Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - spazz

Pages: [1] 2
1
Local Games Listing/RSVP / F.L.T.airsoft dynamic shooting challenge
« on: August 30, 2015, 01:03:35 PM »
hello everyone.

i am going to be hosting a shooting challenge.
this event will be held on the cqb field at fightertown.
it will be held on a sunday so that there is less interference with the game play.

there will be a cash prize for those over 18 yrs of age. and prizes for participants under the age of 18.

shooting senerio type will be 3 man teams, 2 rifleman/breachers and 1 dmr/sniper.
since there are no live targets there is also no fps restrictions.
if you intend to play at fightertown during the day at fightertown you will be required to adhere to fightertown's rules and regs to play on fightertown's fields.

rifleman/breachers will clear targets inside of the kill house buildings and the dmr/sniper will need to eliminate targets before rifleman/breachers will be allowed to move forward.

for now best time takes first prize of a minimum of $120 in cash/prizes.
cost per team is $30, the more teams to sign up the bigger the prizes. 90 percent of proceeds will be going towards prizes for the participants. i am going to be shooting a small demo video for an example of the senerio type so that you guys get a look at what you are looking at.

there are no age restrictions for this event.

i have a few things to work out but as of now this event is a go, i have recieved the ok from henry to host the event at his field.

input is also welcome but not all ideas will be used.

payment for participants will be updated as soon as i figure out how i plan to do it.

thank you for your time.

2
Local Games Listing/RSVP / shoot spazz day 3-15-15 at fightertown
« on: March 08, 2015, 02:45:38 PM »
hello everyone.

come out and celebrate my b-day with me out at fightertown next sunday, 3/15/15.
at least one game of the day will feature me doing a lonewolf game where it is me against everybody.

for an example of this game lets revisit the game i did last year.

https://www.youtube.com/watch?v=L6z5JUyG5W0

no rsvp required.

just show up to play.

3
Airsoft Items FOR SALE / btc spectre pre-order
« on: November 23, 2013, 03:22:34 PM »
Hello everyone.
Here today is another F.L.T.airsoft pre-order
Whats up for grabs today is the black talon concepts chimera mosfet for the
V2/V3 and the masada.
First off let me remind everyone that this is a pre-order I do not have units in hand, but I am an authorized dealer and my order has already been placed. I just have to wait for him to release the units on the website before I am able to receive them. That being said, I also don’t know how long it will be before btc releases the batch of chimera fets. It could be tomorrow it could be june. but if you pre-order with me you will receive your unit.
For those of you that don’t know me I go by spazz or spazzticsmurff on quite a few forums. I don’t have a bunch of positive reviews but I have zero negative reviews and my threads have been open for years and there has not been one person that hasn’t received a unit they paid for.
For the masada based chimera fet. Btc has been working on the board for this gun and has stated that he might be releasing it during this run. For anyone that places an order for this unit and it is not released or btc tells me that he is not going to release it this run, I will send a full refund.
Rules:
Paypal only, unless your local and bring me cash.
Units will not be reserved without full payment.
Cost is $110 shipped conus, international shipping and insurance is at the buyers expense.
Trades are not accepted, but may be considered if it something I am really interested in.
PAYMENT:
Payment can be made, via paypal, to: F.L.T.airsoft@gmail.com
Please include what you are purchasing, quantity, where you saw my add, your name there, and the correct shipping address if different than the shipping address associated with the paypal you are paying from.
For those of you that need to be reminded of what is for sale here:
http://www.btcairsoft.com/chimera_v2gb
http://www.btcairsoft.com/chimera_v3gb

4
Airsoft Items FOR SALE / shs internals and then some.
« on: July 10, 2013, 06:19:30 PM »
got some shs internals in today.
shs gears: $20 each
13:1 ratio
16:1 ratio
100:300 ratio
sr25 cnc gears

pistons: $10 each
15 steel teeth
sr25 19steel teeth
1 steel tooth w/piston head
ptw style piston for ptw/ctw/dtw platforms.

also have:

1. g&g umg. $250 this is a discontinued item in like new condition.
by all apearences this gun is bone stock, has tamiya connectors. everything in the pic comes with it in the original box, battery/charger not included. please purchase this one quickly as i am trying not to buy it for myself. i have tooooo many guns allready.

here is the slideshow link:
http://s1264.photobucket.com/user/fltairsoft/slideshow/guns%20for%20sale/vinces%20guns/g%20and%20g%20umg

2. k.a. ak74m body kit in black: $50
this kit is bnip, it has never been installed, not a skuff or scratch anywhere.


stuff i have but dont currently have pics for: can be texted for pics.

