Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - AzAirsoftInnovations

Pages: [1] 2 3
1
Local Games Listing/RSVP / Re: Hatfield game!!! 12/18/11
« on: December 13, 2011, 11:46:05 PM »
Worried about a lil rain?  Think you might melt?  AEGs should hold up to a lil moisture... I've played in heavy rain and snow.  Unless others are not willing to get a lil wet, I should be there in green.

Airsoft Classic Army M4 in water

here ya go!
actually met this kid playing with the belcherboys in tampa bay florida

2
I will also be there doing Chrono, dont sweat the fps rules, and people cheating them.

I will be there with a bag of bb's and my chronograph.

markers will be placed on every Airsoft rifle chronographed.

 No marker on the gun during play means it wasnt chronographed, and you will be set to game control for rule violation.

i will be doing chrono with .25 bb's will make sure every rifle, has field set hopup. Meaning I will shoot the gun down range before i chrono it. this is to insure people arn't cranking there hop up alll the way on to skip past chrono.
Anything over 375 Fps On a .25g bb, Has to be semi auto Only. No exceptions.

MAX FPS @ 375 FULL AUTO.
MAX FPS @ 600 BOLT ACTION/SEMI AUTO SNIPER 100 Foot Enguagement rule.

3
slinkey: that isnt even an expencive benz.

and yes i know my grammer and spelling suck too.

50,000 used for a 2009 is a pretty fuggin expensive car if you ask me.

If he wants to post it for 1000 dollers thats his deal, if he will or will not sell it thats up to him. stop harping him kids

4
Troubleshooting / Re: g36
« on: November 01, 2011, 09:41:09 PM »
if your g36 has been used alot, Like over 50k rounds, and depending on what year it was manufactured. I can allmost guarantee its your Plastic bushings are giving out, or your wiring contacts failing.

I highly doubt its your motor, that is becuase the JG, and Echo1 clone motors are Some of the most reliable motors on the market, They can handel anything you throw at them and I'v rarly seen one burn out.

If the Gear box has been worked on previously, that could be your problem but i highly doubt it.
Like was mentioned, try a different battery and if it is still the same result, take it some where and get it fixed.

I can allmost guarantee its eather the bushings, Or wiring harness failing, as that is the most common problem that causes that version gear box to just make the click click in the Grip area of the gun.

Or it could be the dumbest problem in the world, with your trigger disenguaging on the contacts prematurly, Or a broken anti reversal latch.
 little more info would help alot more.

5
heres a small list of the products we can get, we can get aalot more than this of course lol





GEARS:
 
"Matrix" Steel CNC "Low Noise" Airsoft AEG Gear Set (High Torque) / 100:300
  $40.00
   
 
"Matrix" Steel CNC Airsoft AEG Gear Set (High Speed) / 16:1
  $40.00
   
 
"Matrix" Steel CNC Airsoft AEG Gear Set (Standard Torque) / 18:1
  $40.00
 
 
 
"Matrix" Steel CNC Airsoft AEG Gear Set (Super High Speed) / 13:1
  $40.00
   
 
"Matrix" Steel CNC Airsoft AEG Gear Set (Super High Torque) / 32:1
  $40.00
   
 
AIM Monster Infinity Torque Up Gear Set w/ Piston for Airsoft AEG Rifles
$49.99
 
 
 
AIM Top Steel Motor Pinion Gear for Airsoft AEG (Round Shaft)
$10.00
   
 
AIM Tornado Infinity Speed Gear Set w/ Piston for Airsoft AEG Rifles
$49.99
   
   
 
Element Steel Flat Spur Gear Set for R85/L85 Series Airsoft AEG
$30.00
 
 
 
Element Steel Flat Spur Gear Set Original Ratio 18:1 for Airsoft AEG
$30.00
   
 
G&G AEG Helical Gear Set Hyper-Torque Gear Set for M120 Springs.
$59.99
   
 
G&G Hyper Torque Helical Gear Set
$64.99
   
 
G&P Reinforced Piston Set (A) (for 230mm Inner Barrel)
$40.00
   
 
G&P Reinforced Piston Set (B) (for 400mm Inner Barrel)
$40.00
 
   
 
