Rules:

Absolutely no trades.
No lowballs.
No thread jacking.
Price is firm.
No refunds, I have explained everything everything to the best of my ability.

I'm wanting to sell of my PolarStars quick. I'm running a V2 Gen3 engine with a blue nozzle in a KWA KM4 body. Internally, there is a Madbull 6.03 with the KWA bucking and hop up unit. I have done the trigger mod, it's not a hair trigger, but the trigger pull is shortened. Because of this, when turned to safe on the selector switch, it will still fire. Installed is a Madbull MK18 rail, MOE grip, and a Madbull KA-1222A flashider. The gun runs as it should, and I have not experienced any problems whatsoever.

No accessories or attachments are included with the gun. The CTR stock and ASAP sling mount are not included. I will however put on a ambidextrous dual sling mount.

I'm looking for $500 via PayPal.








KWA LM4 Magpul Edition

Gun is in good external condition. This is the rare LM4 with the Magpul lower receiver. I'm the second owner, and my local field doesn't allow the use of it, so I haven't used it much. Internally, it needs a new bucking, KWA stock buckings are pretty bad, sometimes BBs will just roll out the barrel. Gun cycles fine though. Mags do have a small leak, but probably just needs to be lubed or needs O rings.

I will include the gun, three standard LM4 mags, one LM4 PMAG, Noveske 10 inch rail, Diamond Tactical RD3000 red dot, and a Magpul AFG. The pictures do not show the included attachments, but they are included. I will not be including a stock as it was stolen, and I am borrowing my friend's stock for the photos.


I'm looking for $350, price is very firm.






TM Custom 5.1 Hi Capa

I got this gun in a trade a little while ago. It is a TM Hi Capa 5.1 base. I rarely ever use my main secondary weapon, and this sees no use. It will come with 7 mags total. 2 TM (I believe) standard mags. 3 IPSC mags. 2 TM (I believe) long mags. One long mag leaks. Not sure about the other mags, I don't have any green gas to test it out on. I don't believe the other mags have leaks. Not 100% sure though.

This thing is smooth. The trigger pull is nice and crisp. When racking it, there is no hiccups whatsoever. The purple slide paired with the gold screws just make the gun pop out. There is a scratch/scuff on the grip right by the magwell. This does not affect performance at all. The Airsoft Masterpiece slide does not have a front sight, but does have a rear sight. I do not see anything else that should be concerning, but I have not really used it at all. All I know is that this gun fires like a beauty and is smooooooooooth.

Parts currently installed:
-Airsoft Masterpiece Infinity Slide
-Airsoft Masterpiece Aluminum spring guide
-Angel Custom 6.01 x 113mm tightbore barrel
-Reaps MG1 Bucking
-TM Hop Up Unit
-TM Housing Unit
-TM rear sight
-TM outer barrel

I have some extra parts that I'll include:
-WE ultra precision barrel
-WE Hop Up Unit
-WE? Blowback housing
-WE? Nozzle
-WE? Rear and Front sight
-Stock TM inner barrel
-TM hopup bucking
-WE hopup bucking
-CQB Master Metal Slide
-CQB Master outer barrel

For this entire package, I'm looking for $300 CASH ONLY, no trades.







Mayflower APC


Got this around March of this year. I only play indoor CQB, and this plate carrier has not seen the light of day. I am not the player to roll around on the ground or abuse my gear. This has been used around 5 times total, and I'm wanting something else.

This is a size L/XL in Multicam. The cummerbund is a small. It can fit medium plates as well as large and XL plates. The cummerbund can be easily adjusted to accommodate different body sizes. It will come with the Mayflower Triple Mag insert as well as a Condor Hydration carrier.

I'm looking for $150.






KWA MP9 Tan

I'm not a big GBB person except for pistols. I haven't used this much. For some reason, the gun will stop cycling when shooting, not sure why. I don't want to really mess with it so I'm going to sell it for cheap. Comes with the MP9, dangerwerx threaded barrel, CQB bolt, and 3 mags. One of the mags have a follower that is stuck, most likely a BB jammed in there.

Looking for $150.






KWA MP9 Black

Gun is missing a few parts parts here and there. For some reason I can't get the upper receiver on. Comes with a mag and the CQB bolt installed.

Looking for $90.






I also have a Orga barrel setup. It has an Orga 6.23 400mm barrel, ProWin Hop Up, Maple Leaf bucking, and Namazu Flat hop. Note that this will not fit into the KWA body without modification.

I'm asking $80.



