Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - ZombiePancake

Pages: [1] 2

Airsoft Items FOR SALE / I need BBs for Sasco game!

« on: January 16, 2015, 05:24:37 PM »

So my bbs didn't get delivered today. I need them for the Sasco game tomorrow. If someone has some .30g or .32g bbs I will buy them off you, or if you vould go buy some I'll pay you back plus some extra compensation. If worst comes to worst I'll use .28g. Thanks in advance.

General Airsoft Game Discussion / AMS: Operation Copperhead. Playas, NM.

« on: December 29, 2014, 01:24:48 PM »

I don't know if any of you guys have been following this, but American MilSim has released the date for the New Mexico AO. The dates are April 11-12, 2015. Really looking forward to this as its only 3 hours away from me(Tucson).
250 buildings, furnished and small commercial buildings.
https://www.google.com/maps/place/Playas,+NM+88009/@31.9142484,-108.5332123,2953m/data=!3m1!1e3!4m2!3m1!1s0x86d96f286fd03721:0x8a25fe9c53160b7b

Airsoft Items FOR SALE / Multicam 6094, MAP, BFG, Combat pants, Fast Helmet, Sordins etc.

« on: November 15, 2014, 08:13:52 PM »

Rules!
1.) No thread crapping
2.) Prices include shipping (unless meeting face to face)
3.) Any questions PM me.
4.) No refunds. I will describe items to the best of my abilities.
5.) I'm located in Tucson, AZ

Buy multiple items and receive a discount.

Only trades are Wolverine SMP v2. Aor2 pouches and boonie. Aor1 6094/jpc and pouches. 3x FTS magnifier. And that's about it.

1. TMC multicam 6094a. Only used in a few games. Like new condition. Will come with hard mag insert. No plates. $80 shipped.

2.Pantac USA MAP pack. Genuine multicam. Comes with 3L bladder. $60 shipped.

3. BFG multicam ten speed helium whisper triple mag pouch. Good amount of discoloration from mags. Elastic still in great shape. $30 shipped

4. BFG multicam ten speed helium whisper double mag pouch. $25 shipped.

5. Emerson Multicam gen3 crye style combat pants. Size 32w. Looks exactly like genuine multicam. $50 shipped.

6. Lancer tactical AOR2 gen 3 combat pants. Size large. Will fit waist 32-36 maybe 38. No knee pads. $40 shipped.

7. Premium Fast helmet. Size m/l. Has adjustable size knob on the back. Comes with z - tac sordins and arc rail adapters. $100 shipped.

8. Condor multicam EMT pouch. 15 shipped.

9. Condor multicam triple m4/ pistol pouch. $15 shipped.

10. Crye style multicam single m4 pouch. $12 shipped.

11. Boogie regulators with helmet strap kit. $30 shipped.

Airsoft Items FOR SALE / WTT/WTS VFC V3X Light and Element dual pressure switch

« on: October 09, 2014, 06:53:21 AM »

Rules!
1.) No thread crapping
2.) Prices include shipping (unless meeting face to face)
3.) Any questions PM me.
4.) No refunds. I will describe items to the best of my abilities.
5.) I'm located in Tucson, AZ

Only interested in trading the combo for a Bravo/Night Evolution M600c replica and a Night Evolution dual pressure switch. Pics for reference.
http://www.ebairsoft.com/nightevolution-07011-remote-dual-switch-plug-p-6524.html
http://www.evike.com/products/48204/

I just recently purchased the VFC V3x from Evike so it hasn't been to any games. I bought the element dual pressure switch second hand, but it is in good condition and functions as it should. I will sell the combo for $60 shipped, but would prefer trading it. Thanks!

Airsoft Items FOR SALE / WTT/WTS A&K Masada Upgraded

« on: August 07, 2014, 08:47:03 AM »

Rules!
1.) No thread crapping
2.) Prices include shipping but the 3% paypal fees will need to be including(unless meeting face to face)
3.) Any questions PM me.
4.) No refunds. I will describe items to the best of my abilities.
5.) I'm located in Tucson, AZ.

