Airsoft Arizona

General Airsoft Arizona => General Airsoft Discussion => Topic started by: TheRicktatorship on December 30, 2015, 09:42:42 PM

Title: How do I attach the threaded barrel attachment on my WE Tech 1911?
Post by: TheRicktatorship on December 30, 2015, 09:42:42 PM

As you may have read I want to know how do I remove the orange tip and replace it with the threaded tip? I've looked on YouTube and have found nothing helpful at all. The manual doesn't even mention it. So some help would be great, thanks in advance.

Title: Re: How do I attach the threaded barrel attachment on my WE Tech 1911?
Post by: Zanurath on December 30, 2015, 11:34:42 PM

Post the gun its not always the same. WE Tech makes quite a few 1911s

Title: Re: How do I attach the threaded barrel attachment on my WE Tech 1911?
Post by: TheRicktatorship on December 31, 2015, 08:03:21 AM

It is the WE-USA NG3 Metal 1911 Desert Warrior Railed Frame Heavy Weight Airsoft Gas Blowback Pistol

Title: Re: How do I attach the threaded barrel attachment on my WE Tech 1911?
Post by: Thor on December 31, 2015, 09:17:51 PM

from the pictures I'm seeing it looks like it look likes you'll need to use a heat gun to melt the glue and and twist. It should just come loose then.

Title: Re: How do I attach the threaded barrel attachment on my WE Tech 1911?
Post by: Zanurath on January 02, 2016, 11:53:23 PM

When I looked it up it seems to come with the orange tip being metal and threaded anything you might attach will be tight because of the paint on top of the threading but it should still work with anything threaded 14mm- I have a similar one and if you twist the orange tip it isn't very firmly attached and you can take off the treaded tip and replace the orange painted one with an unpainted one ( I believe Evike stocks them) if you don't like having to crank it through the paint