Shoot me a text. 480-721-0580. Serious inquires only please.

I'm in need of an R-Hop service quick. You must be credible and have done other previous R-Hop installs in the past. I have many thing to trade as well as cash. Shoot me a PM.

So on Monday, my phone slipped out of my pocket and fell into a storm drain. It could have fallen out out anywhere in the 30 minutes I was walking, but it had to fall right when I was walking by a storm drain.

I called the City of Phoenix, and was transferred back and forth to different departments for about an hour. I was told by Sewer that they did not have the personnel trained to open up the manhole that led into the storm drain. Funny, because if they didn't have the personnel to open it up, then why would they even build a manhole in the first place?

It is about six or seven feet deep, and my phone is down there. I've tried putting duct tape on a pool noodle to try to stick it onto my phone and fish it out; it stuck on for about two seconds and then fell off. I'm really in a tough situation right now, and any help would be great.

The storm drain looks similar to this: http://cdn.citylab.com/media/img/citylab/legacy/2012/10/24/StormDrain.embed.jpg
http://images.tbd.com/communities/storm-drain-tbdstaff-0930_606.jpg

Hey guys, looking to buy a Tokyo Marui 5.1, as I'm getting into race guns. If you already have a complete package to sell, please let me know!

I have cash as well as trades ready on hand.

Please text me at: 480-721-3391.

Hey guys, just like the title says, I'm looking for a nice DSG setup.

M4 style preferred, and am just looking for that crazy rate of fire.

Let me know what you guys have, because I'm willing to trade a custom VFC 416 Polar Star!

I just got a ProWin M4 hop up and a Prommy Soft Bucking for my Polar Star and when I installed everything, the magazines would not feed properly. It would shoot a couple of BBs, and then stop, and I would have to take out the mag and put it back into the gun and this same process would repeat itself. I use E-Mags and Elite Force Midcaps. When I had my stock plastic VFC hop up, I had no problems whatsoever with feeding.

I haven't lubed and cleaned my mags in a while, would that be one of the reasons why its not feeding properly? Or would the issue be the hop up itself?

Some help would greatly be appreciated. Thanks.

Looking into building another custom M4. I want it to be a high speed setup meaning I would like it to be 45+ RPS. I'm not sure what my base gun is as of now, but I'm thinking about a Combat Machine because they are fairly cheap and I've heard the polymer is very strong.

 So I've heard some good things about a DSG setup, and I've been thinking about getting the Siegetek Cyclone gear set. Now does anyone personally own these? Because I don't want to waste $115 on a set of gears when I can get something that is cheaper and performs the same.

 Also, if I do get the Siegetek Cyclone gears, what motor should I use? I would prefer not to use Systemas because they are overrated and I know I can get better for a lower price. Would it be appropriate to get the Lonex High Speed motor with the Siegetek Cyclone gears? Or would I be better off getting a high-torque motor?

 I know the Sigetek Cyclone gears can be pretty stressful, but I have a reinforced gearbox so it shouldn't be too bad. To handle all the stress, what bushings/bearings should I use? It has to be 8mm.

 Should I also upgrade anything else? I've been thinking of getting a nice MOSFET, if you could recommend any that would be great. I will be running a 9.6 NiHM battery for a while, but am planning on switching to A LiPO later.

 So if you guys could recommend anything for a high speed setup, that would be great. Also, the FPS has to be under 350 FPS and I would like this project to be under $350. Thanks and have a great day.

I have a KWA KMP9 in very good condition. This is the tan NS2 version with the built in foregrip at the front. I don't think any wear is visible externally, and internally, this gun is in very good condition.


It comes with:
KWA KMP9 NS2
3 48 round mags (perfectly working!)
Dangerwerx threaded black outer barrel
KWA CQB bolt
KWA Original Bolt
Hop Up Adjustment Tool
Manual, warranty information
Orignial Box

Asking $265 OBO.

Also have a black KWA KMP9 NS2. The left notch on the rear sight is chipped, but does not affect performance whatsoever. The second thing is that it needs a new stock catch, so the stock doesn't lock in place when folded. Still locks when extended. Again, no performance taken away.

It will come with:
KWA KMP9 in black
CQB bolt
1 48 round mag.

Asking $165

I can mix the mags for the MP9s, for example, instead of 3 mags for the tan and 1 mag for the black, I can do 2 for the tan and 2 for the black.

All prices are OBO, but please don't lowball.
You can text me at: 480-721-0580 for photos or more info. No calls please.

CASH ONLY!!