« previous next »
Pages: [1] 2 3 4

Author Topic: Check Out the Gears!  (Read 4678 times)

Offline Ganef

  • Global Moderator
  • Trade Count: (0)
  • Major General
  • *****
  • Posts: 2103
    • View Profile
    • http://www.coyotetactical.blogspot.com/
Check Out the Gears!
« on: July 17, 2005, 11:42:43 AM »
Here are photos of some of my gear, and a few pices of gear that are not mine. I just finished making the helmet cover and had to suit up and show off the gears. so here they are:

Here is me in my CRYE field uniform with my TT MAV and SOTech bib, I have an Eagle RAID on my back, new CB alta knee pads, MICH copy with MC helmet cover, oakley M frames eyewear, Sordin supreme pros, and Hatch gloves holding my M4.



Me holding my own in Kurn's Kitchen:




Here is my M733 that matches my M4 but shoots way too hot to bring to games.  ;)





My new gear mascot...



Here is a close up of the helmet cover and what is underneith:







Here are the specs on the guns:

M4:
Guarder Aluminum Metal Body
Guarder Lightweight Outer Barrel
G&P Delta Ring Set
Systema Metal Bits
Guarder Metal Trigger
Magpul Enhanced Trigger Guard
classic army RIS foregrip
Tango Down Vertical Foregrip
G&P Enhanced Pistol Grip
Prometheus Selector Plate
Systema Hop Up
Guarder Hop Bucking
OK 6.03mm Tight Bore Barrel
9.6V 2500mah NIMH Batteries
K2 Metal Pin Set
PDI170 Spring
Guarder Piston
Systema Piston Head
Systema Oiless Bushings
Magpul XT Rail Covers
Vltor Clubfoot Modstock
ITS AN/PEQ2A
EOTech 511

M733:
Colt Upper off my SP1
Colt Hbar Lower
Tango Down Battlegrip
Cav Arms Foregrip
EOTech 511
Vltor Stock tube
Vltor Clubfoot Modstock
« Last Edit: December 31, 1969, 05:00:00 PM by Ganef »
Logged
"Well, ain\'t we a pair, Raggedy Man..."

Offline Firehead

  • Trade Count: (0)
  • Major General
  • *****
  • Posts: 2441
    • View Profile
(No subject)
« Reply #1 on: July 17, 2005, 11:44:12 AM »
Very nice. But...get rid of the frikkin running shoes!
« Last Edit: December 31, 1969, 05:00:00 PM by Firehead »
Logged

Offline Ganef

  • Global Moderator
  • Trade Count: (0)
  • Major General
  • *****
  • Posts: 2103
    • View Profile
    • http://www.coyotetactical.blogspot.com/
(No subject)
« Reply #2 on: July 17, 2005, 11:45:22 AM »
My welcos were a bit dirty from work, I plan to take a pair and remake them using multicam cordura.
« Last Edit: December 31, 1969, 05:00:00 PM by Ganef »
Logged
"Well, ain\'t we a pair, Raggedy Man..."

Offline studdermonkey

  • Trade Count: (0)
  • Brigadier General
  • *****
  • Posts: 1733
    • View Profile
(No subject)
« Reply #3 on: July 17, 2005, 11:54:24 AM »
Ok, just because I'm jealous, you're not gettin' your fabric! Sick shit, man.. Can't wait to see it at the games. Are you gonna wear the helmet at standard games?

I just got those same kneepads in yesterday. They work ok with multicam, I see. Thanks for the test pic! :-P And, damnit, the velcro on the pockets are there to use! Slap the LC4 patch there, if it's a last resort!

Also, your pictures are a pretty good example how you don't need all your gear to be multicam to blend in. I could hardly tell what was MC and what wasn't, till I took a good look.

Can't wait to take a closer look next game.

Edit: Ok, everyone that I've seen with the Crye field set didn't order the kneepads. Dave (Gixer), I heard your Multicam will be here/is here. Did you order kneepads? And is there something I don't know? Why does no-one want the Crye kneepads?

Sorry if it seems a bit off topic.
« Last Edit: December 31, 1969, 05:00:00 PM by studdermonkey »
Logged
كافر
Nate!