G&P Reinforced Steel Gear Set for Airsoft AEG Ver. II/III Gearbox
$45.00
   
 
G&P Super Torque Up Spur Gear for Ver.7 Airsoft AEG Gearbox
$16.00
 
 
 
Guarder Infinite Torque-Up Gear Set for Version II/III A.E.G.
$49.99
   
 
Guarder Reinforced Flat Spur Steel Gear Set for TM AEG II/III Original Type.
$44.99
   
 
Guarder Steel Bevel Gear for Ver. II/III Original Type Airsoft AEG Gearbox
$19.99
 
 
 
Guarder Steel Gear Set for TM AEG Ver.7 Gear Box (M14).
$39.99 
   
 
Guarder Steel Sector Gear for Ver. II / III Original Type
$19.99
 
 
 
Guarder Steel Spur Gear for TM AEG Ver.7.
$19.99
   
 
Guarder Steel Spur Gear for TM II/III Original Type.
$19.99
   
 
JG / Echo1 Reinforced Steel Gear Set for V.2 / V.3 Airsoft AEG Gearbox
$20.00
 
 
 
Matrix Airsoft AEG Sector Gear Clip / Delayer for AEG gearbox
$7.00
   
 
Matrix APS Complete GEAR Set for Airsoft AEG Mech / Gear Box
$30.00
   
 
Matrix Sportsline Steel Gearset for V.2 & V.3 Airsoft AEG Rifles
$30.00
 
 
 
Matrix Steel Motor Pinion Gear for Half Moon Shaft type Airsoft AEG motors.
$12.00
   
 
Modify Steel Pre-shimmed SMOOTH 6mm Gear Set for Marui Ver.2/Ver.3, Torque 21.6:1
$90.00
   
 
Modify Steel Pre-shimmed SMOOTH 7mm Gear Set for Marui Ver.2/Ver.3, Speed 16.32:1
$90.00
 
 
 
Modify Steel Pre-shimmed SMOOTH 7mm Gear Set for Marui Ver.2/Ver.3, Torque 21.6:1
$90.00
   
 
Modify Steel Pre-shimmed SMOOTH Gear Set for Marui Ver.2/Ver.3, Speed 16.32:1
$90.00
   
 
Modify Steel Pre-shimmed SMOOTH Gear Set for Marui Ver.2/Ver.3, Torque 21.6:1
$90.00
 
 
 
Prometheus Reinforced Airsoft Guns AEG Gear Set - (Double Torque)
$120.00
   
 
Prometheus Reinforced Airsoft Guns AEG Gear Set - (High Speed)
$120.00
   
 
Prometheus Reinforced Airsoft Guns AEG Gear Set - (Standard Torque)
$110.00
 
 
 
Real Sword OEM Replacement Bevel Gear for RS Type 97/56 Airsoft AEG
$14.99
   
 
Real Sword OEM Replacement Sector Gear for RS Type 56 Airsoft AEG
$14.99
   
 
Real Sword OEM Replacement Sector Gear for RS Type 97 Airsoft AEG
$12.99 
   
 
Real Sword OEM Replacement Spur Gear for RS Type 97 Airsoft AEG
$12.50
   
 
Spare Stock Bevel Gear for Airsoft AEG Gearbox
$8.00
 
 
 
Spare Stock Sector Gear for Airsoft AEG Gearbox
$6.00
   
 
Spare Stock Spur Gear for Airsoft AEG Gearbox
$6.00
   
 
X-Player 16:1 Phoenix Type Super High Speed Gear Set (M110/120)
$50.00
  _______________________________________________________________________________________________________
CILINDER KITS:
 
   
 
AIM Bore-Up Silent Cylinder Set for AK Series Airsoft AEG
$48.00
 
 
DBOY Cylinder / Cylinder Head / Piston / Piston Head Set for Airsoft M4 / M16 / SCAR Series AEG Gearbox
$25.00
   
 
Guarder / MOdify Bore-Up Cylinder Set for MP5 / Mod5 Series Airsoft AEG
$54.99
   
 
Guarder / Modify Bore-Up Cylinder Set for MP5-K / MOD5K / PDW
 Series Airsoft AEG $54.99
 
 
 
Guarder Bore-Up Cylinder Set for AK47 Series Airsoft AEG
$54.99
   
 
Guarder Bore-Up Cylinder Set for AUG Series Airsoft AEG
$54.99 
 
 
 
