Airsoft Arizona
General Airsoft Arizona => General Airsoft Discussion => Topic started by: Mandals on June 19, 2012, 05:31:54 PM
-
My RoF is very good but im not getting a solid stream of bb's. It seems like its not feeding fast enough. I have both midcap and highcap mags which both result is the same problem. Any suggestions?
I have a G&G pws diablo upgraded with Bravo Heat-Treated Steel Enhanced High Speed Gear Set, JBU 6.03mm High Precision Inner Barrel, and King Arms 11.1v 1300mAh LiPo.
-
some better mags may help the issue. In the past I ran a gun the shot 46-52~rpm and my mags just couldn't keep up. I started using the Magpul pmags and that fixed it for me.
-
Install a sector chip
-
I currently use the 75 rnd magpul p mags...sector chip okay ill look that up
-
http://www.evike.com/product_info.php?products_id=26222 (http://www.evike.com/product_info.php?products_id=26222)
that thing?
-
or this one?
http://www.amazon.com/Airsoft-Metal-Gear-Delayer-Sector/dp/B007FGUPKC/ref=sr_1_1?ie=UTF8&qid=1340153526&sr=8-1&keywords=shs+delayer+clip (http://www.amazon.com/Airsoft-Metal-Gear-Delayer-Sector/dp/B007FGUPKC/ref=sr_1_1?ie=UTF8&qid=1340153526&sr=8-1&keywords=shs+delayer+clip)
-
Either one will work.
-
Yes to both of those. They do the same thing.
-
or this one?
http://www.amazon.com/Airsoft-Metal-Gear-Delayer-Sector/dp/B007FGUPKC/ref=sr_1_1?ie=UTF8&qid=1340153526&sr=8-1&keywords=shs+delayer+clip (http://www.amazon.com/Airsoft-Metal-Gear-Delayer-Sector/dp/B007FGUPKC/ref=sr_1_1?ie=UTF8&qid=1340153526&sr=8-1&keywords=shs+delayer+clip)
i have this one made by shs for $3
but the first thing i want to know is it just that you dont think you have a solid stream of bb's coming out the end of your gun or as your fireing do you hear your gun studdering like its not feeding.
there is a different pitch to your gun when it dryfires as to when it fires a bb.
next thing to ask is if it feeds fine on semi or if it seems to studder there as well.
-
On full auto it sounds like is it is studdering and not feeding. Also ever since I put those new gears in it seems to be much louder idk why.
feeds fine on semi no problems
-
I would reshim the gears.