Offline Greg

  • Trade Count: (0)
  • Colonel
  • *****
  • Posts: 1381
    • View Profile
(No subject)
« Reply #4 on: July 17, 2005, 12:26:41 PM »
Very nice kit.  [smilie=armata_pdt_34.gif]
Is ralph permanent on the helmet cover?

I gots to get me some of dem CB alta's.
« Last Edit: December 31, 1969, 05:00:00 PM by Greg »
Logged
-Greg of Christian\'s Team

Offline Vince

  • Global Moderator
  • Trade Count: (0)
  • General
  • *****
  • Posts: 5230
    • View Profile
(No subject)
« Reply #5 on: July 17, 2005, 12:50:27 PM »
Ha, someone else who wears HSLD shoes.
« Last Edit: December 31, 1969, 05:00:00 PM by Vince »
Logged


"I was having dinner with Andrew Ho, and he said I should have COL McKnight lead airsofters in mock combat. I said, "That is the gayest idea I have ever heard." - John Lu

Offline gixser13

  • Trade Count: (0)
  • Major General
  • *****
  • Posts: 2221
    • View Profile
(No subject)
« Reply #6 on: July 17, 2005, 01:02:21 PM »
Way sweet man! Your the Versachi of airsoft!!!
« Last Edit: December 31, 1969, 05:00:00 PM by gixser13 »
Logged

Offline yellowmonkey

  • Trade Count: (0)
  • Sergeant Major
  • *****
  • Posts: 608
    • View Profile
    • http://www.ratemykitten.com
(No subject)
« Reply #7 on: July 17, 2005, 01:14:53 PM »
I'm feeling primitive with my fake MARPAT. Very snazzy!

What did you pay for all the multicam stuff, or did you make your uniform?
« Last Edit: December 31, 1969, 05:00:00 PM by yellowmonkey »
Logged
It\'s time to kick *** and chew bubblegum, and I\'m all outa\' bubblegum. -Duke Nukem

Let\'s just be friends. -My Ex-girlfriend

Offline chainsaw

  • Trade Count: (0)
  • Second Lieutenant
  • *****
  • Posts: 817
    • View Profile
    • http://amsog.com
(No subject)
« Reply #8 on: July 17, 2005, 01:17:44 PM »
Nice camo on the gun! I really love it.
« Last Edit: December 31, 1969, 05:00:00 PM by chainsaw »
Logged

Offline Ganef

  • Global Moderator
  • Trade Count: (0)
  • Major General
  • *****
  • Posts: 2103
    • View Profile
    • http://www.coyotetactical.blogspot.com/
(No subject)
« Reply #9 on: July 17, 2005, 01:21:15 PM »
Studder the helmet and cover are not mine, I just had to sport them for fun since I finished the cover. Do not worry about my pices of flair I had 8 and two of them were IR flags, but you are right I should have filled up every loop with signage. As for knee pads, I am still trying different things. Also the Raid is CB and so is my rig, the mag puches from Emdom (EMODEMOE) are MC. I will be making a MC rig soon enough... so prepare yourself.

Greg, the Ralph is velcro backed. The CB altas do look strange in different light so check them out at a game before purchase.

YellowMK, The Uniform is from Crye costing a little over $200 the helmet cover was made by me.
« Last Edit: December 31, 1969, 05:00:00 PM by Ganef »
Logged
"Well, ain\'t we a pair, Raggedy Man..."

Offline busta_cap

  • Trade Count: (0)
  • Lieutenant General
  • *****
  • Posts: 3887
    • View Profile
(No subject)
« Reply #10 on: July 17, 2005, 01:30:43 PM »
Quote from: "Ganef"
Studder the helmet and cover are not mine, I just had to sport them for fun since I finished the cover. Do not worry about my pices of flair I had 8 and two of them were IR flags, but you are right I should have filled up every loop with signage. As for knee pads, I am still trying different things. Also the Raid is CB and so is my rig, the mag puches from Emdom (EMODEMOE) are MC. I will be making a MC rig soon enough... so prepare yourself.

Greg, the Ralph is velcro backed. The CB altas do look strange in different light so check them out at a game before purchase.

