Limited room on my SAW RIS has me looking at gripods. Are they worth it? Hearing a lot of complaints even with the authentic steel reinforced legs.

Hi there! I'm looking to sell some of my airsoft replicas and M4 parts I've acquired over the years. My prices are non-negotiable unless noted otherwise. Photos and other updates will be posted when I get a chance later this week. I am not on here often so please text at 602-820-4972 for fastest response. No phone calls, I'm typically very busy. CASH ONLY. I have too much crap as is.

CA M14 - $150
-Bravo Tightbore barrel
-New Airnozzle
-New Piston w/second tooth cut (CYMA or Element, can't remember, both are excellent)
-New Cylinder Head with sorbo pad for proper AoE (sorbo pad cuts are a bit rough as done by hand but hold up just fine)
-New paintjob done over previous owner's poor OD w/leaf. Its a dull blend of greens and tans. I did use standard paints so a small reflection may be noticed as is on most stock AEGs
-New hop up rubber (either G&G or Systema, can't remember)
-Some marks in paint from light use
-Stock motor
-Sp110-ish spring
-Metal spring guide (I believe bearing, but I can't remember)
-Marks on section in front of rear sight from attempts to cut a piece off to mount a scope mount, mine didn't fit, but normal non TM mounts will work on this
-Deans connector
-Battery will be on hand for testing but not included (unfortunately barely have enough for myself)
-Will come with OD M14 three-point sling if I can locate it.

ICS L85A2 - $500
-All stock parts internally with exception of a deans connector, systema hop up rubber, home-made sorbo pad, AoE adjusted piston, sp120 spring, and CA 510mm barrel
-Stock parts are super high torque motor, adjustable bearing spring guide, 8mm steel bushings, new style electric switch to reduce arcing, steel gear set (very well shimmed), and quick-take down to access gearbox. Probably the easiest gun to work on ever.
-ACOG w/British Z-style mount replica and I'll throw in the iron sights and STAR Weaver mount for anything else you want
-Madbull R.I.S. sleeve w/REAL Magpul AFG grip, OD rail covers, and Lipo 7.2v 1800mAh PEQ box battery (comparable to large type 8.4v NiMH) wired for deans
-Adjustable three-point sling in OD
-Five 120-150 MAG midcaps as those are the only mags this gun really likes. Your choice of black or Tan.
-Stock fat OD handguard since I obviously would have no need for it.
-Seen roughly 50,000 cycles or less and frequent inspection of internals for wear and cleaning. The piston and gears are still going strong as are the rest of the internals.
-Externals look great with some minor wear on the butt plate and minor scratches across the gun and such

Just the gun, Rail System, and rail system adapter go for a little over 500 on airsoftgi! I'm also including sling, grip, rail protectors, battery, and optic accessories on top of that! Not to mention I've already endured all the trouble of mounting everything and tracking it down across the web! You will NOT find a better deal for a pimped out L85A2! I'm still hesitant to sell it.

Echo 1 M28 - $80
-Bone stock (which is actually very good) Excellent deal for anybody looking to try their hand at sniping. Mine doesn't seem to suffer from the feeding issues most people have. Includes two mags.

CYMA Thompson -$80
-Stock except for a few things listed below
-Re-shimmed, cleaned, wired to deans, G&G hop up rubber, Tokyo Marui piston, piston head, and an echo1 350fps spring
-Also I broked the tabs on the hop up unit, so it is currently head against the gearbox with some springs. I actually think this is more of a benefit as it likely improves the compression
-I got this just for loaning to people. Comes with two hi cap magazines.
-Also includes a very mediocre leather sling that gives it that cool WW2ish look. Sling is next to useless and purely for cosmetic use.
-DOES NOT INCLUDE SAFETY. The Safety pieces broke when I opened it. This is the biggest reason as to why this is so cheap. I doubt replacement parts would be hard to come by but please keep this in mind!

*M4 parts and photos will be edited in at a later time*

Looking for a CA/A&K style SR25. Price will vary obviously on what you have to offer but at the bare minimum I want all the externals, hop up unit, and gearbox shell, preferably with an intact gear set.

I'd prefer a model without the suppressor, however all offers will be considered. FYI, I can get one brand new for $225 so if you want more than that, please look elsewhere.

