Airsoft Arizona
Airsoft Hardware => Troubleshooting => Topic started by: rictas777 on September 23, 2013, 12:04:18 PM
-
For some reason, when my mag is loaded in the gun and i pull the trigger, one trigger pull empties out all the gas and gives no blowback, any reason why that might be?
-
Sticky valve??
-
It could be the hammer is catching on another part internally and not cycling all the way back. The same thing happened to a friend's WE SCAR-L, it had something to do with the "firing pin" or whatever contacts with the gas release.
-
Along with the sticky firing pin hammer problem it could have no compression in the cylinder.
-
i dont get it either, i put the gun back together multpile times back and forth, i watched youtube videos from the start to end and i still dont get why
-
And everything cycles properly? Is the can of gas you are using almost empty?
-
i actually figured out whats wrong with it, i need to replace my hammer piece, which they sell very limited in the whole globe, anyone got a metal shop to recommend me to?
-
Should add the valve knocker to the list of parts to have CNC'd?
-
CNC'd?