Airsoft Arizona
General Airsoft Arizona => Reviews => Topic started by: Skeleton on December 27, 2008, 02:24:59 AM
-
Well it's a C11? I got if from walmart. I got board so I was looking at there gun's and the FPS.I noticed that this one was the only gas gun and it had 400 FPS so I got it.
Well it's plastic which didn't surprise me at all but I was looking at it in the car and I noticed that it was on fire? which I wasn't happy about but I'm a safety freak!
The mag will hold up to 15 BB's over all I like it but there are some problems.
The gas goes in the grip/handle but you have to pull the grip sideways to get it in and its vary flimsy.
That's about it so far I hear that it is strong but well see.
I love how it shoot's, it's so fun. But Ive only shot it in my garage because I got it today so it scares the shit out of me when the BB's fly past me lol. Its about 400FPS maybe higher from my chrono test. But I'll have to do that again tomorrow too it shoot's as fast as you can pull the trigger so that's always good I guess. Its almost dead accurate I got like less than a centimeter from what I was aiming for!
So I'd give it a 7/10 it is probably going to be the best walmart gun you will ever buy I almost shit myself when I saw this
I love it lol.
well that's my review
I dicided to post some pics but I'm using a phone camera so sorry if there crappy
(http://i169.photobucket.com/albums/u236/skeleton25/1227080155a.jpg)
the mag
(http://i169.photobucket.com/albums/u236/skeleton25/1227080156c.jpg)
(http://i169.photobucket.com/albums/u236/skeleton25/1227080156c.jpg)
the flimsy CO2 department
(http://i169.photobucket.com/albums/u236/skeleton25/1227080156a.jpg)
-
Well I was working on my bike got stressed so I went to unload on a can lol and it broke I think it might just be jammed... but cant unjam it
-
Lasted less than a day? Take it back, buy something better.
-
Lasted less than a day? Take it back, buy something better.
No it was just because it was just jammed I just unjammed it and I spayed it w/ wd-40 it works fine
-
Lasted less than a day? Take it back, buy something better.
No it was just because it was just jammed I just unjammed it and I spayed it w/ wd-40 it works fine
WD40 is the DEVIL.... [-X
-
WD40 will kill the internals on gas pistols, because it will degrade the rubber seals. For future reference, only use 100% silicone to clean and lubricate airsoft guns, and be sure to avoid anything with petroleum in it.
-
sorry I'm new to gas guns
-
sorry I'm new to gas guns
That goes for ANY airsoft gun, AEG, GBB, Springers, etc. Pretty much for all rubber and plastic components. Petroleum Distillates are BAD for those materials.
Besides, stay away from the Crossman "airsoft" guns. They're poor quality. If it's available at the same store,go for the SoftAir (rebranded KWC) Taurus 24/7 CO2 Pistol.
(http://www.shortyusa.com/cart/images/1497.jpg)
I've put about 20,000 rounds through mine in the past 6 months and it continues to work flawlessly. I bought it for $50 from Academy Sporting Goods in Austin.
Available on Amazon: http://www.amazon.com/Firepower%C2%AE-T ... B000YIH90C (http://www.amazon.com/Firepower%C2%AE-Taurus-fixed-Airsoft-Pistol/dp/B000YIH90C)
Spare Mags: http://www.pyramidairsoft.com/ProductDe ... uctID=1438 (http://www.pyramidairsoft.com/ProductDetails.aspx?ProductID=1438)
Each CO2 cartridge will yield about 250 shots, that's 15 to 17 magazine fills. Ads quote 380fps, but that's probably with cheap .12s. With good quality .20s it consistently shoots 290fps. Just right for CQB and plinking in the backyard.
-
sorry I'm new to gas guns
That goes for ANY airsoft gun, AEG, GBB, Springers, etc. Pretty much for all rubber and plastic components. Petroleum Distillates are BAD for those materials.
Besides, stay away from the Crossman "airsoft" guns. They're poor quality. If it's available at the same store,go for the SoftAir (rebranded KWC) Taurus 24/7 CO2 Pistol.
(http://www.shortyusa.com/cart/images/1497.jpg)
I've put about 20,000 rounds through mine in the past 6 months and it continues to work flawlessly. I bought it for $50 from Academy Sporting Goods in Austin.
