« previous next »
Pages: 1 [2] 3

Author Topic: WE Hi Capa  (Read 4063 times)

Offline War savage

  • Trade Count: (0)
  • Sergeant Major
  • *****
  • Posts: 545
    • View Profile
(No subject)
« Reply #15 on: July 26, 2005, 08:46:59 PM »
Quote from: "andyhinds"
Quote from: "Gantaliano Hoff"
Seeing as how we've started a thread for this gun (as useless as it may have been, hee hee), how's it shoot?

Shoots great, doesn't like green gas at all.  Bolger has had one for a while so he can probably give you a better review than I can.


I bought one about 2 months ago. Love it!! The reason you're seeing the puff of gas come out when you shoot is there's an o-ring that's getting blown out of its groove when you use Green gas. Mine did the same thing. It shot fine after about 5-6 magazines. Then on a warm day it just blew the o-ring out of place. I brought it in to Dusty at JT. He took it apart and showed me were to place a very small dab of super glue to hold it in place. Just make sure you clean of the area and o-ring very well before you glue it, then relube after glue dries. I've not had a problem since.

If you call me I can walk you through it.
« Last Edit: December 31, 1969, 05:00:00 PM by War savage »
Logged

Offline andyhinds

  • Trade Count: (0)
  • Major General
  • *****
  • Posts: 2134
    • View Profile
(No subject)
« Reply #16 on: July 26, 2005, 08:59:02 PM »
Quote from: "War savage"
Quote from: "andyhinds"
Quote from: "Gantaliano Hoff"
Seeing as how we've started a thread for this gun (as useless as it may have been, hee hee), how's it shoot?

Shoots great, doesn't like green gas at all.  Bolger has had one for a while so he can probably give you a better review than I can.

I bought one about 2 months ago. Love it!! The reason you're seeing the puff of gas come out when you shoot is there's an o-ring that's getting blown out of its groove when you use Green gas. Mine did the same thing. It shot fine after about 5-6 magazines. Then on a warm day it just blew the o-ring out of place. I brought it in to Dusty at JT. He took it apart and showed me were to place a very small dab of super glue to hold it in place. Just make sure you clean of the area and o-ring very well before you glue it, then relube after glue dries. I've not had a problem since.

If you call me I can walk you through it.


I lubed the heck out of the o-ring.  Hmm super glue, I may have to have you or Bolger show me how.
« Last Edit: December 31, 1969, 05:00:00 PM by andyhinds »
Logged

Offline Bullseye

  • Trade Count: (0)
  • Sergeant First Class
  • *****
  • Posts: 315
    • View Profile
(No subject)
« Reply #17 on: July 27, 2005, 10:29:11 AM »
I bought one and also made the mistake of using Greengas... <sigh>  :roll:

Thx for the fix!
« Last Edit: December 31, 1969, 05:00:00 PM by Bullseye »
Logged
Field Cmdr, Fatal Exception

He who dies with the most toys...
... is still dead. http://www.tucsoncoalition.com http://www.teamfe0.com

Offline andyhinds

  • Trade Count: (0)
  • Major General
  • *****
  • Posts: 2134
    • View Profile
(No subject)
« Reply #18 on: July 27, 2005, 10:42:29 AM »
Quote from: "Bullseye"
I bought one and also made the mistake of using Greengas... <sigh>  :roll:

Thx for the fix!


So once I switch to Red or Propane, all the problems should go away?  Or do I still need to superglue?
« Last Edit: July 27, 2005, 10:57:55 AM by andyhinds »
Logged

Offline Mooncruiser

  • Trade Count: (+7)
  • Major General
  • *****
  • Posts: 2241
    • View Profile
(No subject)
« Reply #19 on: July 27, 2005, 10:48:55 AM »
Apparently, the gas slowly leaked out for that week and dried out the O ring...
Chip

Quote from: "azsarge"
Quote from: "Mooncruiser"
Mine works well on Coleman (US) propane. However, due to my leaving the mag charged for over a week, the seal dried and needed to be lubed.

Care to elaborate?

I leave gas in all of my mags.  About 1/2 full.  I went away for 9 months and they were all fine when I got back, because I left them partially filled.  The 2 mags that I left empty would not hold a charge and had to have the O-rings replaced.

I have KJW M9 mags BTW, but the theory is still the same.
« Last Edit: December 31, 1969, 05:00:00 PM by Mooncruiser »
Logged
~~ All men should know before they die, what they are running to, and from, and why ~~

AIRSOFT ADDICTS
Saguaro Airsoft Team

Offline War savage

  • Trade Count: (0)
  • Sergeant Major
  • *****
  • Posts: 545
    • View Profile
(No subject)
« Reply #20 on: July 27, 2005, 11:23:01 AM »
Quote from: "andyhinds"
Quote from: "Bullseye"
I bought one and also made the mistake of using Greengas... <sigh>  :roll:

Thx for the fix!

So once I switch to Red or Propane, all the problems should go away?  Or do I still need to superglue?


