kwa mp7a1 reciever body pins help!

[bailey5671]

one of my body pins on my KWA mp7 is stuck and no matter how much force i use it simply wont come out. help!

[icorus16666]

push the pin out the correct way,with a bigger hammer, with all the might that the little engine that could and smack away. I can't remember if they are self retained though so be careful. Another thing you can try is to turn the pin with a pair of pliers to loosten it up, but if they are self retained i wouldn't suggest doing this.

[Dayton]

push the pin out the correct way,with a bigger hammer, with all the might that the little engine that could and smack away. I can't remember if they are self retained though so be careful. Another thing you can try is to turn the pin with a pair of pliers to loosten it up, but if they are self retained i would suggest doing this.

They are self retaining, Do NOT turn the pins. You will jam them and break the retaining spring/wire.

Are you just talking about the 2 pins at the rear of the gun? Or are you talking about one of the pins in the middle of the gun that prevent the barrel assembly from coming out?

For the 2 large pins at the rear: Get a punch that will fit inside the smaller end of the pin, and using a hammer, gently tap them out.

[bailey5671]

im talking about the 2 body pin in the rear to open up for internal maintenance, and im going to get it taken care of hopefully this weekend

[icorus16666]

push the pin out the correct way,with a bigger hammer, with all the might that the little engine that could and smack away. I can't remember if they are self retained though so be careful. Another thing you can try is to turn the pin with a pair of pliers to loosten it up, but if they are self retained i would suggest doing this.

They are self retaining, Do NOT turn the pins. You will jam them and break the retaining spring/wire.

Are you just talking about the 2 pins at the rear of the gun? Or are you talking about one of the pins in the middle of the gun that prevent the barrel assembly from coming out?

For the 2 large pins at the rear: Get a punch that will fit inside the smaller end of the pin, and using a hammer, gently tap them out.

Why can't you just let me have my fun with a kid trying to do some ultra custom work. Yeah and i noticed in my post i originally had it saying to turn the pins.Fixed it. Yeah anyways those pins should almost drop out.