Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - Ethan333

Pages: 1 [2] 3 4
16
Multiple items added! More you buy more price reduction
I have 3 never used Cyma gearboxes. They are just dirty from storage I have not been able to test them but they have everything included and are in original boxes. Also have an unknown brand Mp5 gearbox. All come with motors and motor cages 30$ for each or 100$ for all
ICS split gearbox shells. 1 lower and 3 uppers not parting 55$ for all
Never opened still in packaging Systema and SRC upgrade parts: selector plates, spring guides, tappet plates and much more 35$ for all
Send me a text for pictures and more info 714-916-8974 150$ takes it all can meet at VIP or pickup at my house in Gilbert. Will ship if your too far
I have 7 brand new in the box 300% bore up cylinder kits for snipers. 40$ a piece retail 100$
Also have 10 plus g36 high caps and 10 plus aug hi caps and 5 plus aug mid caps 6$ per mag

17
Airsoft Items FOR SALE / WTS ONLY lot of internal and external parts
« on: June 24, 2015, 04:51:08 PM »
I have a bunch of internal and external parts but I can't figure out how to post pics... So text me 714-916-8974 test me for pics and any questions you have
What I have
1: mix of polymer Pistons all with 1 metal release tooth
2. Mix of piston heads (not the best quality)
3. Mix of cylinder heads single and double o rings
4. Mix of tappet plates
5. Mix of selector plates
6. Mix of Anti reversal latches and cut off levers
7. Mix of different gear sets of different brands
8. Mix of springs for almost all the parts in v2 and v3 guns
9. Mix of mag catches and pins
10. Trigger contact parts
And more pm me for pics questions and prices

18
AEG's / Irregular pitch springs?
« on: June 04, 2015, 01:33:57 PM »
Looking to start teching very shortly (I have a work bench and everything set up) I feel I have a gods knowledge of v2 and v3 gearboxes to start basic teching but there's one thing I still don't know. What does it mean when a spring is shown as irregular pitch?

19
i have a tm hi cap with four HPA tapped mags two 32 rounders and two 52 rounders they all work great, only problem is the rear sight fell off but it does not affect performance at all i can't figure out how to post pictures so text me at 714-916-8974
it has a custom grip and grip screws and is short stroked

20
hey guys I have some brand new Socom gear m4 externals. They are full metal and have never been fielded. The rails are 7 inch Daniel defense omega rails. They retail at 105$ looking to sell only need cash ASAP looking for 120$ obo
Text me at 714-916-8974

21
like it says i need a gen 3 polar star engine i have a v2 SMP wolverine engine to trade for it i can add a little cash or a trade as well

22
Airsoft Items FOR SALE / WTS SMP'D ARES honey badger
« on: April 12, 2015, 02:44:49 PM »
I have an ares honey badger with an SMP unit installed i am looking to sell for 700 with the gun line and reg, SLP reg and carbon fiber tank the only trade is for a TM Breacher plus cash or a 1911 carbine kit with extras plus cash  text for info and pics please 714-916-8974

23
Airsoft Items FOR SALE / WTT VFC 416 externals
« on: February 14, 2015, 02:24:46 PM »
I have a VFC 416 that I have my SMP in and I'm looking to trade it for another type of m4, looking for something CQB friendly that my SMP could easily fit into text for more details and questions if you have anything to offer, also any offers need to include mags 714-916-8974

24
Airsoft Items WANTED / WTB a v2 gearbox ASAP
« on: January 18, 2015, 07:39:27 AM »
Hey guys just got an SMP and the gearbox I have in my m4 won't work with my SMP so all I need is a V2 gearbox shell with it's trigger assembly in it I have cash and I need this very very soon thanks in advance 714-916-8974