magazines:
m4: mid caps $5each, 8 black w/h&k trades (not sure of brand). 18 more gray/ish green, look to be mag brand.
9/ tokyo marui standard capacity metal mags w/ adventure line trades: $10each
6/ tokyo marui high cap mags w/ adventure line trades: $15each
4/ canadian style (i think) mags black, 2 mid/2 high cap: $5/$10each
1/ electric double stack high capacity mag (possibly battelaxe) $30
1/ ca electric cmag needs work $50 pm/call/text for more info.

other mags:
g&g umg high cap mags $20each
2/ warhead 9mm m4 conversion kits with 1 midcap each: $20each
9/ high cap uzi mags: $15each
2/ tokyo marui p90 high cap mags. $15each
10/ sig 552 mags 2low/5mid/3high cap $5/$5/$10each
1 g3 high cap: $15

also have g36, ak, and m4 parts to list but i want to take picks for them to make it easier to list.


5
Local Games Listing/RSVP / tempe paint ball 2/1/13
« on: January 27, 2013, 11:51:26 AM »
hello all.
i will be going to tempe paintball this friday the 1st of febuary to shoot some people.
come join me if you will. i will also have some steel plates and i am going to set up a timed shoot course, so that we have something new to do. fastest time of the night gets thier choice of a magpul rvg or afg 1/2 in black.
see you there.

please note that even though runs will be timed, it will be done with a stop watch and will not be super precise. also time will be added for missed shots.

6
Airsoft Items FOR SALE / BTC CHIMERA "preorder" closed
« on: October 15, 2012, 07:29:21 PM »
i have had the chance to show some of you the btc chimera fet that i have been beta testing. for those of you that havent here is my sneek peak vid:
btc chimera preview
i have 20 units avalible for preorder. they are $closed shipped or $closed if you come to me.
this is the same fet that i am running in my zombie killer cqb gun w/the hair trigger.
there have been some hardware and software changes, so they wont look exactly like in the video but the dimensions will be close if not the same.
here are a few pics.




7
BTC CHIMERA NOW IN STOCK AND AVALIBLE FOR PURCHASE: $110shipped or $105 if you come to me, meet me at a game im allready going to or someplace im going to allready.

i still have some shs stuff and will be updating stock as get it counted.
the  new parts are labeled "CORE"  not all the parts have labeled packaging, some stuff was sent to me in a bulk package.
ie: pinion gears and pistons, nozels, shims, and piston heads are in lil celophane baggies.
i am putting one pic that shows all the parts that i have currently and a link to the photobucket album so that you can look at the pics i took of the parts indavidualy.
paypal or cash is accepted. i dont intend to do any tradeing. doesnt meen i wont, but these companys dont take trades so its kinda hard for me to order more stuff if i dont have any money to do so because i traded all my stuff for your stuff.


SHS PARTS
FULL CYLINDER                        $10.00
gear set 32:1                          $20.00 must use half tooth piston
piston 15 half teeth                  $10.00 15 steel half teeth
AK long Nozzle                         $4.00 (x2 no oring)
MP5 Nozzle                             $4.00 (x4)
spring m110                            $5.00 (x1)
spring m150                            $5.00 (x1)
spring m170                            $7.00 (x4)
spring m190                            $8.00 (x3)
cnc cylinder unit                      $26.00 cylinder/head is machined out of a solid piece of stainless
cylinderhead ak                       $9.00 (x2)
cylinder head g36                    $9.00 (x4)
spring set v2                          $3.00 springs inside gb
spring set v3                          $3.00            "
spring set v7                          $3.00            "
cutoff lever v3                        $5.00 steel (x4)
bearing 8mm                           $8.00 (x3)
bearing 9mm                           $10.00 (x9)
sector chip                             $3.00 steel (x9)
tappet v3                               $5.00 (x7)
trigger switch v2                      $5.00 no wires (x1)
trigger switch v3                      $5.00 no wires (x2)
selector plate m4                     $5.00 (x2)
selector plate ak                      $5.00 no metal plate (x4)
selector plate g36                     $5.00 no metal plate (x3)
30teeth umbrella gear               $4.00  for aep (x1)
17teeth gear                           $4.00      "        "
double gears                           $4.00       "       "
long axis gear                          $4.00       "       "
saftey block v2                        $3.00 (x7)
Umbrella gear(With gear shee     $4.00 sinterd not cnc
spur gear                                $3.00           "
sector gear                             $4.00           "
                                                                               
super shooter parts:
m4 metal body                           $50.00 in stock (x1)
spring guide v3                          $10.00 bearing (x2)


got some acm magpul stuff for you guys. i got the afg1/2, rvg and pistol grip that holds the motor. got more pics in the album here if you want to see more views of them:flt-magpul price is $20 a piece, any color you want as long as its black.