No, it will defintely happen with Red Gas. Yes, you'll still need to glue it down. The o-ring will not stay in place. I thought the same thing (if I lube the heck out of it, it shouldn't be a problem).
« Last Edit: December 31, 1969, 05:00:00 PM by War savage »
Logged

Offline andyhinds

  • Trade Count: (0)
  • Major General
  • *****
  • Posts: 2134
    • View Profile
(No subject)
« Reply #21 on: July 30, 2005, 04:04:30 PM »
I checked, and my O-ring isn't budging, I think the green isn't strong enough to work the slide.  But that leads me to another question..

A lot of people are using Propane with the WE with no problems, but have problems with Green Gas.  Everybody tells me that green gas IS propane, so why isn't the green gas working, but propane does.....?
« Last Edit: December 31, 1969, 05:00:00 PM by andyhinds »
Logged

Offline Mooncruiser

  • Trade Count: (+7)
  • Major General
  • *****
  • Posts: 2241
    • View Profile
(No subject)
« Reply #22 on: July 30, 2005, 05:40:30 PM »
From what I've seen, the pressure of the propane in the Green Gas can isn't enough to get a full magazine thru the gun.

Chip
« Last Edit: December 31, 1969, 05:00:00 PM by Mooncruiser »
Logged
~~ All men should know before they die, what they are running to, and from, and why ~~

AIRSOFT ADDICTS
Saguaro Airsoft Team

Offline andyhinds

  • Trade Count: (0)
  • Major General
  • *****
  • Posts: 2134
    • View Profile
(No subject)
« Reply #23 on: July 30, 2005, 05:57:08 PM »
Quote from: "Mooncruiser"
From what I've seen, the pressure of the propane in the Green Gas can isn't enough to get a full magazine thru the gun.

Chip



So where have you been buying your red gas at?
« Last Edit: December 31, 1969, 05:00:00 PM by andyhinds »
Logged

Offline SINJIN

  • Trade Count: (0)
  • Sergeant Major
  • *****
  • Posts: 596
    • View Profile
    • http://www.coyotetactical.com/gallery
(No subject)
« Reply #24 on: July 31, 2005, 12:11:24 PM »
Just in case anyone else is interested in this pistol, here is package deal I found at Jungle Toy..

http://www.airsoft128.com/xcart/catalog ... 33926.html
« Last Edit: December 31, 1969, 05:00:00 PM by SINJIN »
Logged

Offline Surplus man

  • Trade Count: (0)
  • First Sergeant
  • *****
  • Posts: 454
    • View Profile
(No subject)
« Reply #25 on: August 01, 2005, 12:03:38 AM »
green gas is weaker propane with lube added. straight propane will power your gun, m79 cooked me up a fulled bottle of straight propane and it runs beautifully through my guns.
« Last Edit: December 31, 1969, 05:00:00 PM by Surplus man »
Logged
I saw this plug was in my wall here and then i noticed that your house was glowin like THE FRICKIN SUN! So, i uh put 2 and 2 together here and decided that your pissin me off...

-carl

Offline AddoAduro

  • Trade Count: (0)
  • Master Sergeant
  • *****
  • Posts: 353
    • View Profile
(No subject)
« Reply #26 on: August 01, 2005, 12:36:29 PM »
Wait, I'm not supposed to be using green gas in it? Crap... Now you tell me! :/

I was wondering about that little puff I saw... Might explain the other little problems too. ;)
« Last Edit: December 31, 1969, 05:00:00 PM by AddoAduro »
Logged
Quote from: \"XavierMace\"
Every day I have to wade through mountains of stupid posts on forums by kids who feel it necessary to share their personal life on the internet like they think we care.

Offline Bullseye

  • Trade Count: (0)
  • Sergeant First Class
  • *****
  • Posts: 315
    • View Profile
(No subject)
« Reply #27 on: August 01, 2005, 03:01:32 PM »
Thx for the tip on gluing down the o-ring. Mine had popped loose from the piston head and lodged at the rear of the piston guide. After pulling the entire slide assenbly apart, unleasing a couple dozen swear words, and removing the o-ring, I managed to tack down the ring back into place - Voila! gun works again.
« Last Edit: December 31, 1969, 05:00:00 PM by Bullseye »
Logged
Field Cmdr, Fatal Exception

He who dies with the most toys...
... is still dead. http://www.tucsoncoalition.com http://www.teamfe0.com

Offline andyhinds

  • Trade Count: (0)
  • Major General
  • *****
  • Posts: 2134
    • View Profile
(No subject)
« Reply #28 on: August 03, 2005, 05:06:11 PM »
My Red Gas arrived today, WE works PERFECT with it.  Damn stinking Green Gas.....
« Last Edit: December 31, 1969, 05:00:00 PM by andyhinds »
Logged

Offline Mugen

  • Trade Count: (0)
  • Sergeant First Class
  • *****
  • Posts: 310
    • View Profile
(No subject)
« Reply #29 on: August 03, 2005, 07:28:15 PM »
I BOUGHT MY HI CAPA TODAY!!!!!

(I just thought I would share that with you guys!)
« Last Edit: December 31, 1969, 05:00:00 PM by Mugen »
Logged
It was once believed that Chuck Norris actually lost a fight to a
pirate, but that is a lie, created by Chuck Norris himself to lure more pirates to him. Pirates never were very smart.
Pages: 1 [2] 3
« previous next »