Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Spaceman

Pages: [1] 2
1
Airsoft Items FOR SALE / WTS: Heavily Upgraded CYMA AK105/AK74M (CM040)
« on: January 01, 2017, 05:07:29 AM »
Picked this gun up used, decided to re-vamp it completely. Prices are OBO, shipping and paypal fees included, but would prefer to meet. Please no lowballs, I will probably just ignore it, but I will consider any reasonable offers.

AKs are just not my cup of tea, mag switching my M14 is painful enough.

The gun is relatively flawless except for some typical AK selector issues, but in no way impedes the functioning of the gun.

I eliminated stock wobble with use of electrical tape.

Now to the good: Gun has great compression, shimming, trigger response, and longevity. Gearbox shell is radiused, AOE has been corrected with Sorbo, and has been properly lubricated with SuperLube.

Shooting 355 +- 5 FPS at 18.3 RPS with a low c-rating 11.1v. Spring can be changed if absolutely necessary.

Parts/Price Breakdown:

Externals:
CM040 (including original hi-cap and original stock): $170
JG Folding Full Stock: $28
RIS Handguard: $20
3 x G&P Mids: $45
2 x CYMA Mids: $24
1 x E1 Hicap: $10
1 x AK47 Hicap: $10

Internals:
Stock barrel/hop-up assembly. Flat-hopped by yours truly in conjunction with a Modify flat-hop nub.
Stock CYMA Neodymium Motor
Stock Gearbox shell
SHS Nozzle: $4
SHS Cylinder Head: $8
ZCI Full Cylinder: $8
Ares Full metal piston/ported poly head: $10
SHS M110: $4
SHS Spring Guide: $10
ZCI 16:1s: $20
SHS Tappet: $4
Tactical Nukefet: $30
However much you think my work is worth: $x

Totals to $405+

Asking $350.

Everything in the picture is included besides my carpet.






2
Airsoft Items FOR SALE / WTS: Madbull Mock Suppressor
« on: December 31, 2016, 08:28:54 PM »
Mock suppressor in pretty decent condition. Prices are OBO and include shipping. Full, licensed, intact trades. Not hollow or foam-filled, just solid metal (Aluminum)

Madbull Gemtech Halo (Tan) - $50 Shipped, cheaper if you want to meet up.
-Near-perfect condition, minor scratch and a paint smudge on the very tip.
-Slides over standard M4/Birdcage style flash hiders



Black one is sold.

3
Airsoft Items FOR SALE / WTS: AIM 4x32 ACOG-Style Scope
« on: December 31, 2016, 08:24:23 PM »
Shipping included in price, OBO, but please no low-balling; I will just ignore it.

Ships using USPS Priority ($6.45, if you need to calculate how much you're paying for the optic).

Like-new AIM Sports 4x32 Tri-Illuminated Sight

Red, green, blue illuminated standard crosshairs, fiber optic back-ups.

Just some fading on the paint from taking it on and off of my beautiful 416.

Comes with the optic, original packaging, cloth sheath, and battery.

$70, shipped. Will do cheaper if you want to meet up. Located West Valley, Peoria, AZ.






4
Airsoft Items FOR SALE / WTS: ATACS FG ACUs, Multicam BDU Pants
« on: August 30, 2016, 03:03:52 PM »
X-posted on Airsoft Society. PM me on here or text me at (602) 810-2722. Prices are OBO.


Propper ACU Jacket (ATACS, M/L) AND Propper ACU Pants (ATACS, M/R)

Like new, bought as a set for green team, got assigned to tan team, only worn to try them on.

$60 for both, together. Don't really want to part out.



Propper Boonie Hat (ATACS)

$10



Truspec BDU Pants, Medium/Regular. Fits waist: 31-35, inseam: 29.5-32.5.

$30



5
Airsoft Items FOR SALE / WTS: Black Emerson JPC, Crossdraw Vests
« on: August 30, 2016, 02:25:10 PM »
Trying to liquidate some of my gear that I'll never use, I guess this will be good for people who want to play as Merc's at Stryker. X-posted on Airsoft Society. PM me on here or text me at (602) 810-2722. Prices are OBO.

Have an Emerson JPC that's sat in my closet in its travel bag since I won it. Tags still on it. Took it out to try it on once, then put it back in.

Also includes the built-in kangaroo pouches and a UTG Belt/Drop-Leg holster in black, good for holding compacts. I have black pistol mag pouches that mount the belt I will include too, just weren't on it when I took the picture.