For a M249, I'd prefer it to have the gearbox shell, wiring, hop up unit, all externals, and a box mag. I can get one new for $260ish so again, if you'd like more, please look elsewhere.

I don't care about paint jobs, it'll just give me an excuse to add my own.

The only trade items I have are an echo 1 m28, m14 parts, and m4 parts. Anything you need when it comes to those.

$60 takes everything
$50 without barrel
$20 for the barrel alone



I have been meaning to get rid of this for some time and have never really gotten around to it. Its an old (about six years) Tippmann 98 Custom. Probably seen less than 2,000 cycles through it and its been to only three games.

The only issues it has at all are a worn screw or two and a chip on the cover to the hopper from a stray round taking it right off (neither affect performance in anyway). It saw a game last year with my cousin and still works just fine (I have taken care to lube it once every year).





I would offer the Co2 tank, however it is expired although I will included the barrel condom, and Co2 tank shoulder pad/stock in addition to the marker itself.

I also will sell anyone who purchases this my flat line barrel for only an additional 10 dollars. It also works fine and has no issues aside from some paint chipped off the screw for the barrel adapter as you have to use some force to get it to sit correctly.





This is a nice little Paintball Marker. I highly recommend it for anyone who wants to just play casually. The flat line barrel basically gives your paintballs 'hop up' style backspin and out ranges any other barrel on the market at the sacrifice of accuracy.

Thank you!

PM, or E-mail me at [email:2losrjfl]alexandertomkins@yahoo.com[/email:2losrjfl] or call/text me at 602-820-4972 for offers.

TM VSR Scope Rail - $5

*Rear reciever w/iron Sights and w/o Trigger Unit - $10 w/Trigger Unit - $15 w/Scope Rail and Trigger Unit - $17

Trigger unit - $10

Smooth Finished cylinder with some scratches (creates a very smooth pull back) and bolt assembly which has been repainted - $20 or $30 with the stock internals all of which are in great condition except the spring guide is a slightly warped.

Stock Aluminum Inner Barrel 430mm (Fits Pro VSRs, will go past the outer barrel and into the supressor on G-Specs) - $5

VSR Outer Barrel (Pro NOT G-Spec) with new Matte Black Paintjob and is in Used Condition with scratches present under the paint and the flash hider and front sight are super glued in place - $15

VSR Rifle Stock in Heavily Used condition** - $15

BRAND NEW Only been shot through about 30 bbs AIRSOFTGI Tightbore 6.03 430mm stainless steel barrel - $20

HFC USR 11 Hop Up Chamber -$10 This chamber has all the parts and works, however I would like to caution that this will need modification as I have never been able to get this chamber to achieve decent hop up on my bbs. If you buy this, you buy it knowing that you will need to likely modify the chamber and/or modify other parts to achieve more pressure.


*Note: I will include the Iron Sights with the scope rail and reciever package
**Note: New textured black paint job and the front piece which bipods attaches to was too weak and is now broken. Also I had to carve out the second body screw area to fit a new body screw. This stock is specific to the HFC USR magazines and I cannot garuntee compatibility with other brands. I am including the magazine with this stock as I obviously cannot sell it without the stock. It holds roughly 25 rounds and is in great condition.

Photos will be up soon.

Please PM me when and where you'd like to meet. I will not be avaliable to meet anywhere until July 4th. My Number for contact is 602-820-4972. Feel free to PM me for questions or if you prefer, I have plenty of mintues and unlimited texting on my phone.

Anyone know where I can get a custom tag which would take the place of the 'U.S. Marines' tag usually found above the chest pocket on a MARPAT uniform and/or where I can get name tags from?

Thanks.

Ok, I just picked up a CA SLR 105 Para from The Gearbox (great store, great service, couldn't ask from more, keep it up you guys!), and I happened to assume that my cousin's Elite and/or Intellect stick batteries would fit into the replica.  Well, I guess the cells are too large or something, because no matter how hard I try they won't seem to fit.  They are only 8.4v and 1400mAh/1500mAh.  I'm looking for something that will fit, and I'm assuming I'm going to have to look for even lower mAh batteries like 8.4v 1000/1100mAh batteries.  However, the only ones I can seem to find are the KANs which I've had very bad past experience with.

Can anybody point me in the direction of a higher quality brand stick battery that would fit a folding stock model such as this? :?

Thank you!