g36 full auto not functioning.

[headhunter]

  I have a JG G36c that is bone stock, never opened. I am not sure what is wrong but after checking other forums and Googling for a little, I could not find anybody with a problem similar to mine.
 
 When firing on semi auto the gearbox will function normally provided it is a crisp, fast trigger pull. If I slowly pull the trigger back. It will fire a burst of two to ten or so rounds. When I switch the selector from semi to full, it will function just as if it was on semi auto still.

  My question is, how could I fix it on my own as cheap as possible. I don't want to take it to a tech since it is an extra and I want to practice fixing air soft guns so I can do it in the future.

Thanks,
HH

[Tiedyeftw]

replace the wiring and trigger assembly.

[spazz]

i dont think it is the whole trigger assembly. the culprit here is likely to be the cutoff lever.
the v3 gb in the g36 is a great gb to start learning to do tech work on. minus the trigger anyways,
most people hate the trigger in the v3gb.

[Pride]

Just as spazz said, it may be the cut off lever, but I think the bursts on the slow pull might be the shuttle being too long or the metal that completes the circuit might be loose.