
-Torque short motor
-
Any nice gun that uses m4 mags-Madbull ACE SOPMOD stock
-Magpul PRS stock
-Magpul Motor grip
-R-hop, ER-hop, or anything related.
-torque gears
TECH WORK:I do tech work, and have for quite a while now.
Will not work on m14's or gbb's, as I have not done enough work on them to publicly work on them.
Small stuff, such as installing deans, barrels, buckings, pistons, cylinders, etc.. are generally free or very cheap.
1)
Basic maintenance $15 : reshim, grease, correct aoe with Sorbo, clean trigger contacts, clean motor brushes, clean inner barrel, examine any damage internally or externally. If you give me a DSG to shim, price doubles.
This should take no longer then 1.5 hours.
2)
Advanced maintenance $40 : basic maintenance^, polish gear faces, polish piston slides, swiss cheese piston, radius gearbox window, deans, change PH O-ring, short stroke (if asked), epoxy bushings (if asked), air seal mods, barrel stabilization if needed, shimmed hop up arm if needed.
This can be a bit time consuming, up to 5 hours depending on the gun.
3)
No-resistance treatment $35 : this is purely to ensure a Lipo-Ready gun. I make AND install MOSFET, rewire using only 16awg and 22awg FEP wires, deans, gold motor connectors if using v2, gold bullet connectors if v2 is wired to front, and clean contacts.
4)
A&K Mk43 Electrical solution $50: tired of the proclaimed "mosfet" that A&K put in their M60's? Tired of running both the gun and mag off the SAME battery? Well, let me help you out.
I will replace the entire electrical mess they have going on inside those things, as well as making the gun and mag run INDEPENDENTLY. I can also drop in a MOSFET, neatly tucked away out of sight. Ask for details
If you give me a gearbox already separated from gun, price will drop.
If you drive to me and pick up, price will drop.
If you combine 1-4 in any way, price will drop.
I will pay for/replace any damage done by me.
Well thats about it at the moment. Thanks for looking! Have a nice day.