dont have any of the pistol grips that hold the motor right now. still got the afg 1/2 and rvg though, and still only in black.

now for the new stuff:

link to album: http://photobucket.com/fltairsoft-core

CORE airsoft parts:
14 steel teeth pc piston: $13 (x7)
1 steel tooth pc piston: $8 (x21)
pom piston head w/bearing: $10 (x13)
gear set 18:1 ratio: $20 (x6)
gear set 16:1 ratio: $20 (x10)
gear set 13:1 ratio: $20 (x3)
pinion gear o-type: $6 (x15)
pinion gear d-type: $6 (x17)
shims: $3 (x4)
spring guide v2 bearing: $10 (x12)
spring guide v3 bearing: $10 (x5)
spring sp110: $5 (x3)
spring sp120: $5 (x14)
spring sp130: $5 (x15)
nozzel m4 double o-ring: $5 (x4)

8
Local Games Listing/RSVP / game on 12-26-11. hatfield or skunk creek?
« on: December 18, 2011, 08:50:34 PM »
ok guys. you know the drill.
same rules as always.
id like to play a game out at skunk creek since we havent done one out there in a while.
but its up to you guys.
for you guys that havent been out to skunk creek before, call/text me and ill give you directions.
i can be reached at 602-446-2280 thats my cell and im almost always avalible.

green:
spazz
thatguy
bambi
father of bambi
red devil
blackdragon
svtcobra
armyra
rubberup
gunny77

tan:
killerdragon
killerdragon guest
blackdragon21 guest1
blackdragon21 guest2
kosher

9
Airsoft Items FOR SALE / sr's mp5
« on: November 24, 2011, 02:53:00 AM »
i need to sell my step dads mp5 because he needs the money for rent.
because he needs the money for rent i will not be taking lowball offers.

i custom built this gun from the ground up.
it has a metal body, systema gears, ca piston, systema silent piston head set, systema stainless bushings, ca motor, ballbearing spring guide.
i will put any shs spring in it you want for free.
other parts in it can be changed upon request for an aditional fee.
this gun hasnt been used in years so i will be cleaning up the internals and regreasing it before i let it go.
the body shows some wear from use, it saw a lot of use.
this gun will be in perfect working condition before you recieve it.
my stepdad doesnt have a battery for the gun, but i can provide an 8.4 mini nimh for an extra $15
depending on the spring that you want installed an 8.4 mini might not  work for you.
1 high cap will be provided with the gun.

im looking to get $200 for it and i will warrenty it for 90 days.
it is the calapsable stock version.
feel free to send me offers if you want.
I WILL NOT BE TAKING TRADES.
he needs the money for rent otherwise id be buying it for myself, this gun has never failed in the field.
ill have pics up soon.

10
Airsoft Items FOR SALE / shs internals, pics added.
« on: November 22, 2011, 01:02:01 AM »
i have an abundance of shs internal gb parts for sale.
i will be posting pics as soon as i can.
i can do paypal.
some of this stuff will be avalible at gearbox the price here will be the same as the price there.
the difference is that im located in the west valley so we can meet closer if you live on this side and dont want to have to travel to tempe.
i will also offer a delivery service depending on how much you buy but most likely you will also be paying me gas money. unless you buy alot, then mabey ill just drive it out to you for free.
i dont intend to do any tradeing. doesnt meen i wont, but shs doesnt take trades so its kinda hard for me to order more stuff if i dont have any money to do so because i traded all my stuff for your stuff.

i can also install all parts, price depends on what you want done.