$60



Condor OD Crossdraw Vest, Like new, never used. Includes vest, belt, holster, pistol mag pouches. $50


Condor Tan Crossdraw Vest, good condition. Includes vest, belt, holster, pistol mag pouches. $45

6
Airsoft Items FOR SALE / WTS: Helmets
« on: August 30, 2016, 02:17:47 PM »
Prices are OBO, x-posted on Airsoft Society. PM me or text me at (602) 810-2722.

Helmet (Desert Digital) - Missing the male buckle and one bungee strap. Has ARC Rails. Otherwise, lightly used. $20


Helmet (RG) - Has picatinny rails. Lightly used. $25


Helmet (Tan) - Lightly used. $15

7
Airsoft Items FOR SALE / Re: Guns, Guns, and more Guns!!!
« on: August 30, 2016, 01:38:56 PM »
Would you be willing to part out the extra SL8 stock?

8
    I'm looking for a small, low-profile hydration carrier that satisfies the following:
    • MUST attach to molle, wearing a backpack with traditional straps over a PC will not work for me
    • Integrated Storage (preferred)/small enough to fit pouches on back/has its own molle
    • Must carry a decent amount of water for hot Arizona days (2-3L)
    • Doesn't hang over the back of the 6094a
    • Small enough to still be comfortable riding in vehicles
    • Preferably doesn't break the bank
    • Preferably removable straps to use a backpack/standalone carrier
    • Multicam-preferred, Coyote/DE might be acceptable

    Also looking for ideas to minimize my profile, weight, and to streamline the sides.

    My current rig includes:

PC
LBT-6094a

FRONT
LBT-2645 Kangaroo Triple 5.56 Insert
3 x HSGI Tacos
Admin Pouch

LEFT (FRONT)
3 x Blackhawk Flash Grenade Pouches (holds 2 x ThunderBs and 1 x Tornado)
Back Left is empty for access to belt-mounted dump pouch and streamlining, although another pouch on my weak side wouldn't interfere too much.

RIGHT (FRONT)
Tear-Away IFAK
Most of right is empty for access to belt-mounted pistol and streamlining, really wanting to keep this side as clear as possible.


BACK
Dual 5.56 Pouch for buddy mags
GP Pouch that I can reach with arm behind back
Looking to replace the back with Hydration Carrier + Pouches or MAP
Back of the 6094a has 6 molle columns wide by 6 molle rows tall


IFAK is in a pretty necessary spot.
I tried moving my grenades to either side of my admin pouch, but they interfere with shouldering a rifle.
I also tried placing them on my back, but it was too difficult to unhook the pouch and draw the grenade in any timely manner, so they're stuck on left side, but they add a lot to a larger profile.
Radio is not necessary.

Hydration Carriers/MAPs I was looking at:

Hydration Only
  • SKD PIG Hydro - 2L This is probably one of the biggest candidates as it is a good height and somewhat affordable ($100 for carrier and bladder). However, it doesn't have straps to be used as a regular backpack and I'm not sure if it would allow for additional pouches to the side.
  • Camelbak ArmorBak Moderately affordable ($80), fits the back of 6094, carries 3L. However, Camelbak's new bladders have had issues with leaking when under pressure, it doesn't attach via molle (uses grimlocs), doesn't have straps for use as standalone, and may or may not allow for additional pouches on the back.
  • TYR Tactical Hydration - 50oz Horizontal Moderately affordable ($60-70 for carrier + bladder), would allow me to put mag pouch and GP pouch below it. However, only carries 1.5L of water.
Hydration + Cargo
  • GMR MiniMap and Pantac MiniMap These were perfect for what I was looking for, however GMR was limited edition, and I can only find the Pantac ones on AmpedAirsoft, and they have very limited color selection. This was the perfect size, included an integrated dual-mag pouch+hydration+straps+molle+additional storage. If anyone knows where to get one of these, please let me know.
**I found the larger version of Pantac's MiniMap, the LWMS. It is a pretty sweet bag, but it honestly looks like the molle webbing they used is woodland on the multicam bag. You can find these for $63 on WGCshop (not sure if it comes with a bladder), or $112 from Redwolf (comes with bladder), or $160 from PantacUSA, I just wonder how large they are as I can't find any dimensions.***
  • LBX-T Mini MAP Fits on 6094 (and it's LBT), has additional storage options. However, it is somewhat pricey ($120 with no bladder), and only carries 1L of water.
  • Pantac MBSS (MAP Replica) Additional storage, moderately affordable ($80), carries 2L, includes straps to use as a backpack. However, requires me to order from RedWolf (although this would give me an excuse to buy an eglm too), and has no molle for additional pouches/goodies.
  • Condor Hydration Carrier II Affordable ($30-40), carries 2.5L, includes straps to use as backpack, and has additional storage. However, hangs over 6094a by about 1 inch, it's Condor, bladders are questionable, and doesn't come in Multicam.