Available on Amazon: http://www.amazon.com/Firepower%C2%AE-T ... B000YIH90C (http://www.amazon.com/Firepower%C2%AE-Taurus-fixed-Airsoft-Pistol/dp/B000YIH90C)
Spare Mags: http://www.pyramidairsoft.com/ProductDe ... uctID=1438 (http://www.pyramidairsoft.com/ProductDetails.aspx?ProductID=1438)
Each CO2 cartridge will yield about 250 shots, that's 15 to 17 magazine fills. Ads quote 380fps, but that's probably with cheap .12s. With good quality .20s it consistently shoots 290fps. Just right for CQB and plinking in the backyard.
lol I know crossman is cheap but some how this one isn't and I won't use anything less than 300 fps
-
lol I know crossman is cheap but some how this one isn't and I won't use anything less than 300 fps
Might want to change that thinking about 300fps.
320fps inside of 20 foot engagement range:
(http://c2.ac-images.myspacecdn.com/images02/30/l_e61aae90fb9c4df6ab287d0704624c29.jpg)
-
haha whoa that looks pretty bad .
-
And you wonder why I ask everyone about their overwhelming desire to have 400+fps AEG. My Marui MP5 shoots 270fps w/.20, just perfect for CQB and no field or group I've skirmished with has ever had a grievance about it. My Cyma MP5 shoots 340-350fps w/.20 and I can reach a decent range in the woods. My pistol shoots anywhere from 240-290fps w/.20 depending on gas and temp.
-
And you wonder why I ask everyone about their overwhelming desire to have 400+fps AEG. My Marui MP5 shoots 270fps w/.20, just perfect for CQB and no field or group I've skirmished with has ever had a grievance about it. My Cyma MP5 shoots 340-350fps w/.20 and I can reach a decent range in the woods. My pistol shoots anywhere from 240-290fps w/.20 depending on gas and temp.
Were did you get your MP5 because my CYMA MP5 only shoot's 300 and barely dose anything but than again it's a LPEG
-
To Skel- if you need any assistance in the area of gas gun maintainace, I am a gas pistol freak. I love them. I can help you with whatever you need. And, if you are looking for a gas pistol, a KWA sounds like it would suit your needs, I can't say definately, but to the extent of my knowledge, they are all over 300fps, and function flawlessly. A little pricey, but you will always get your moneys worth.
-
I had that gun, now it is the russian rulette gun ha ha it decides when it wants to shoot, it takes like three-god know how many trigger pulls to work! ha ha but what do you expect from wal-mart lol :|
-
I had that gun, now it is the russian rulette gun ha ha it decides when it wants to shoot, it takes like three-god know how many trigger pulls to work! ha ha but what do you expect from wal-mart lol :|
Holy god..... STOP THIS MADNESS! Don't res 2 month old threads for a one- line comment!!!! :o
(http://reasonstohateamerica.files.wordpress.com/2008/10/comon-sense.jpg)
-
lol my bad again ha ha!
-
sorry I'm new to gas guns
That goes for ANY airsoft gun, AEG, GBB, Springers, etc. Pretty much for all rubber and plastic components. Petroleum Distillates are BAD for those materials.
Besides, stay away from the Crossman "airsoft" guns. They're poor quality. If it's available at the same store,go for the SoftAir (rebranded KWC) Taurus 24/7 CO2 Pistol.
(http://www.shortyusa.com/cart/images/1497.jpg)
I've put about 20,000 rounds through mine in the past 6 months and it continues to work flawlessly. I bought it for $50 from Academy Sporting Goods in Austin.
Available on Amazon: http://www.amazon.com/Firepower%C2%AE-T ... B000YIH90C (http://www.amazon.com/Firepower%C2%AE-Taurus-fixed-Airsoft-Pistol/dp/B000YIH90C)
Spare Mags: http://www.pyramidairsoft.com/ProductDe ... uctID=1438 (http://www.pyramidairsoft.com/ProductDetails.aspx?ProductID=1438)
Each CO2 cartridge will yield about 250 shots, that's 15 to 17 magazine fills. Ads quote 380fps, but that's probably with cheap .12s. With good quality .20s it consistently shoots 290fps. Just right for CQB and plinking in the backyard.
Ha ha, taurus, good brand, i might also reccomend staying away from sig sauer, they sock. it doesn't matter the model, unless its a real gun (still iffy about that) or if its a rebranded (then duh its ok) and yes, use only silicon. thats your best bet, and the WD40 is really a killer for your gun internals, even spring. :-&
-
I have this gun too but i have the black version. It definately hits hard. the only bad things is is that the mags are so skinny and small that they will slip out of a vest pocket. I had four of them inside a mag pocket on my vest and they all fell out in a skirmish and i have no clue where they are.
-
WOW... posting 10 times in stupid, dead res threads? Did the status bug you that much? Little newbie want a hankie? Stop it.
-
my c11 mags never have a feeding problem, sure its cheap and wal mart but mine works like a charm