SHS PARTS
FULL CYLINDER                        $10.00
GEAR SET 13:1                         $20.00
GEAR SET 16:1                         $20.00
gear set 32:1                           $20.00 must use half tooth piston
PISTON 7 TEETH                       $8.00 7 steel teeth
PISTON 15 TEETH                     $10.00 15 steel teeth
piston 15 half teeth                 $10.00 15 steel half teeth
G36 Short Nozzel                     $4.00
AK short Nozzle                       $4.00
AK long Nozzle                         $4.00
M4 Nozzle                                $4.00 out of stock
MP5 Nozzle                              $4.00
spring m110                            $5.00
spring m120                            $5.00
spring m130                            $5.00
spring m150                            $5.00
spring m170                            $7.00
spring m190                            $8.00
pinion d-type                           $5.00
pinion o-type                           $5.00 press fit
cnc cylinder unit                       $26.00 cylinder/head is machined out of a solid piece of stainless
cylinder head m4                     $9.00
cylinderhead ak                       $9.00
cylinder head g36                    $9.00
spring set v2                           $3.00 springs inside gb
spring set v3                           $3.00            "
spring set v7                           $3.00            "
shims                                       $3.00
motor high torque long            $30.00 neo magnet
motor high speed long             $30.00 neo magnet
anti rev latch                            $4.00
cutoff lever v3                          $5.00 steel
cutoff lever v2                          $5.00 steel
bushing 6mm                           $4.00
bushing 7mm                           $4.00
bushing 8mm                           $4.00
bearing 8mm                            $8.00
bearing 9mm                            $10.00
sector chip                                $3.00 steel
tappet v2                                  $5.00
tappet v3                                  $5.00
trigger switch v2                       $5.00 no wires
trigger switch v3                       $5.00 no wires
selector plate m4                      $5.00
selector plate ak                       $5.00 no metal plate
selector plate g36                     $5.00 no metal plate
hop up bucking                          $5.00
30teeth umbrella gear               $4.00  for aep
17teeth gear                              $4.00      "
double gears                             $4.00       "
long axis gear                            $4.00       "
saftey block v2                           $3.00
Umbrella gear(With gear shee   $4.00 sinterd not cnc
spur gear                                   $3.00           "
sector gear                                $4.00           "
hopup m4 zinc                           $15.00 includes hopup rubber
                                                                               
super shooter parts:
m4 metal body                           $60.00 dont have yet but its on the way
spring guide v2                          $10.00 bearing
spring guide v3                          $10.00 bearing
piston head alum                       $8.00  bearing
hopup m4 cnc alum                    $30.00 body only, none of the plastic parts.
piston 15 teeth                          $15.00 clear blue polycarb, 15 steel teeth

this is a pic of the pistons, cylinderheads, cylinder, and nozzels.


these are shs aep gears for the marui/cyma g18c aep's


shs 13:1, 16:1, and 32:1 cnc gearsets.


super shooter cnc 7075 alum hopup unit. unfortunately what you see is what you get for now.


a new product from shs. its cylinder/head unit that is cnc machined from a solid piece of stainless steel.
there are pro and cons to this design.
pro: one less seal to have to worry about.
con: can be a pita to install and change buffer material.


                                                                                   

11
General Airsoft Discussion / starting a new tuning parts shop
« on: October 02, 2011, 10:11:37 PM »
most of the long time players and anyone that has played with me recently knows the perforemance of my guns. anyone that doesnt, i am willing to let them check them out
at any game i go to. i am starting a tuning/parts shop for airsoft. i have building guns for more than 10yrs. there are quite a few tech related advancements that have been made in the past few years. i will be offering a variety of services, from basic spring upgrades to full builds.

i will be stocking a wide range of parts from shs/supershooter.
they are quality parts at cheaper prices. im not gonna tell you that they are the best products out there but for the price they exceed their value.

i would also like imput for what shs/supershooter parts you would like to see avalible.
pistons are obvious, im allready buying a lot of them.
i will be stocking the shs full steel 15teeth and the super shooter clear blue polycarb pistons.

shs has a new 7075cast alum body that i will be ordering. they are black anodized and come with the supershooter logo. nothing i can do about the logo untill i can afford to buy 150units then i can get them without the logo.

im curious to know if there is any interest in the shs ftk's

as for gearsets i allready plan to order to order the 13:1 sets since high speed seems to be very popular right now and i will be getting some of the 32:1 as well as some stock ratio.
are there any other gearsets that you would like to see in stock?

im not sure if i will be carrying the supershooter polycarb tappet. i have seen at least 1 review where the spring catch broke off at high rof, if anyone has an opinion about this feel free to speak up. i will be carrying all the shs nylon tappets as well as their selector plates.

i will also stock the cylinder heads and cylinders and nozles
i am also going to stock their 1 piece stainless cnc cylinder unit (cylinder and head machined as 1 piece)

if there are any other items that you would like to se me stock feel free to speak up.

I WOULD PREFER ANY REPLIES FOR WHAT I SHOULD STOCK BE THROUGH PM AS THAT WILL BE THE BEST WAY TO ASSESS DEMAND. AND IT WILL HELP PREVENT THE THREAD FROM GETTING TO CROWDED. AT THIS TIME I ONLY WANT REPLYS THAT DEAL WITH SHS PARTS AS THIS IS WHAT MY FIRST ORDER IS GOING TO CONSIST OF. I WILL BE STOCKING OTHER BRANDS IN THE FUTURE BUT FOR NOW IT WILL BE JUST SHS/SUPERSHOOTER PARTS.

