So im thinking about selling my g&p woc. Depending on the offers i may just keep it but m4's are boring to me now. So starting off with what's included; the WOC, a g&p pmag, and some extra parts are what you're getting. Externally my WOC has a g&p magpul lower receiver and a vltor MUR upper. On the receiver i have put a g&p steel selector (non ambi) and g&p ambi mag release. The stock is a g&p vltor style one (emod i think) and the stock tube is a 5ku vltor engraved one with a qd sling plate with mount. The grip is a magpul miad and the rail is 7 inch DD lite rail. I've put a vltor front sight and troy rear sight on it and the barrel is a 14.5 g&p steel barrel. Last thing is the front pivot receiver pin is a ra-tech magic pin so there is no receiver wobble at all.
Now for the internals! This has the standard g&p firing block, g&p steel firing pin, g&p steel bolt catch, g&p steel trigger, g&p steel trigger sear, g&p steel hammer, g&p steel buffer lock, g&p metal hop up set and inner barrel, g&p standard charging handle, and g&p aluminum buffer. The bolt carrier is a 5ku aluminum vltor and the bolt (nozzle) is a SA nylon fiber one. I will include a 5ku metal nozzle and locking plate as well. Some extra springs and parts will be included as well. Im asking
$350 plus shipping. Price lowered because while i was running a drill with this guy the new plastic nozzle cracked at the tip so now im down to using the metal nozzle. The metal nozzle does not produce a seal near as well as the plastic one so the oring needs to be replaced with a thicker one to get better gas efficiency ATM it sucks. oring size is either a 2.4mm or 2.5mm with a 12 or 12.5mm inner diameter. Cash is king here. Feast your eyes on my m4 now. Ive also posted this on gasguns.info so i can cover my bases.
