Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - babybackribs

Pages: [1] 2 3 ... 47
1
Airsoft Items FOR SALE / Re: Getting out of Airsoft
« on: August 10, 2009, 08:20:40 PM »
Yea, sorry.  I've been really busy.  As previously stated, the CQB is custom.  PM replied to.

2
AEG's / Re: Weapon Photos Discussion
« on: July 20, 2009, 08:41:32 PM »
Vince - Is it shooting hot with the stock cylinder?

3
AEG's / Re: m249 battery
« on: July 17, 2009, 09:51:08 PM »
M249 gearboxes are finicky.  Since they are large pieces, the cast metal cools differently, and it can warp the metal a bit.  It all depends on what gearbox you get.  I have an CA M249 gearbox in my M2, and I've run it on a 14.4v battery for an entire ammo tray without a problem, and I've never used lower than an 11.1v lipo.  Some people get good ones, some get bad ones.

4
Airsoft Items FOR SALE / Re: Getting out of Airsoft
« on: July 17, 2009, 09:36:04 PM »
CIRAS sold.

5
Airsoft Items FOR SALE / Re: Getting out of Airsoft
« on: July 15, 2009, 11:53:31 PM »
Shrike sold.

6
Airsoft Items FOR SALE / Re: Getting out of Airsoft
« on: July 14, 2009, 11:28:28 AM »
Shrike SPF.

7
Airsoft Items FOR SALE / Re: Getting out of Airsoft
« on: July 11, 2009, 03:41:58 PM »
Prices are flexible.  Make me an offer!

8
Airsoft Items FOR SALE / Re: Getting out of Airsoft
« on: July 06, 2009, 06:43:39 PM »
Alright. Let me know.

9
Airsoft Items FOR SALE / Re: Getting out of Airsoft
« on: July 02, 2009, 10:18:58 PM »
More stuff added.

10
Airsoft Items FOR SALE / Re: Getting out of Airsoft
« on: July 01, 2009, 06:26:04 PM »
Price update.

11
Real Firearms / Re: Pilz RS starting up
« on: June 28, 2009, 05:30:53 PM »
Well Pilz, you posted on my account, but my guns aren't here. I guess they should be:


Not pictured:
KNS anti-rotation pins
YMG ambi-selector






12
Pilz what the hell are you doing on my account?

13
Airsoft Items FOR SALE / Getting out of Airsoft
« on: June 28, 2009, 02:14:56 PM »
I finally decided to sell off most of my airsoft guns.  Prices are somewhat flexible.  I've gotten into RS shooting now.  Not parting anything out now.  ABSOLUTELY NO TRADES.
Pics up.

CA SR-25 URX - $500



External

-CA SR-25 silencer
-King Arms scope mount
-Action M3 3.5-10x40 scope w/ 90mm sunshade
-G&P SPR grip
-MagPul PRS stock
--King Arms Li-po in stock tube
-CA large charging handle
-G&P SPR trigger guard

Internal

-G&P cylinder head
-G&P piston head
-G&P 7mm bearings on Bevel and Spur gears
-SP130 spring
-Prometheus Perfect NEO hop up chamber
-MadBull 617mm V.2 tightbore
-Prometheus soft bucking
-Laylax strike chamber
-MadBull shark nub

Comes with KA 1200mah lipo for the stock tube, 3 CA midcaps w/ Magpuls, 1 standard hicap, original box (even though it won't fit), an extra G&P piston, and the URX tool.  Never used this in battle, and less than 100 rounds through it. Has minor wear on the reciever from taking it apart. I also broke one of the tabs from when I changed out the trigger guard. Fixed it with epoxy putty.