feel free to ask questions about my tech services in this thread. for basic work like spring upgrades my prices will pretty much the same as most other techs in the valley.
but i will be offering more advanced tech services for the disserning player. where reliability and performance are the main concern.

when i fully open the name of my shop will be:
F.L.T. field limit tuning
i chose that name because i have allways strove to achieve the maximum allowed performance out of my guns. as most of the long time players on here can atest my guns have almost always chronoed just under if not right on the leagle limit and have performed all day long with out a problem, even with a boxmag and a heavy trigger finger. i cant say ive never had a failure, no one can. but i strive to have them as far and few between as possible and most of those were because the parts just wore out over time.
my most reliabe guns that i have built are:

my tmp90: full build has had the same gears in it since 05 motor finaly burned out though. has a box mag and i cant even tell you how many rounds it has seen.

tm mp5a5: full build, this is the gun that i built for my step dad "sr" the worst thing i ever did was give him a box mag for that gun. when he saw somebody he would just hold that trigger down utill he hit the person. it is exactly that same as i built it in 03or04 the only thing i ever had to do was change a piston every once in a whie and regrease it. because of the way he played it has seen more rounds then my p90.

my tmg36: full build: built it in 04 and its exactly as i built it. i have only replaced 2 pistons and regreased it a few times. you can see the p90 and g36 at almost any game im at as well as several other guns that i have built.

thank you for your time and sorry for the novel.

12
Local Games Listing/RSVP / skunk creek 10-16-11
« on: October 02, 2011, 08:53:32 PM »
rules are the same as all other a.a. games
same with fps limits.
the field has good cover, lots of shrubs.
some trenches and fox holes dug.
game time will be from 8am till whenever we decide to stop.
bring water and some snacks.we do try to play all day.
pm or text/call: 602-446-2280 for location details.

13
Site Suggestions / local team listing
« on: September 14, 2011, 11:12:43 PM »
im thinking a spot where you can list your team and its members.
not a discussion thread but just a spot where your team and thier arms can be listed.
teams would have to edit thier own posting, edit your stuff instead of just makeing it run on to keep it short. we have quite a few good teams on here, but besides the lil tags in our signatures we have no way to rep our team.

14
General Airsoft Discussion / news on future scar sells
« on: August 29, 2011, 09:11:45 PM »
i copied the fallowing from airsoftmechanics, it was posted today by metallicafatcat.

Quoted from Spartan Imports:

August 11, 2011
Dear Spartan Authorized Dealer:
We wish to inform you of a situation that may or may not affect your Airsoft business. On July 19, 2011, FN Herstal was granted a design patent on the SCAR assault rifle (Design Patent number D641,284S) by the US Patent and Trademark Office. This means that the look of the SCAR is now a protected trade dress and may only be used exclusively by FN Herstal and its designated parties.

Additionally, given the SCARs protected design, the US Customs and Border Patrol is now legally entitled to seize any unauthorized imports of SCAR replica rifles, regardless of the markings on the gun.

Spartan Imports has previously sold the Classic Army SCAR/Mk16/Mk17. While Spartan Imports does not expect any action to be undertaken by FN Herstal on past sales, Spartan is concerned about existing advertising of the Classic Army SCAR and current inventories.

As such, Spartan Imports respectfully requests that in order to forestall any possible legal liability, your business remove any advertising in print or electronic form that shows the Classic Army SCAR. If your business has remaining inventory of new-in-box Classic Army SCARs, Spartan Imports will gladly accept return of these products for full credit or refund.

FN Herstal entered into an exclusive worldwide licensing agreement with Cybergun S.A. on June 25, 2010 for manufacture, distribution, sale, and intellectual property enforcement in the Airsoft, airgun, and paintball markets. As a member of the Cybergun group of companies, Spartan Imports will do its best to bring to you a selection of FN Airsoft replicas at competitive prices, including the reintroduction of the fully authorized Classic Army SCARs. We appreciate your understanding that with licensing royalties and increased overseas manufacturing costs, there may be significant increases in the prices of these goods.

-----------------------------------------------------------------------------------------------------------------------------------

Hope you all got your SCARs, not sure if other companies will be affected, but they probably will, except for maybe G&G who already has licensing.... I think...

saw this and thought it should be passed on.

15
Local Games Listing/RSVP / skunk creek a.o. 7/24/11
« on: July 18, 2011, 09:40:05 PM »
rules are the same as all other a.a. games
same with fps limits.
the field has good cover, lots of shrubs.
some trenches and fox holes dug.
game time will be from 8am till whenever we decide to stop.
its starting to get warmer outside, so please bring water and some snacks.
we do try to play all day.
pm or text/call: 602-446-2280 for location details.

Pages: [1] 2