Airsoft Arizona

Airsoft Hardware => Troubleshooting => Topic started by: Patty o' Brian on July 11, 2005, 06:12:37 PM

Title: KJW M9
Post by: Patty o' Brian on July 11, 2005, 06:12:37 PM
I recently purchased a KJW M9. When i first got it it worked great i could get about 2 mags worth of gas. Then after a few games with my buds it just would not use gas efficiantly. when i pull the trigger it shoots but a lot of gas escapes through the barrel. i now can only get about half of gas with the same fill as before. I lube it regularly but still the same problem occures. Please help me.

Patty
Title:
Post by: andyhinds on July 11, 2005, 06:20:21 PM
had same problem with both mine, lube the O-Ring.
Title:
Post by: mohawkdude on July 11, 2005, 06:20:21 PM
sounds like you have a broken seal somewhere in the clip or the gun.
Title:
Post by: busta_cap on July 11, 2005, 06:23:53 PM
Quote from: "andyhinds"
had same problem with both mine, lube the O-Ring.
Its the loading muzzle o ring, by the way...
Title:
Post by: Patty o' Brian on July 11, 2005, 06:40:41 PM
thank you all for your help.
Title:
Post by: azsarge on July 11, 2005, 06:42:32 PM
Theres no o-ring in the loading muzzle.

What this sounds like is a ripped piston head.
Title:
Post by: Patty o' Brian on July 11, 2005, 07:27:37 PM
no the piston head is fine. i lubed it up in where i think the o ring is. Andy if you have a picture of where it is or a good description i would appreciate it.
Title:
Post by: busta_cap on July 11, 2005, 07:31:24 PM
Quote from: "azsarge"
Theres no o-ring in the loading muzzle.

What this sounds like is a ripped piston head.
Same thing... ;)
Title:
Post by: Anonymous on August 07, 2005, 12:30:09 PM
if its the top thats leaking, its simple, itll either have a place for an allen wrench or a phillips head scredriver, unscrew it, and the prob usually is the o ring falls out, just put it back in place, give it some lube, make sure the scre is tight when srewed back in, and it should atleast lessen the leak greatly, if notcompletely fix it