I also looked into the Flatpack and some Mystery Ranch stuff but they didn't quite strike my fancy.
If you have any other recommendations or own any of the above, please share (pictures would be nice too).[/list]

9
Bump, added link for pictures, some prices lowered.

10
Airsoft Items FOR SALE / Re: Echo 1 M14 dmr for sale
« on: April 10, 2016, 02:38:57 AM »
What condition is it in? Any upgrades besides the spring and are there any problems? Also, do you happen to have any pictures? Possibly interested.

11
waht brand are the p90 parts?

No oblong gearbox shim, sorry Spazz. Good luck finding a TM one though.

12
If you have any questions, comments, or concerns, please leave a post here or text Hunter at (602) 810-2722. I don't really check PMs that often, but you can still reach me there if you need to. I've got quite a few things I wanted to part ways with so here we go. Prices are OBO, trades are very limited to like a GBB MP7 or Tan EGLM but if you have something you think I might be interested in, the worst thing that can happen is I tell you no.

GUNS

WE 1911 MEU GBB Pistol (OD/Black, Railed Version) - NEW, IN BOX - $100
I won this gun from a box from a retailer that starts with an E, and as I already have the older, two-tone desert version of this pistol, I figured I would just sell this one.
Includes packaging and one magazine.


King Arms LSR1 - NEW, IN BOX - $150
This was the second part of the box from a retailer that starts with an E, these are now discontinued, but magazines and parts support can still be found on E.
In all honesty, this is a pretty sweet looking gun, and it used to MSRP for quite a bit, I'm just not big into springers anymore.
Includes packaging and one magazine.


6MM Proshop 40MM Hand Grenade Launcher - NEW, IN BOX - $40
Also won this from a retailer that starts with an E.
Does NOT come with a grenade.


UTG MK96 - USED - $50
I've had this gun for years, but as stated earlier, I'm not a fan of springers.
Very light wear on this, just cosmetic scratches.
Includes 3-9x40 NCSTAR Nitrogen Scope, a spare bolt/springbox assembly, and 2 magazines. Sadly, does NOT include any scope rings.


PARTS & GEAR

P90 Gearbox Shell - Offer
Includes shell, spring, cylinder, cylinder head, piston, nozzle, selector switch, and top locking plate.
No gearbox screws.

P90 Hop Up Unit + 2 x P90 Inner Barrel - Offer
Complete hop up unit, 2 inner barrels (no idea what diameter).

P90 Hicap Mag - Offer
No idea what brand or capacity this is.

Classic Army M4/M16 Metal Lower Receiver (Black) - Offer
6.8mm trademarks.
Includes selector switch and trigger guard.

G&G M4/M16 Metal Lower Receiver (Tan) - Offer
Includes selector switch, trigger guard, and body pins.
Weird buffer tube mounting system that I haven't quite figured out, may be like the real steel buffers.

Knight's Armament OD Rail Covers - Offer

Unknown 2-piece RIS Unit - Offer

OD Sling - Offer

3 x 5KU Keymod AFG - NEW - $8 each

5KU Keymod Handstop (Red) - NEW - $8

USP .45 Hammer/Recoil Spring - NEW - $8



More items + pictures to come.

13
Airsoft Items WANTED / M4 Externals and GBB MP7
« on: March 15, 2016, 02:19:38 AM »
I'm looking for the following parts for a boneyard build:
-Full Metal M4 upper (used/boneyard, preferably with charging handle/dust cover/bolt/etc. Color doesn't matter, black or tan)
-M4 Buffer tube with locking ring
-14.5 inch or 16 inch M4 outer barrel
-MAYBE a metal m4 hop up, but these are cheap even if new

I've also been really craving an mp7 for my arsenal, if anyone happens to be selling one in good condition with the low power bolt (so I can play at local fields) and a couple of mags, let me know.

14
Airsoft Items FOR SALE / Re: Guns, Guns, and more Guns!!!
« on: March 13, 2016, 12:40:31 PM »
PM'd about M4 parts from box of things.

15
Bump, updated and lowered.

Pages: [1] 2