Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - QCA_Airsoft

Pages: [1] 2 3 ... 5
1
NEED TO SELL ASAP!!!! (BEFORE Saturday 10/1)

2
Airsoft Items FOR SALE / SALE: KJW P226
« on: September 08, 2011, 06:27:23 PM »
NEED TO SELL ASAP!!!!!

I have a Kjw Sig P226. It needs 2 parts to work. The parts are $15 dollars total. It needs a new firing pin(?) its $8 on evike. and it needs a mag feeder $7 dollars on evike. The everything else about the gun is great. Asking $40

SOLD! I have an Echo1 stag arms m4 with a vanguard spring in it. 2 hicap mags. 8.4v and 9.6v batterys. Wall charger. I still have the stock spring if you want it. I also have the origional boxing probably about 2k rounds throug it. It works great and has a pretty good rof. Asking $100

SOLD! Next is an infintiy tactical m4 tactical vest (black) can hold 8 mags. Asking $15

everything is obo
If you want specific pictures let me know and i can get them to you.
PM or 480-206-2538 call/text




3
Quote from: "QCA_Airsoft1"
If this was at Gearbox Airsoft i have that same gun, I just picked up a 2009 King Arms Troy M7A1 from Gearbox Airsoft For 200$
im pretty sure you bought his gun dude...

4
General Airsoft Discussion / Re: Testing my painting abilities
« on: May 19, 2011, 08:43:32 PM »
Quote from: "morugatu"
Personally for effectiveness I'd recommend using free-hand so the colors all create a 'gradient' and you don't have solid colors that don't 'blend'.

The best hands down paint to use is that textured sand paint as it is already the color you want. I usually use tan, khaki, brown, and top it off with the sand texture paint. Avoid using green, black, or a lot of brown unless the field you play at is very green. Also stick with flat if possible although you may have to go with matte in some cases which is ok for airsoft.

I would recommend avoiding Krylon as I've found their paint chips easily and the nozzles clog fast. I know most people swear by them, but I've just had better luck with Rustoleum or however they spell it. Make sure you sand, wash, and prime before painting or it'll chip straight off. Also doesn't hurt to go with a clear overcoat although I question how effective the overcoat paints are. Oh, and metal likes to suck up paint but plastic tends to reject it, so do the plastic a lot more slowly or it'll 'run' and create ugly clumps of paint.

Anyway, that's the way I paint. Sorry for rambling. ;)

Thanks for the tip!

5
General Airsoft Discussion / Re: Testing my painting abilities
« on: May 15, 2011, 07:51:46 AM »
Quote from: "XavierMace"
I would suggest using colors that actually blend in with something, but that's just me.
Yeah, i was thinking that too. I dont have those colors at the moment though.

Quote from: "irishmaster"
i suggest you paint them really bright colors, then you can comply with calif. early :lol:
Hahaha that might be a good idea, getting ahead of the game!! But im not going to do that unless i have too.

6
General Airsoft Discussion / Testing my painting abilities
« on: May 14, 2011, 12:22:53 PM »
So, im getting tired of my same old boring black M4 and am deciding if i shoud/have skill enough to paint it. I would i only paint the the handguard, LE stock, and magazine(s). These are just some of the colors i thought might look cool, still deciding on colors though. Let me  know if you have any suggestions and what you think!!

             

7
Gas Powered Guns / Re: KJW P226
« on: April 24, 2011, 11:39:13 AM »
I took out the hammer assembly and the firing pin was broken. Any ideas as to where i could get a new one??? I cant Find them in stock anywhere.

8
Gas Powered Guns / KJW P226
« on: April 22, 2011, 01:43:00 PM »
So i got this gun about a month ago and go to shoot it for the first time today... I knew the mag leaked so when i put the propane into it it statted leaking all over. So I filled it as fast as i could and put it into the gun and got two shots off. I the went and took the magazine apart and fiddled around with it. I put silicone oil on and it back together. I put propane in and it didnt leak!!! But now it wont shoot. I put everything back the right way... It seems the firing pin that is supposed to strike the output valve either isnt stong enough anymore or its not striking it at all. Any ideas????

9
Airsoft Items FOR SALE / Re: Two Echo1 Stag-15 M4/JG M4 S-System
« on: April 22, 2011, 10:28:21 AM »
Bump

10
Airsoft Items FOR SALE / Re: Two Echo1 Stag-15 M4/8gb Ipod touch
« on: April 02, 2011, 11:59:10 AM »
UPDATE: G18 SOLD!! Price Drop on Stag M4's.

11
UPDATE: Price Drop on first Stag M4 and ipod.

12
Airsoft Items FOR SALE / Echo1 Stag-15 M4/JG M4 S-System
« on: March 26, 2011, 06:18:30 PM »
Echo1 Stag-15 M4
This is a great gun that was purchased at vanguard last summer. It is also being sold to purchase another gun. It works great!!! It has an s80+ spring(310-330) in it to play at vanguard. The stock spring will also be included (350- 380 FPS). $150 OBO No trades or part out
Package:
Echo1 Stag-15 M4
Carrying handle
1 King Arms 120rd mid-cap
9.6v battery
8.4v battery
Stock Spring
2pt sling
Can include original box
*Carrying handle found and will be included

It also has a a little RIS on the front of the hand guard a flashlight, laser, or vertical grip (not very comfortable) can be attached.

Package:

I Have a JG M4 S System that was purchased last summer and is in Mint condition. I have upgraded the Internals by a Matrix aluminum piston and piston head. I have put new wiring in so it has a new strong connetion from the gearbox to the battery. I have a Matrix Hi Torque motor to pull back heavy duty springs. It has a S80 Spring installed for Vanguard cqb but will come with a M120 spring (400 to 420). Will come with a 8.4v 1100 mah battery and a Tenergy 8.4v 1600mah Battery. Will come with charger and G&P Laser edged verticle grip(Very Comfortable) And 1 Tokyo Marui 350rd Hicap Magazine. Performs flawlessly and is ready for long term use. I have put probably 300$ into this Gun and it was worth every penny. This gun has no functionality or machanical problems whatsoever. I AM ASKING 170 OBO SOME TRADES ACCEPTED This gun does not come with the red dot sight but can be purchased for 50$





PM with questions or text to
480-206-2538 : for Echo1

PM with questions or text to
480-421-8694 : for JG M4 S-System

13
AEG's / Re: Ares spring change
« on: March 23, 2011, 02:45:45 PM »
Thanks!

14
General Airsoft Discussion / Re: vanguard repair prices?
« on: March 23, 2011, 11:14:04 AM »
I think when i had my spring changed the charged me like 20-25 or something, the price if you purchased the gun at vanguard. My buddy did not purchase his gun there and was charged like 35 i think.

15
AEG's / Ares spring change
« on: March 23, 2011, 11:10:30 AM »
Is Ares the only maker that has the "qiuck spring change" feature??? Or are there others???

http://www.youtube.com/watch?v=nqhrJmiCtxM

Pages: [1] 2 3 ... 5