Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - dgibbons

Pages: [1]
1
Troubleshooting / Broken gear tooth
« on: August 06, 2013, 05:54:02 PM »
I just installed a 13:1 SHS gear set along w/spring guide, piston & head.
All seemed good yesterday.  Went to test fire today & about half way through
the midcap the gearbox started grinding.
Open the box & see one of the teeth on the sector gear broken off.

What did I do wrong?

Thanks for the help.

2
Airsoft Items FOR SALE / Sold
« on: July 19, 2013, 08:39:25 PM »










Time for a new home for the Scar.  I just don't use it so I'd like to sell it & get something else.
Air nozzle & bushings were replaced after I got it.  Chrono's around 330 fps w/ .20's
$150 as pictured. 
I'll go lower if you don't want the magpul flip up sights & afg.
Includes 1 mid cap pictured & 7.4 1800 mah lipo wired to deans.

http://www.youtube.com/watch?v=vmvBn9xrsjk&feature=c4-overview&list=UUVh8bOf0-BWLr1Zo_uv_o2g



http://www.flickr.com/photos/99145732@N03/9325822376/in/photostream/

Also have an Elcan Clone 4X32 w/red dot.  I've tried it a few times & keep going back to my
reflex sight. 
$130

http://www.flickr.com/photos/99145732@N03/9325825190/in/photostream/





PM if you have any questions or would like pics.

3
Troubleshooting / Dead AEG - ver 2
« on: June 08, 2013, 08:15:31 PM »
This is a recently rebuilt combat machine.
replaced spring, piston & cylinder head & air nozzle.
Probably fired 500 + rounds prior to beinging fielded today.
Around the third game today It simply stopped firing.

I opened the gearbox & all seems fine.
I tried a different battery & nothing.

I need help.  Thanks for looking,

4
Troubleshooting / Gun won't feed on full auto
« on: May 19, 2013, 06:59:40 PM »
I just replaced the gears in my m4 gearbox & upgraded some other parts.
Feeds ok on semi but not on full auto.  I put a G&P 120 motor & all worked fine
when I test fired it a couple days ago.  I went to chrono today & now the feeding
problem.

This is a different combat machine from my original post.

What did I do wrong?

It's a G&G combat machine.  I also swapped the air nozzle, piston head & spring.

Thanks for the help.

5
Troubleshooting / Recommend a mosfet?
« on: May 16, 2013, 06:39:32 AM »
I'd like to run my G&P m4 on a 3s lipo.  It's currently completely stock internals.

Should I install a mosfet?  If so, which one would you recommend?

Thanks for the help.


6
Local Games Listing/RSVP / New Hatfield - 03-17-13
« on: March 16, 2013, 04:52:40 PM »
Kinda short notice,  but who wants to come out tomorrow.

All ages welcome.

400fps-.20bb

9:00am show 9:30 start

Have 3 comfirmed right now.






7
Airsoft Items WANTED / WTB 200 mm (8") 14mm ccw mock suppressor
« on: December 31, 2012, 07:21:25 PM »
Just like it says.  I want to put a new tbb in my scar. 

Let me know what you have. 

PM me or send me an email  - dgibbons12@gmail.com

Thanks

8
Airsoft Items WANTED / WTB M4 outer barrel & tbb
« on: November 30, 2012, 09:14:19 AM »
I'm looking for a 10" m4 outer barrel.

also interested in a 6.01mm X 400-455 tbb.

Send me a pm.


Thanks for looking

9
AEG's / Echo 1 Scar Light
« on: November 26, 2012, 09:50:01 PM »
I bought this used & was told it should chrono around 380 fps w/ .20's.  I'm only getting around 300 fps w/.20's.
I have installed a madbull 6.03 tb & replaced the hopup & bucking.  What should I look to upgrade?

I'm probably looking for a tech that can take a look @ it for me.

I'm in the North Valley around Carefree Hwy & I 17.

Thanks for the help.

10
AEG's / Prometheus tbb
« on: November 09, 2012, 11:33:32 AM »
I apologize if I've posted in the wrong forum.

Would anyone be able to direct me to a supplier for 6.03 Prometheus tbb?

Thanks for the help.

11
Airsoft Items WANTED / WTB Prometheus 6.03 X 407 mm TBB
« on: October 31, 2012, 08:26:22 PM »
New to the forum.

I'm now looking for a Prometheus 6.03 X 407 mm TBB.

Also a buffer tube sling mount for an M4

email me @  dgibbons12@gmail.com

Thanks for looking




I'm looking for a good GBB.  Extra mags would be great. 

I'm in North Phx around Carefree Hwy & I 17.  Let me know what you have.

Thanks for looking.

Pages: [1]