Good whatever-time-it's-supposed-to-be AA! I'd like to see what the interest level is on my home-made Vortex block bb machine gun. Its nothing too fancy as it is made out of PVC pipe, but the stats on the gun are as follows:
85-110 bb's per second, at about 300-350 fps with .20 gram bbs. There is a standard 650mm inner barrel, no hop up, and is fed from a large hopper on the top of the gun(built into the stock).
The gun runs off of compressed air and has a male 1/4 inch npt quick disconnect fitting at the end of it, so most shop air compressors would work for powering this. I will be uploading a picture later tonight as well. Again Im just wanting to see if anyone is interested in this gun. Just for comparison, a standard M4 is a couple inches longer than this gun. Also for reference, Polarstar air rigs use 1/8 inch quick disconnect fittings.
If you have any questions or comments feel free to PM me or post up here as long as it is relevant.
Thank you for your time!