Guarder Bore-Up Cylinder Set for G36 Series Airsoft AEG
$54.99
   
 
Guarder Bore-Up Cylinder Set for M16-A1 / VN Series Airsoft AEG
$54.99
   
 
Guarder Bore-Up Cylinder Set for M4 / M16 Series Airsoft AEG
$54.99
 
 
 
Guarder Bore-Up Cylinder Set for M4A1 / SR16 / M733 Series Airsoft AEG
$54.99
   
 
Guarder Bore-Up Cylinder Set for MC-51 / G3-SAS Series Airsoft AEG (Short Barrel G3)
$54.99
   
 
Guarder Bore-Up Cylinder Set for SIG551 / SIG552 Series Airsoft AEG
$54.99
 
 
 
Guarder Bore-Up Cylinder Set for XM177 / M4 Stubby Series Airsoft AEG
$54.99
   
 
Guarder Cylinder Enhancement Set for TM M4-A1/M4-RIS/SR-16/M733.
$59.99
   
 
Guarder Cylinder Enhancement Set for AK Beta / Compact AK Series Airsoft AEG
$59.99
 
 
 
Guarder Cylinder Enhancement Set for AK Series Airsoft AEG
$59.99
   
 
Guarder Cylinder Enhancement Set for G3 / PSG-1 Series Airsoft AEG
$59.99
   
 
Guarder Cylinder Enhancement Set for G36C / MK36C Series Airsoft AEG
$59.99
 
 
 
Guarder Cylinder Enhancement Set for M4 / M16 Series Airsoft AEG
$59.99
   
 
Guarder Cylinder Enhancement Set for MC-51 / SAS Short Barrel G3 Series Airsoft AEG
$59.99
   
 
Guarder Cylinder Enhancement Set for MP5K / MP5-PDW Series Airsoft AEG
$59.99
 
 
 
Guarder Cylinder Enhancement Set for P90 / E90 Series Airsoft AEG
$59.99
   
 
Guarder Cylinder Enhancement Set for TM AUG Series.
$59.99
   
 
Guarder Cylinder Enhancement Set for TM M14 Series Airsoft AEG
$59.99
 
 
 
Guarder Cylinder Enhancement Set for TM MOD5-A4/A5/SD5/SD6.
$59.99
   
 
Guarder Cylinder Enhancement Set for TM SIG-551/552.
$59.99
   
 
Guarder Reinforced Stainless Cylinder Set for Type 96 Series Airsoft Sniper Rifles
$135.00
 
 
 
Matrix CNC CU150 Cylinder Unit for Systema / Celcius PTW / CTW M4 MAX Series
$90.00
   
 
Systema Bore-Up Cylinder Set for KPSG-1.
$99.99
   
 
Systema Bore-Up Cylinder Set for M4 Series Airsoft AEG
$85.00
 
   
 
Systema M90 Cylinder Unit for PTW M4 and Gen 3+ A2 / A3.
$170.00
   
 
Systema MP5 Bore-Up Cylinder Set for MP5-A4.
$70.00
   
 
____________________________________________________________________________________________________________
LONG SHAFT MOTORS:
 
 
 
* Matrix High Performance Airsoft AEG Turbo Motor - Long Type.
$45.00
   
 
G&G Strong Torque Motor - Long Type.
$45.00 
   
 
ICS Turbo-3000 Reinforced Long Type Motor
$51.00
 
   
 
Matrix High Performance Magnum Airsoft AEG Motor - Long Type.
$45.00
   
 
Matrix Motor and Casing for Army / G&G L85 Series Airsoft AEG Rifles
$30.00
 
 
 
Stock Long Type Airsoft AEG motor from Evike.com Tech booth
$20.00
   
 
Systema ENERGY Series "A to Z" Motor for Airsoft AEG Rifles - Long Type
$99.99
     
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ _ _ _ _ _ _ _ _ _ _ _ _
SHORT SHAFT MOTORS:
 
 
* Matrix High Performance Airsoft AEG Turbo Motor - Short Type.
$45.00
   
 
*Matrix High Performance Magnum Airsoft AEG Motor - Short Type.
$45.00
   
 
AIM High Performance Airsoft AEG Monster Torque-Up Motor (Short Type)
 