WTT/WTS A&K Masada Upgraded

Would really like to trade for a MK18 or RIS II M4 or will sale for $270 obo.(can possibly add cash for the right trade) What you get is an A&K Masada that has been painted a very light snake skin pattern and the pictured eotech replica and a G&G tan high cap. (Flashlight not included). Internal parts are as listed.

G&P gearbox shell and G&P 8 mm bearings. (super glued to shell)
Stock cylinder/head
Stock nozzle
Prometheus M120 spring
Ball Bearing spring guide
G&P Sector gear
XYT flat gear
Stock bevel gear
Matrix (SHS) 14 tooth piston
G&P Explosive piston head
AoE has been corrected
G&P tappet plate
Fairly new Lonex A2 motor
Stock hop up (barrel lock is missing)
Flat hop bucking
Angel custom H-nub
Madbull black python 363mm barrel
Stock wiring with deans (removed fuse)
Custom Paracord sling mount.

Airsoft Items FOR SALE / Custom G&P M4 "DMR"

« on: May 25, 2014, 10:23:19 AM »

Rules!
1.) No thread crapping.
2.) Prices include shipping but the 3% paypal fees will need to be including. (unless meeting up f2f)
3.) Any questions PM me.
4.) No refunds. I will describe items to the best of my abilities.
5.) I'm located in Tucson, AZ.
6.) No Trades!

Up for sale is my custom G&P DMR. This gun was not built off of a base gun. It started from a G&P ProKit which is no longer offered on Evike. It's the tan Seal Team Six body with a polymer trigger guard. I'll list the parts back to front. The short dot or 553 are not included but can be at an additional cost.

The stock is a Mssion First Tactical Battlelink Minimalist in Scorched Dark Earth.
Buffer tube is a G&P 6 position wired to rear with deans
Magpul MOE 2nd gen pistol grip in dark earth.
Magpul ASAP sling adapter in black
G&P Seal Team Six metal body in dark earth
1 G&P High RPS mid cap in dark earth
ACM Magpul MBUS sights in black
Echo 1 9.5" outer barrel
VTAC Viking Tactical 13" rail in dark earth
Magpul AFG2 in Multicam
The mock suppressor is a Madbull Gemtech in dark earth and is included along with the outer barrel extension

Internally it's a stock G&P M120 gearbox with a G&P M120 motor.
It has a ProWin hop-up chamber with a REAPS A+ bucking flat hopped with a modify flat nub.
Inner barrel is a Lonex 433mm 6.03 Steel tightbore.
I'm also including the battery which is a nano-tech 11.1v 15-25c 1400mah

I have never taken it out to any games and I just hate to see such a beautiful rifle not get put to use.

Asking $300 firm shipped + paypal fees.
$340 Shipped with 553 pictured
$380 Shipped with short dot pictured

Will sell the 553 for $50 shipped
The short dot is a Bushmaster scope in an ACM Larue SPR 1.5 mount with trademarks. Would like $100 shipped.

Airsoft Items FOR SALE / WE Scar-L GBBR(CB). JG G36C. CA M4 Metal Body. M203. Eotech. Acog.

« on: February 07, 2014, 09:26:26 PM »

Rules!
1.) No thread crapping
2.) Prices include shipping but the 3% paypal fees will need to be including
3.) Any questions PM me.
4.) No refunds. I will describe items to the best of my abilities.
5.) I'm located in Tucson, AZ.