25
Airsoft Items FOR SALE / WTS KWA ERG
« on: December 25, 2014, 08:15:44 PM »
I have a KWA erg that needs a little touching up I've taken it to a tech and it was fixed for a couple days although it stopped working again I think that it might be the  motor but im looking to sell it quick to get a new gun
The gun will come with: The KWA erg, a PEQ box with a Lipo in it, 10.5 inch Knights armament rail system and one high cap maybe some mids depending on the deal and a lipo charger
For the gun and everything I'm looking for around 230$

You can contact me at 714-916-8974 please text only

26
Airsoft Items FOR SALE / WTS A Bunch of stuff
« on: September 13, 2014, 10:11:16 AM »
I have some airsoft items and a few non airsoft items for sale not looking for trades prices are negotiable but not by much I prefer to meet at vanguard
_-_-_text me at 714-916-8974
1. Angel custom m4 to mp5 mag well adapter+a high cap mp5 mag+an SMG magpul -20$
2. Fore grip/spring loaded bi pod in black 15$
3. Regular foregrip that twist at the bottom to loosen/tighten -10$
4. Lancer tactical silencer (no end cap really just an amp) 10$
5. Regular bi pod lengthens and collapses 10$
6. 4X Long black rail covers 5$
7. Battery box PEQ box 5$ black
8. 8X 30rd shotgun shells 15$
9. Black ops 1 and 2 and MW3 for xbox 360 15$ a game
10. Boneyard echo 1 timber wolf text for additional info 25$
11. Elite force 1911 tac with Hardshell holster and one mag the gun works the mag doesn't Comes with around 10 co2 cartridges 50$
12. Magpul rail covers 4X black 4X pink 10$ for 4

27
Airsoft Items FOR SALE / Price drop WTS CUSTOM KWA ERG
« on: September 09, 2014, 01:01:32 PM »
FOR QUESTIONS OR IF YOUR INTERESTED TEXT ME AT 714-916-8974
I have a KWA ERG with a 10.5 inch KAC rail system. it will come with the gun wit the rails on it a red dot with a riser (not sure on brand, similar to a T-1) also has a kill flash on it has a rear magpul sling mount and will come wired to deans with a lipo battery fitted into a PEQ box on the top rail. Also has a black metal flash hider.
Gun background I am the second owner I recently traded for it and the gun performed nicely however the electrical cut off that engages when you run out of ammo is stuck so it won't shoot right now, I have tried to re engage it with a screw driver as shown on you tube videos I watched on this problem (which turns out to be very common on ERG's) but I just haven't been able to re engage it. Plus I have terrible teching skills so if any of you are interested in my gun you should be able to get a tech to fix it easily
For the PRICE of the gun with the Gun,rails,lipo/PEQ,1 high cap,red dot and possibly some iron sights I'm looking for around 350 obo price drop 300 negotiable upon text if you have any questions or are interested
TEXT ME AT 714-916-8974

28
Airsoft Items WANTED / TM M870
« on: July 25, 2014, 06:04:19 PM »
Looking for a TM M870 gas shotgun have a VFC scar L to trade

29
Airsoft Items WANTED / Also looking for a VFC 416
« on: July 23, 2014, 04:01:52 PM »
I am looking for a VFC 416 all I have are trades just text me if you have one and we'll see if we can make a deal 714-916-8974

30
Airsoft Items FOR SALE / Magpul FPG
« on: June 15, 2014, 11:13:55 AM »
Hey guys today I am looking to sell my magpul FPG this is the limited edition discontinued (I think) black and pink magpul FPG it will come with the FPG the one with the gun inside it and 3 extended magazines the FPG is a little dirty I got it in a trade problems with It are it's only full auto and needs a new outer barrel(it doesn't have one now) all mags are working they hold gas and I just had new I rings put in again they are a little dirty the previous owner didn't seem to take much care of it
For the gun and all three mags I am mainly looking for cash but I am also really looking for a glock 18
Now to the price I am looking for is 250 but it is very negotiable and like I said I am really looking for a glock 18 to trade if you do trade a glock 18 for my FPG I am going to keep one mag of mine unless you have multiple for your glock you can contact me at
714-916-8974

Pages: 1 [2] 3 4