YellowMK, The Uniform is from Crye costing a little over $200 the helmet cover was made by me.
David, isn't the ENDOM the FUGLY line of pouches? either way, they are appropriately named. Good work though, did you hand stitch or use a machine? It's really cool that there are as many guys sewing stuff here in AZ that there are..and producing such awesome work..I know there are only a few but it seems like every time the work gets so much better. Keep it up, David and Nate. If either of you want to sew me and Benn a little project let me know Ill be glad to pay you guys...hell..MC would be the perfect fabric for it too..
« Last Edit: December 31, 1969, 05:00:00 PM by busta_cap »
Logged

Offline Greg

  • Trade Count: (0)
  • Colonel
  • *****
  • Posts: 1381
    • View Profile
(No subject)
« Reply #11 on: July 17, 2005, 02:34:30 PM »
FUGLYs are made by Extreme Gear Labs.
« Last Edit: December 31, 1969, 05:00:00 PM by Greg »
Logged
-Greg of Christian\'s Team

Offline studdermonkey

  • Trade Count: (0)
  • Brigadier General
  • *****
  • Posts: 1733
    • View Profile
(No subject)
« Reply #12 on: July 17, 2005, 04:01:22 PM »
Quote from: "busta_cap"
Quote from: "Ganef"
Studder the helmet and cover are not mine, I just had to sport them for fun since I finished the cover. Do not worry about my pices of flair I had 8 and two of them were IR flags, but you are right I should have filled up every loop with signage. As for knee pads, I am still trying different things. Also the Raid is CB and so is my rig, the mag puches from Emdom (EMODEMOE) are MC. I will be making a MC rig soon enough... so prepare yourself.

Greg, the Ralph is velcro backed. The CB altas do look strange in different light so check them out at a game before purchase.

YellowMK, The Uniform is from Crye costing a little over $200 the helmet cover was made by me.
David, isn't the ENDOM the FUGLY line of pouches? either way, they are appropriately named. Good work though, did you hand stitch or use a machine? It's really cool that there are as many guys sewing stuff here in AZ that there are..and producing such awesome work..I know there are only a few but it seems like every time the work gets so much better. Keep it up, David and Nate. If either of you want to sew me and Benn a little project let me know Ill be glad to pay you guys...hell..MC would be the perfect fabric for it too..


He has a new industrial, if I understand him right. And, I thought that helmet cover was made by a pro, and modified by you! That's frickin sweet, man!

And Andy, those Emdom pouches are sick. Theres no way they're "fuglyness" should be considered as giving them a bad reputation. And, the Fugly pouches, like Greg said, are Eggs line of admin pouches.

You painted the helmet, I gather? It looks cool, like you were painting it MultiCam and decided to do some other design as well, like fire. Very cool.
« Last Edit: December 31, 1969, 05:00:00 PM by studdermonkey »
Logged
كافر
Nate!

Offline Ganef

  • Global Moderator
  • Trade Count: (0)
  • Major General
  • *****
  • Posts: 2103
    • View Profile
    • http://www.coyotetactical.blogspot.com/
(No subject)
« Reply #13 on: July 17, 2005, 05:02:29 PM »
Emdom USA: http://stores.skipjack.com/emdomusa/StoreFront.bok

No, they are not EGL, nor do either carry eithers gear.

I still have not recieved my industrial machine yet, but when I do the gears shall flow like water. I made the helmet cover from scratch, it took a lot of thinking and prepatory design work, and many minutes of staring at MM. I used my home machine to sew it and I have kept all the patterns. I forgot to mention that the lower part of the pocket is velcroed to the helmet so you can pass a goggle strap behind the pocket. I went off the Crye precision helmet cover but made some modifications.

Busta, just search ENDOM you will only get a$$.
« Last Edit: December 31, 1969, 05:00:00 PM by Ganef »
Logged
"Well, ain\'t we a pair, Raggedy Man..."

Offline Airsofter1

  • Global Moderator
  • Trade Count: (+1)
  • Major General
  • *****
  • Posts: 2511
    • View Profile
    • airsot airsona
(No subject)
« Reply #14 on: July 17, 2005, 05:33:00 PM »
Looking good David!
« Last Edit: December 31, 1969, 05:00:00 PM by Airsofter1 »
Logged
Pages: [1] 2 3 4
« previous next »