Pics to everything for sale in my photobucket album http://s596.photobucket.com/user/ZombiePancake69/library/airsoft%20sale?sort=3&page=1

First off we have a WE Scar-L in tan. Its the older closed bolt model. It shoots but the bolt likes to get sticky due to the cool down of the propane. Comes with 3 mags. ALL leaky gen 1 mags. One mag has no base plate and doesn't hold gas at all. Vertical Grip included. Cosmetically in good shape. $100.00 O.B.O

Next up is a JG G36C. Older model with plastic bushings and sweet Golden Bow trademarks lol. SRC High torque motor, SRC XM8 metal hop-up, SRC XM8 full metal charging handle. Comes with 4 JG black high caps and 2 smoke/clear SRC high caps with markings and a 7.4v 1600mah 20c lipo. Motor cage is a little funky and could use replacing and the selector plate broken, so I glued it in full-auto position. Also has a stock G&P inner barrel and I think a REAPS A+ bucking, can't remember. Was a loaner/back-up and has never let me down. $80.00 O.B.O

Next is an old Classic Army full metal M4 receiver with the old 2-pin upper. Its a complete body with selector switch, body pins, mock bolt release, mag release, charging handle, buffer tube, buffer tube spacer, buffer tube screw, pistol grip and motor cover(no screws for either) a 10.5" outer barrel with a free float rail. Also comes with a spare, completely blank upper receiver. $50.00 O.B.O

Now some accessories.

Legit Magpul PTS MOE handguards in FDE with 2 MOE rail segments. Like brand new. $30.00 O.B.O

Replica two-tone Eotech 551. Tan base and black outer shell. Could use new batteries. In good condition. (reticle looks blurry because my shakey hands.) $40.00 O.B.O

Replica Acog red dot sight. Pretty old and used. No batteries, but does function. $30.00 O.B.O

Next is what I believe is a Classic Army rail mounted M203 long tube. Has metal frame with plastic tube and trademarks removed. It's pretty old but still functions properly. The handguard is chipped on the right side. $40.00 O.B.O

And last we have a AGM metal M4 hop-up chamber. Completely blank. No wheels or arms. $5.00 o.b.o

Airsoft Items FOR SALE / Pro-arms JPC khaki with multicam pouches. KJW G23 3mags+ holster

« on: November 08, 2013, 08:12:43 AM »

Rules!
1.) No thread crapping
2.) Prices include shipping but the 3% paypal fees will need to be including
3.) Any questions PM me.
4.) No trades!
5.) No refunds. I will describe items to the best of my abilities.
6.) Im located in Tucson, AZ

Items for sale!

1.) KJW G23 $100 shipped
About 500 rounds through it in excellent working shape.
Scuff marks on front of slide from holster
Comes with 3 mags total and uncle mikes holster.

2.) Pro-Arms JPC in Khaki. Medium size. With Pouches! $125 Free shipping
HPA Tank pouch not included
BFG Helium whisper triple m4 mag pouch (multicam)
BFG Helium whisper double m4 mag pouch (multicam)
Condor EMT pouch (multicam)
Pantac MAP Pack with bladder (multicam)
King arms replica sapi plate (front only)

Thanks!

Airsoft Items FOR SALE / Parting out my gun! DD MK18 rail! Prommy barrel! Magpul! G&P

« on: September 19, 2013, 11:20:41 AM »

What's up everybody! I'm looking to part my gun out because I want to build a different style, something for field length. I'll post what I'm parting out then pics are to proceed. Front to back.

G&p 10.5" outer barrel $20
Black Metal FH cw thread. $10
Madbull DD MK18 rail $80 or $100 with hand stop and rail covers
Magpul xtm hand stop $15
Prometheus 300mm inner barrel $50
G&p magpul m4 metal body $80
Tan replica eotech with trademarks $50
Tan Magpul PTS MOE pistol grip $20
Tan Magpul PTS MOE handguard with 2 rails $30
NC Star quad rail $30 http://www.airsoftgi.com/product_info.php?products_id=5186
JBU Olympics arms quad rail. Old and painted. $20 http://www.airsoftmegastore.com/4353-ACC-SDJB28-JBU-Licensed-Olympic-Arms-Rail-FIRSH-Handguard-7-125-in.aspx

ONLY trades I would consider are Troy trx 13" rail, 16" outer barrel, Prommy 407mm barrel and a replica t-1 aimpoint in fde.

Airsoft Items FOR SALE / G&P DD Rail $50, CA M4, Tokyo Marui M3 Super 90, PARTS!

