Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - poinierdude

Pages: [1] 2 3 ... 10
1
Airsoft Items FOR SALE / Classic army sportline parts gun and ACU shirt
« on: January 16, 2012, 08:38:24 PM »
Title describes it all, the gun fires and has all parts except for the forward assist.  The handgaurd is secured with some string, because the front sight is too far forward.  Very sturdy however.  The body is cracked so the rear pin does not insert, but it does not affect anything.  Has http://www.evike.com/product_info.php?cPath=25_109&products_id=28264, a stock G&G hopup with <50 rounds through it, a JB unicorn 6.03 509mm barrel, a rail, and a bipod grip.  Right There is well over $60 dollars worth of stuff, and I will part out anything.  I am only looking to ship, I cannot meet up with anyone. Offer for what you want, and how much you will be willing to pay, and shipping depends on what you order.  Acu shirt I am looking for $20 shipped, it is very high quality and no rips or anything.  Size large.

Box of parts, all for sale or i can put them back on the gun.


Front handgaurd, where rope is holding it tight.
  

Bipod grip and rail

     

Receiver and rear sight.



And last, but not least, the shirt.



Text me at 602-541-0860 if interested.  Anytime before 10:30 pm or after 6:00 AM is fine.


2
Airsoft Items FOR SALE / Re: Poinierdude's starting over sale
« on: October 16, 2011, 11:16:25 PM »
OK, I am not going to be able to meet anyone for the next month for this, so I am doing it shipped only.  I will ship it for $100 dollars, and I am losing a bunch of money on it.

Also, I am now selling a WE m14 that has an unknown problem and will not shoot.  I do not know the internals of it, and do not see anything wrong, but I have put probably 800 rounds down range and when I went to go shoot this morning, it won't anymore and the trigger will not reset.  Everything is there I am pretty sure, but there may be a pin or screw missing or something.  I am looking for $250 shipped.  I will take a picture later, but not much to see, just a standard m14 with one mag. (No leaks)  Anyone who is familiar with gas guns, this is a steal.

3
Airsoft Items FOR SALE / Poinierdude's starting over sale
« on: October 10, 2011, 09:36:09 PM »
Hey everyone, I have decided that I want to start again how I play airsoft.  So, I am getting rid of all of my stuff to buy new things.  The only things that I want to trade are:

1. A silver 1911 hi-capa scope mount
2. OE tech battle belt and harness
3. 40mm pouch in tan or same color as battle belt/ harness
4.  CASH!!!



The only thing left is a Classic army sportline M16A3.  Only problem is that the rear body pin does not fit, gun cycled a month ago, but it had no barrel so I have no idea how well. I have no battery to test now, but it sounded fine to me. I just installed a brand new G&G hop up unit with an H-nub in it, as well as a JBU 6.03 509mm barrel.  Wired to rear, sorry full stock is gone.  Has an HK416 rear sight, http://www.airsoftgi.com/product_info.php?cPath=36_119&products_id=5032 that one.  The handgaurd is loose so I but a small length of bungee chord between the front sight and the end cap, so that it is rock solid.  (Sight is non-removable for some reason.)  Otherwise gun is great, no magazine is included.  Asking $100 dollars, i know it seems a bit high, but just the barrel, bipod, rail, and sight was 60 bucks.  Includes really crappy large-type battery.

Everything else is sold.

Thanks for reading, and if you want more pictures just PM me and I will text them to you.  Any questions, text me.

602-541-0860


4
Airsoft Items FOR SALE / Re: G&G combat machine project gun
« on: October 02, 2011, 05:07:29 PM »
Bump.

5
Airsoft Items WANTED / Re: want broken aegs
« on: October 02, 2011, 05:05:09 PM »
I have a g&g combat machine, gearbox should work, but I have no battery to check.  Missing a few external parts, and needs charging handle fixed.  Needs a hop/barrel too.  Mostly just small screws and stuff.  I would sell it to you for 50, or 40 if you could give me a small type battery.

6
Airsoft Items FOR SALE / G&G combat machine project gun
« on: September 23, 2011, 09:57:20 PM »
I have to offer a G&G combat machine, that needs a little bit of love.  I am not a profecient tech, and do not feel like dropping a bunch of money into paying someone to do two or three things. It does not come with any barrel or hop up, the charging handle spring is messed up, it needs a new magazine release screw, and I do not have a battery to run it.  With a little attention, this will be a great gun.  Looking for $65 dollars, comes with everything including 2 midcap magazines.  MUST MEET ME, preferred location is the safeway at 48th street and indian school, but anywhere nearby there is fine. 

I will include a shorted out 10.8v battery, I'm sure that anyone with electrical experience can fix it up.
(Wired to deans by the way)

7
General Airsoft Discussion / Re: "Bang-Bang!" Rule
« on: September 22, 2011, 11:03:11 PM »
Just do a 1 shot, no need to risk being shot, no need to full auto.

8
FUUUUUUU

I won't be in town.

9
AEG's / Re: KART M14 EBR- Upgrades, Opinions?
« on: April 14, 2011, 09:00:05 PM »
Also, the external barrel is weird and does not allow aftermarket barrels. You have to mod them to fit.

10
Accessories & Gear / Re: m120 spring
« on: April 03, 2011, 09:37:45 PM »
PM'd

11
Gas Powered Guns / Re: Airsoft GBB Semi/Full-Auto Shotguns
« on: March 31, 2011, 07:40:28 PM »
I heard that WE is making a GBB shotgun, apparantly it should come out within a year.

12
Site Suggestions / Re: Help for CQB
« on: March 31, 2011, 07:02:00 PM »
Try the Galaxy mp5k. Takes mp5 mags, but is super small so it is awesome for cqb.

13
Airsoft Items FOR SALE / Re: Thompson Gearbox
« on: March 30, 2011, 08:50:15 PM »
Quote from: "I Slap Fat Kids"
What brand is it?


I am his friend, and it is a CYMA.

14
Airsoft Items WANTED / NEED 3 THINGS IMMEDIATELY
« on: March 30, 2011, 08:48:26 PM »
Need the following by or on Saturday.  You must be able to meet me in the Arcadia area.

1.  m110-m120 spring
2.  Type version 2 gearbox, type 1 cylinder, or the one that the hole is at the very end of the cylinder.  For m16 length.
3.  An m4/m16 air nozzle.  I need this one the most as mine is broken.

15
Airsoft Items WANTED / NEED .25 GRAM BB'S BEFORE NEXT SATURDAY!!!
« on: March 26, 2011, 09:50:29 PM »
I really need some for a game I am going to, you must meet with me I can not drive anywhere.  Will pay for any amount, from 1000 to a full bag of 5000.  Cash, or I have a bipod grip that I would prefer to trade over cash.  I really need this.

Pages: [1] 2 3 ... 10