This is my review of the G&G Combat Machine M4 (Non-BlowBack Version)
http://www.airsoftgi.com/product_info.p ... ts_id=4587---------------------------------------------------------
I got this AEG through a trade of my G36c (JG)
Upon arriving home and taking afew test shots, It handled alright with Medium to Short decent accuracy, It felt lacking in the range department and wouldn't reach out and touch targets like I felt it should, But i'll post my solution to that down below.
My Pro's and Con's of this AEG
Pro's:
Lightweight
Sturdy Construction (Although mine came with a wobbly stock, most likely neglect by previous owner and bad care (was a young kid))
Good Internals (I hear the stock motor can take a harder spring, and the accuracy with the stock barrel is reasonable)
Fire Selector is very Firm and Clicks loudly into place, I like this as my G36 had a Fire selector i would just tap, and it would go into either safe or Full auto, etc.
Quick and Easy Dis-assembly
Cheap!
Con's:
No longer carries the USMC trades! :<
Front Sight Post is part of the outer barrel
Low Stock FPS (300 w/ .25's I've seen on YouTube)
Hop-Up Adjustment is very stiff!
Charging Handle does NOT pull back the Dust Cover to expose the hop-up, use your finger-nails boy!
Flash Hider is Jesus Glued on.
What i've done to make this Rifle more field worthy (So Far, to be updated as I go along)
Newest Version Madbull Tight Bore Barrel (6.03mm, 455mm, AK Length)
http://www.airsoftpost.com/product_info.php?products_id=24374 -Thanks to ChrisLuty for this recommendation!-
My TBB was a nice new sexy Black barrel fresh off the line it looked, so I eagerly ripped open my M4 to toss this in, after fiddling with the hopup and figuring out I had the barrel in upside down (But theres no sides on a circle! Duh... Look up "How a Hop-up Works");
it preformed like a charm! Easily adding on the needed range and accuracy to just reach out and hit those pesky out of reach runners! (If your reading this SilentDragon, This means you!... Runner...
)
The stock inner barrel length on this AEG is 363mm or so, So adding about 100mm to the length of the inner barrel is obviously going to make it stick from the flash hider, I had to melt my flash hider off anyway!
I Covered up the added length with the Matrix "Special Force" Mock Suppressor/Barrel Extension in Black
http://www.airsoftpost.com/product_info ... s_id=30333Dont be fooled by the picture! It is a nice deep black and matches the M4 well in my opinion.
I absolutely love it to be honest, it definitely feels solid and has some nice weight to it and screws on snug!
It covered up the added length of the TBB Nicely without any rattling!
Upgrades to be added:
M120 Spring
Guarder O-Ring Air Nozzle
Systema ENERGY Motor