« on: August 13, 2013, 10:04:55 PM »

Hey guys looking to part with some of guns that I never use anymore and whatever parts I have laying around. I'm located in Tucson. Feel free to pm me for further questions.

G&P Daniel Defense AR Lite 7.0 rail replica. $50

looks like this without DD trades
http://www.evike.com/product_info.php?products_id=33131

How my gun looked with the rails.

$20.00 ICS special weapons mp5 metal body. Perfect to swap out your plastic body as no hardware is included.

Next gun is a Classic Army M4 with crane stock wired to rear. Wiring is fixed!! Comes with 1 mag midcap. $140.00 with acoq $120.00 w/o acoq

Tokyo Marui M3 Super90 3 shot burst shoots okay, missing shell holder cover, holds shell just fine. $40.00 o.b.o

Echo 1 P90 body. Only includes hop-up and whats pictured. $40.00 o.b.o

AGM Upper receiver(metal) with G&G rail kit(all metal) $20.00

Charging handle $5
2x Carry handles $5 each (1 agm metal 1 kwa plastic)
3x M4 pistol grips $10 each. (OD G&G, Black KWA, unknown tacticool one)
KWA metal upper receiver $20.00
KWA LE M4 stock $10.00
2x AGM metal lower receivers $10.00 each
2x AGM metal M16 length outerbarrels $10.00 each.

Everything in pic below $5 each.

KWA m4 tappet plate(black)
KWA top hop-up unit
3x KWA 9mm bearings
SRC G36/XM8 tappet plate(blue)
SRC g36/XM8 nozzle(blue)
Gears are mainly xyt/jg except for the black spur gear is a KWA.

M4 body pins $5
half mag release. free with purchase
metal stock spacer. free with purchase
CA chopped rear sight $10.00
KWA motor $10.00

Airsoft Items WANTED / WTB: Mid length rail system and replica eotech!

« on: May 23, 2013, 11:02:19 AM »

Hey guys, I'm looking to buy a mid length rail system, about 9"-10" in length. Must be a free float system and must be compatible with the G&P PTS MOE upper receiver. Also I'm in the market for a replica eotech, must be in good working condition. I don't really have anything for trade, but I do have cash, so post offers below. Thanks.

Airsoft Items FOR SALE / KWA M4 and D-boy SCAR-H

« on: September 12, 2011, 02:25:47 PM »

NO TRADES!! NO TRADES!! NO TRADES!!

I have for sale a kwa m4 cqb converted to a full size m4 with a G&G outer barrel an m16 tightbore inner barrel and a surpressor to cover the inner barrel. The kwa has an SHS 14 steel tooth piston with AoE corrected a madbull ultimate hop up, I dremeled the lower reciever for the hop-up to fit. It has a madbull blue hop bucking with an SCS hop nub, Element wire kit and SHS M120 spring and G&P 120 motor. External upgrades are a 2 piece ris unit held together by 4 screws and is really solid. A magpul MOE pistol grip in tan and a G&P 416 short full stock in tan. Wired to the rear with deans. Comes with 6 mids and 3 high caps. $150

Next is a D-Boy Scar-H, completely stock except r2for a madbull inner barrel and kwa 2gx hopup bucking and nub and a better motor. Shoots soo much better with the barrel upgrades. Comes with 1 highcap, a tan eotech replica(no ghosting) a forward grip and the stock 9.6v battery. Only put one highcap through it. $150

http://i596.photobucket.com/albums/tt42/ZombiePancake69/airsoft/Resampled_2011-08-02_18-59-15_865.jpg

http://i596.photobucket.com/albums/tt42/ZombiePancake69/airsoft/Resampled_2011-08-02_18-32-08_647.jpg

http://i596.photobucket.com/albums/tt42/ZombiePancake69/airsoft/2011-08-02_18-41-21_206.jpg

http://i596.photobucket.com/albums/tt42/ZombiePancake69/airsoft/211-1.jpg