 
 
AIM High Performance Airsoft AEG Tornado Speed-Up Motor (Short Type)
$45.00
   
 
G&G High Torque Airsoft AEG Motor - Short Type
$45.00
   
 
G&G Original Torque Airsoft AEG Motor - Short Type   
 
G&P M160 Ultra Custom Turbo Charger Airsoft AEG Motor. (Short Type)
$80.00
___________________________________________________________________________________________________________
TIGHT BORE BARRELS:
we can get Mad bull, prometheus, laylax, systema, JBU, AIM Matrix and Modify barrels, just tell us a length and we can get it.

6
Airsoft Items FOR SALE / Re: Guns for sale UPDATED 8-20-11
« on: October 31, 2011, 09:10:42 AM »
bump

7
just want to let you guys know, We can modify, ak's, thompsons, and m14s into Electirc blow backs

If you ever wanted that We 14 for that sweet bolt movement, but you were too cheap to afford that beast Now is your chance.

http://www.youtube.com/watch?v=jNhbpXQhauY&feature=player_detailpage

Im probably one of 20 people in the world that can make an EBB m14.
the only downfall is the battery type you use, It is not recomended to go over a 9.6v 3300 mah, as the blow back adds extra stress on you piston. But we can also install a reinforced piston, to compensate for it.

message for more info.

and thanks for the feedback, you guys rock!

8
AAI will be sponsering this event, We will have products for sale at our booth. A BBQ at lunch and possibly even raffle something off!

9
Airsoft Items FOR SALE / Re: Guns for sale UPDATED 8-20-11
« on: October 17, 2011, 09:38:37 AM »
after the like 4 months f messing with it too.. Ehh ares.... :o

10
AEG's / Re: Gear Set Suggestions
« on: October 17, 2011, 09:34:35 AM »
they dont look anything like a SHS gear set

In my honest opinion i would think there knock offs of the seige tech gears.. I mean they Did knockoff the DSG a few months before these were released.. and they look just like seigetech's

the 13:1s are going to be ur best bet. ur stockers are actually probably 16:1 or 18:1 depending on brand

11
Airsoft Items FOR SALE / Re: Guns for sale UPDATED 8-20-11
« on: October 17, 2011, 09:23:18 AM »
Indeed it is bro, only difference is this one has a high speed/high torque motor

12
AEG's / Re: kwa shooting issues
« on: October 12, 2011, 11:51:19 AM »
Do you know how old the gun is?

first thing i would do is Make sure its all air tight. cilinder, cilinder head, nozzle and bucking to barrel seal. Seems like that could be the issue.

If its not that i would start looking at the air nozzle, cilinder head or tappet plate for wear. if it is an older gun that shit could wear out.

Then after checking all of that and it was all good, still shooting with same results, i'd replace the bucking make sure its not warn causing the problems.

Another one would be to check the hop up nub. Alot of people think you can just drop in a H nub and get a huge gain in accuracy from that.. sadly thats not how it works.. thats just going to cause it to eather jam, or tear the bucking.
causing simular problems to what you have.

try just lubing the hell out of the barrel with some silicone spray first and see if it still has same results

13
Local Games Listing/RSVP / Re: skunk creek 10-16-11
« on: October 12, 2011, 11:44:14 AM »

I've run two 11.1 its cool but pointless lol

Agree'd other then the fact of having no one with the balls to approch you,
thats actually like a 24v 12,000 mah battery, Simular to the ones that run a mini gun.

I use it to make sure my shits going to handle everything i throw at it.
so when i use a 11.1 lipo i know its good to go.

14
Introduce Yourself! / Re: Hello all!
« on: October 12, 2011, 11:39:34 AM »
welcome to aa..
i find it funny how chicks allways get like 50 dudes sayin welcome to the forum..

its like highschool all over again.. OMG BOOBS!

15
AEG's / Re: kwa shooting issues
« on: October 12, 2011, 11:32:29 AM »
bucking air seal/hopup/ dirty barrel. Iv just solved this exact problem on a sr12 and a sr10

lemme guess it shoots great on full auto, except for like the first 5 bb's.
and semi auto is a joke right

Pages: [1] 2 3