M4 CQB - $400



Internal

-6MilSpec Gear Box with 7mm Bearing Bushings (CNC'd of MilSpec aluminum)
-F2, Level 4-5, 7mm Bearing Bushings (able to spin at over 70,000 RPM)
-Prometheus Hi-speed gears
-Prometheus POM piston head
-Prometheus gold motor leads
-Laylax strike chamber
-Madbull shark nub
-Cut-down Madbull V.2 tightbore
-G&P M120 motor
-G&P polished cylinder
-G&P spring guide
-G&P cylinder head
-G&P nozzle
-Madbull M110
-Madbull piston
-G&P switch assembly
-Deans 16 AWG 660-strand wiring

External

-G&P HK416 stock
-G&P/Airsoft Surgeon Marine lower
-DYTac VLTOR MUR upper
-STAR Hogue grip
-Classic Army CQB barrel
-CA sling mount
-King Arms RIS
-King Arms TD grip
-King Arms PRI front sight
-Action #40 rear sight
-G&P SR16 flash hider

Don't know what to say about this gun.  I got bored one day and put it together from the spare parts I had lying around.  As with the SR25, I broke one of the tabs when I replaced the trigger guard.  Used epoxy putty to put it back on.  The MUR is one of the first 100 that DYTac made.  MTHaynes gearbox is no longer made and the shell alone is $250.  Airsoft Surgeon body is pretty unique too, although it is missing the right side selector cover thing.

UN Custom TM Glock 17 (Tan body) - $220



UN Custom-Marui G17 Metal Version w/14mm-
-Marui G17 Based
-Guarder Steel Outer Barrel with 14mm Anti-Clockwise Thread Installed
-Guarder Original Frame for Marui G17 (Olive Drab) Installed
-Guarder Aluminum Slide for Marui Glock 17 Installed
-Guarder Steel Recoil Spring Guide and Hammer Set Installed
-Hi-Flow Valve Installed
-Custom recoil spring

Comes with PFI Smokecap and G&G mini suppressor, 1 mag and original box.  I got UN to put the tan body on instead of the OD body.  I'm fairly certain that this is the only one they made with the tan body.  Never seen battle and only fired about 200 rounds through it.  New recoil spring now makes it short stroke, so it can shoot faster.  Slide does not lock back on the last shot.

Airsharp M2HB - $400





I got this as the kit that you put together and has no gearbox.  I then got a CA M249 gearbox, put my Kanzen ceramic bearings in, and whatever spare parts fit in it.  I know it has G&P gears, KN cylinder, G&P cylinder head, Element piston, PDI 170%, Madbull 590mm barrel, and other parts.  I made the crappy tripod out of 2" ABS tubing.  Ammo can is attached to the tripod and the  feed mech is made from an Inokatsu M60 feed tray.  It winds only when the gun is fired.  Gun has a master power switch and green "On" light.  It shoots about 30rps and is actually very accurate and has good range.  Comes with the gun, tripod, feed tray, and a Thunder Power 4200mah Li-poly battery. Barcode stickers are all gone.  Gun and tripod are not painted.

G&P M203 RIS Medium - $80

This was a long version, but I cut the barrel about halfway between the lengths of the short and long version.  This has never been used in battle.  It is also missing the trigger guard because it broke.


Wiley X SG-1 glasses - $70

Never even put these on.  Bought them when I lost my old ones, but then I bought my Flakjaks the next day.  Comes with everything in this picture (except mine have smoke lenses instead of the green tint).  I'll get my own up when I have the chance.



JT full face mask - $40

Never even worn this.  Bought it a while ago in case I ever went to a game requiring them.  Haven't airsofted since then.


More coming later (spare parts, mags, batteries, etc).

14
Real Firearms / Does anyone have an ar-15 they want to get rid of?
« on: May 28, 2009, 11:36:32 PM »
I'm looking to get an ar-15 preferably with a flat top reciever, and collapsable stock, but I'm not too picky. I would prefer to trade my upgraded remignton 870 for it.

Heres the run down on it:
Remington 870 12g tactical (ghost rings, drilled and tapped reciever with a rail, breacher on it 18in barrel.)
Knoxx stock collapsable
Knoxx forearm
ATI pistol grip forearm
TacStar heatsheild
TacStar side saddle 6 rounds
Plastic gun case
8-9 rounds of Berneke home defense slugs
Spare Remington extractor spring
Boresnake

Pictures:

Basic set up:


Other set up:

15
Real Firearms / Re: FS 1911 parts
« on: May 25, 2009, 12:28:55 AM »
STI grips/ screws SOLD
Guide rod no longer available
Sear spring no longer available

Hogue Govt. length grips $15
All other parts for best offer

Knoxx 870 forearm very sturdy, and larger than stock. $25



WTB .45ACP Hydra Shocks

Pages: [1] 2 3 ... 47