Author Topic: Tell me what you think about my project gun idea  (Read 1253 times)

Offline xtremeairsoft

  • Trade Count: (+3)
  • Master Sergeant
  • *****
  • Posts: 439
    • View Profile
Tell me what you think about my project gun idea
« on: March 10, 2011, 05:34:29 PM »
After reading, leave replies about what you think, suggestions, and anything else helpfull thanks
I will be putting together a really good CQB gun as soon as i get money. what i want to do is get a standard m4. remove the old barrel and install a 5.5 inch barrel and a 110mm (or somewhere around there) inner barrel. I'm going to be putting a 4 in rail system.
next i am going to remove the stock and buffer tube. the m4 will be wired to the front and i will put a peq battery box on the ris.
i am also going to put a new motor (Matrix 3000 turbo) and a m90 spring to lower the fps to around 300-330 fps. i will also put a vertical grip up front
and lastly i will put a Matrix Panorama red dot sight.
in total this will cost me near $330 so i am not starting soon
here is what it will look like(hopefully) but with the RIS in the other picture:

« Last Edit: December 31, 1969, 05:00:00 PM by Guest »
Zach Parks

Offline GhostSOCOMM4

  • Trade Count: (+3)
  • Second Lieutenant
  • *****
  • Posts: 819
    • View Profile
    • http://wolfpacktacticalsblog.blogspot.com/
Re: Tell me what you think about my project gun idea
« Reply #1 on: March 10, 2011, 05:46:05 PM »
What is your base going to be?
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »

Offline pballeraz

  • Trade Count: (0)
  • Staff Sergeant
  • *****
  • Posts: 207
    • View Profile
Re: Tell me what you think about my project gun idea
« Reply #2 on: March 10, 2011, 08:04:30 PM »
http://www.airsoftgi.com/product_info.php?cPath=408_411&products_id=5121
You could save yourself some time and buy this and upgrade the internals a bit
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »

Offline xtremeairsoft

  • Trade Count: (+3)
  • Master Sergeant
  • *****
  • Posts: 439
    • View Profile
Re: Tell me what you think about my project gun idea
« Reply #3 on: March 10, 2011, 08:24:11 PM »
To GhostSOCCOM4:
it was going to be a Matrix m4 because it is only $145

and  to pballeraz:
i might do that
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »
Zach Parks

Offline GhostSOCOMM4

  • Trade Count: (+3)
  • Second Lieutenant
  • *****
  • Posts: 819
    • View Profile
    • http://wolfpacktacticalsblog.blogspot.com/
Re: Tell me what you think about my project gun idea
« Reply #4 on: March 10, 2011, 08:36:43 PM »
Quote from: "xtremeairsoft"
To GhostSOCCOM4:
it was going to be a Matrix m4 because it is only $145

and  to pballeraz:
i might do that


Your going to have to do a lot of internal work then.
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »

Offline axisofoil

  • Trade Count: (0)
  • Colonel
  • *****
  • Posts: 1284
    • View Profile
Re: Tell me what you think about my project gun idea
« Reply #5 on: March 10, 2011, 08:50:17 PM »
Or... wait for
http://www.airsoftgi.com/product_info.php?products_id=2328
To come back in stock... and you won't have to upgrade/downgrade anything.
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »

Offline AddoAduro

  • Trade Count: (0)
  • Master Sergeant
  • *****
  • Posts: 353
    • View Profile
Re: Tell me what you think about my project gun idea
« Reply #6 on: March 10, 2011, 11:17:47 PM »
Quote from: "axisofoil"
Or... wait for
http://www.airsoftgi.com/product_info.php?products_id=2328
To come back in stock... and you won't have to upgrade/downgrade anything.

He speaks the truth.
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »
Quote from: \"XavierMace\"
Every day I have to wade through mountains of stupid posts on forums by kids who feel it necessary to share their personal life on the internet like they think we care.

Offline xtremeairsoft

  • Trade Count: (+3)
  • Master Sergeant
  • *****
  • Posts: 439
    • View Profile
Re: Tell me what you think about my project gun idea
« Reply #7 on: March 11, 2011, 07:18:07 AM »
Quote from: "GhostSOCOMM4"
Quote from: "xtremeairsoft"
To GhostSOCCOM4:
it was going to be a Matrix m4 because it is only $145

and  to pballeraz:
i might do that


Your going to have to do a lot of internal work then.

i am not doubting you because i dont have experience with matrix, but why would i need to do a lot of internal work
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »
Zach Parks

Offline GhostSOCOMM4

  • Trade Count: (+3)
  • Second Lieutenant
  • *****
  • Posts: 819
    • View Profile
    • http://wolfpacktacticalsblog.blogspot.com/
Re: Tell me what you think about my project gun idea
« Reply #8 on: March 11, 2011, 09:29:19 AM »
Quote from: "xtremeairsoft"
Quote from: "GhostSOCOMM4"
Quote from: "xtremeairsoft"
To GhostSOCCOM4:
it was going to be a Matrix m4 because it is only $145

and  to pballeraz:
i might do that


Your going to have to do a lot of internal work then.

i am not doubting you because i dont have experience with matrix, but why would i need to do a lot of internal work

Its Matrix. Well, what are you going for on this gun? High ROF or just a stubby M4?
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »

Offline BreechUnClear

  • Trade Count: (+1)
  • First Lieutenant
  • *****
  • Posts: 874
    • View Profile
Re: Tell me what you think about my project gun idea
« Reply #9 on: March 12, 2011, 07:48:02 PM »
I have a stubby front end up for grabs, perfect for what you're looking to do, really cheap. full metal. free float.
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »

Offline G1zm0

  • Trade Count: (0)
  • Master Sergeant
  • *****
  • Posts: 389
    • View Profile
    • http://www.sg12.org/Roster_files/G1zm0.htm
Re: Tell me what you think about my project gun idea
« Reply #10 on: March 12, 2011, 08:00:17 PM »
I think allied surplus @ 43rd and Northern might have ICS for sale. call and check.
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »

Offline Enemay

  • Trade Count: (0)
  • Private
  • **
  • Posts: 11
    • View Profile
Re: Tell me what you think about my project gun idea
« Reply #11 on: March 13, 2011, 06:15:59 PM »
Quote from: "xtremeairsoft"
Looks pretty sweet. Good luck with it.  8)
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »