Airsoft Arizona
Airsoft Hardware => AEG's => Topic started by: extremist on February 27, 2007, 03:20:59 PM
-
name your dream gun like you would like so and so if... and ect.
-
ca m4
ris
m203
m16 precision barrel
ca one touch silencer
bipod
full systema gearbox
acog
9.6v 6000 mah battery
drum mag
hi torque motor
or a
classic army saw
-
Asahi WA2000 or m40 w/ blade bb's.
-
Asahi WA2000 or m40 w/ blade bb's.
The holy grail... One is for sale on ClassicAirsoft.net btw...
Mine would be an Escort M60 or RPK :D As much as I'd want an asahi M40/WA2000, they'd be more for show and hang on the wall, I'd want something that (when I can play) I can use without fear of damaging it.
-
Hk-21e
Hk-G11 with the same rate of fire as the real one. :p
-
I'd take a PKM... :twisted:
-
Asahi WA2000 or m40 w/ blade bb's.
The holy grail... One is for sale on ClassicAirsoft.net btw...
I would love either of them, but I don't want to pay the prices they demand. lol
-
a m60 vietnam style if it would fit me with if ever possible a bb string or belt fed or a tm m14 all wood body [smilie=armata_pdt_34.gif]
-
I'd love to have a fully automatic belt fed nuke lanucher....just kidding.
CA M15a4 CQB
M120 spring
EOTECH Holosight
Madbull V2 precision barrel M4A1 length
M4A1 outer barrel
9.6v 3000mah battery
M4 rail mag
-
The one I have...M4 CQBR... :P
-
F2000 with grenade launcher. What more needs to be said?
-
Prime Crane Stock
Prime Buffer Tube
G&P Sling Adapter Type 2
Guarder Flip-Up Rear Sight
G&P SR25 Metal Receiver for M4 / M16 Series
Hogue grips
K2 Receiver Pin Set
EOTech 512
Midwest Industries Carbine Length Free Float Forearm (real steel RAS)
TangoDown BattleGrip or
RICO 9 Alpha 250 Lumen Tac Light
K.A. PRI Flip-Up Front Sight
KA Troy flash hider
G&P M203 w/ 8 KA King shells
Internal:
6MilSpec Gear Box with 8mm Bearing Bushings (CNC'd of milspec aluminum)
-Ceramic reinforced SERIES-L 8mm bearings
-Prometheus Spring Guide with Bearings
-PDI 170% Spring
-Prometheus Polycarb Piston
-Systema Bore-Up Cylinder
-Systema Bore-Up Cylinder Head
-Systema Bore-Up Piston Head
-Systema Bore-Up Nozzle
-Area 1000 Tappet Plate
-Prometheus Torque Gears (Standard Ratio)
-Prometheus Shims
-Prometheus Anti-Reversal Latch
-Systema Low Resistance Switch Assembly, bridged
-Systema Selector Plate
-Systema Cut Off Lever
-Guarder Safty Cover/Latch
-Systema Spring and Screw Set
-Guarder Gearbox Spring Set
-Systema Magnum motor
-IRF3703 MOSFET
-Deans Connectors
-10.8v 4200mah Ni-Mh, Intellect Cells
KM 6.04mm Tightbore Barrel, 363mm
First Factory Hop-Up
First Factory Strike Chamber
Prometheus Soft Bucking
KM Hard Nub
-
christ thats a long list.. lol i'm dying to get a real class 3 m4, trijicon..
s-rail... etc. as far as airsoft though, my cqb seals is bueno
-
Something that shoots as far as it's firearm counterpart.
-
Something that shoots as far as it's firearm counterpart.
HAHAHAHA! Oh Vince, you do have imagination.
-
vfc hk416 w/
crane stock
and eotech
-
hell MG36,
CA M249 MKII W/ Eotech
M14 DMR
RPK (metal and wood)
L86A2
Inokatsu M60A1
Vulcan
Mini Gun
yea i like big guns
-
A TM M14 Sopmod.
-
Escort M60 or an Inokatsu m60 does not realy matter to me.
Sorry But, I also like WWII Guns MP44 Made by Inokatsu would kick butt also if marui could make a MP40. May not be possible. but if some one could make a G43 gas powered that worked great sweet.
-
M101 105mm Mobile Howitzer (Firing foam rockets dummies :P) It needs shell ejecting and needs to be able to be disassembled and fit in the back of my one of my teammates' pickups. It should also probably use a cheap resupplyable source. If it can also recoil like the real thing, all the better :) Ohh wait... this isnt that far off, just short of monehs :P
For AEG's
G&G M14 upgraded to 500 FPS and Semi Only. Tightbore and reliability fixes, Magnum Motor Madbul Shark Accelerator.
WGC Custom m16A3 w/ M203 and heatshield
Gas
Escort M60 VN w/ blade trigger and tripod Long belt of ammo :)
Barret M82 that doesnt cost an arm and a leg and is reliable.
-
A TM or CA BAR. For a reasonable price.
-
Something that shoots as far as it's firearm counterpart.
Yeah, +1. You're right, an airsoft Hi-Point would be cool.
-
Something that shoots as far as it's firearm counterpart.
Yeah, +1. You're right, an airsoft Hi-Point would be cool.
+2!!1 but it would have to be under 50 bux for me to want it
-
Something that shoots as far as it's firearm counterpart.
Yeah, +1. You're right, an airsoft Hi-Point would be cool.
+2!!1 but it would have to be under 50 bux for me to want it
Let's get some Hipoints and some High Standard BUGs. We can do a Saturday Night Special rush at LCVI, and if they stovepipe, fix fuckin' bayonets. It'll be cool on a 7th Ave and Jefferson level. We just throw everything away when we're done.
-
MK-19 vehicle mounted belt-fed grenade launcher capable of firing both regular gas shells, nerf footballs, & smoke or illumination rounds.
or possibly a flamethrower that just shoots a shower of BB's in one general direction.
-
Whoa, belt-fed howlers, now you are on to something...
-
Something that shoots as far as it's firearm counterpart.
AND as accurately.
-
Something that shoots as far as it's firearm counterpart.
AND as accurately.
And won't kill you when you get hit.
-
Something that shoots as far as it's firearm counterpart.
AND as accurately.
And won't kill you when you get hit.
I have a really great analgoy for this situation, but I feel that it's inappropiate 8)
I would like to see a GBB put in to production that is entirely made of titanium.
I'm sick of all this wear and tear.
-Brian
-
I would like to see a GBB put in to production that is entirely made of titanium.
I'm sick of all this wear and tear.
-Brian
It would be nothing without a good finish.
-
SUPER 9 RIFLE!!
or
Inukatsu M60/Mk46
-
something that fires like its real steel counterpart, AND never breaks....ever... it should also have a genie in it.. who grants unlumited wishes...and stuff
-
something that fires like its real steel counterpart, AND never breaks....ever... it should also have a genie in it.. who grants unlumited wishes...and stuff
And a hot girl that comes out whenever you're lonely.
-
gats:
HK 21
MK 48
M240B
SCAR H CQC
M320
DsHk (for the HiLux)
accessories:
ATILLA
IZLID
New collapsible RFI buttstock for M249, Mk46
And M4 magazines that are the same dimensions as the real thing, which would likely require a new type of AEG.
-
And M4 magazines that are the same dimensions as the real thing, which would likely require a new type of AEG.
Or the Systema PTW.
-
And M4 magazines that are the same dimensions as the real thing, which would likely require a new type of AEG.
Or the Systema PTW.
More realistic than that.
-
something that fires like its real steel counterpart, AND never breaks....ever... it should also have a genie in it.. who grants unlumited wishes...and stuff
And a hot girl that comes out whenever you're lonely.
a hot gurl genie would sum it up....
-
something that fires like its real steel counterpart, AND never breaks....ever... it should also have a genie in it.. who grants unlumited wishes...and stuff
And a hot girl that comes out whenever you're lonely.
a hot gurl genie would sum it up....
(http://www.celebritywar.com/pictures/barbara-eden.jpg)
-
mmmmm das wut ahhm tahkin 'bout
-
M82A1 .50 Cal Semi Auto Sniper Rilfe... *drools*
-
I would like to see a GBB put in to production that is entirely made of titanium.
I'm sick of all this wear and tear.
-Brian
It would be nothing without a good finish.
True that.
It would never happen, but one can hope.
-Brian
-
top m60 seals
50 cal sniper
M249 saw
CAW 6 shot grenade launcher w/ sum small mad bull launchers
and of course a hot chick that pops out of it
-
TAVOR i want a TAVOR
-
I'd like to see an AEG with a blow-back system that actually WORKS. Weapon recoil is just one of those things that I think airsoft needs... but at the same time I have no desire to buy a classic.
-BATMAN
-
Right now, I'd just be happy with a gun that always works and requires no maintenance, even if it looks like cow crap.
-
Is it impossible to have a light gun that looks like the M15A4 Seal edition? I just purchased this gun but I am afraid of it being too heavy because of the full metal body.... :/
-
First off, if you want a light gun, you're in the wrong hobby. Though if you want a light gun you could try an MP7.
-
P90 is about the lightest gun I have used an myself and a few others on here are quite aware of how ridiculous you can get them shooting. I liked my MP7 as well, but not much in the way of parts at this time.
-
it feels like close to the way a gun aoght to feel with all metal construction imo
-
i could use an M249 :D
-
I wanted some light like a famas but have the looks of my gun.
-
it would be a m1 grand gas powered.
-
i would like uhca1 huey or little bird out fitted with 2-4 mini guns on each side [smilie=armata_pdt_40.gif]
-
The rotor wash would eliminate any usefulness of the airsoftguns.
I want one too though, it would make a great entrance for LC.
-
a BAR would be amazing. Provided it was real wood, all metal, etc.
-
FNH M3M, Or a blawkhawk with 2 mini guns for show, and of course a m1a2 Tank with a airsoft m2.
-
forget the tank, just hand me the m2 to go have some fun with. :twisted:
-
what ever gun my 4 year old son pretends to have when he is in pretend combat. It must be massive because of the amount of spit that comes out of his mouth when he shoots. ;)
-
haha that's cute :)
-
I want an RPK-74. And it has to look worn and dirty.
+plummed plastic furniture
+several normal-capacity '74-style mags, also plummed
I also dreamt up and drew up plans for a little contraption that fits in the receiver cover of AK models that can simulate recoil... it'd be cool if that became a reality. I like the recoil effect. I don't have money or time to invest into some little project that's likely to fail like this, though.
And I'd consider a 1x or 1.5x magnified optic, although I prefer my AKs bare.
-
m14 400FPS
supresser
FATY scope
bipod
idk what else
just a gun that can hit and reach
-
Tera is my dream gun, cant make it anymore cus apparently they dont make the thumb stock anywhere anymore... see her stats and drool http://www.epowersportsllc.com/images/tera002.jpg (http://www.epowersportsllc.com/images/tera002.jpg)
and where shes made http://www.epowersportsllc.com/tera.html (http://www.epowersportsllc.com/tera.html)
-
http://www.wgcshop.com/pcart/shopper.php?itm=RG-ST-16SS_cat_Stocks
That said, not really sure what the appeal in it is...
-
If you have an M203, you have to get that stock, otherwise your gun will break in half. :lol:
-
ok my ideal gun is if it breaks it fixes and reshims itself..... to idealistic, maybe in 10 years.....;)
-
My favorite gun is one that has such a perfect fit that it needs no shims.... O wait... Echo 1.
Ok, then... ! A gun that outshoots and outpowers a stock CA or TM for half the price!... O ya... Echo again.
Dang.... Well, I'm set :D
-
http://www.wgcshop.com/pcart/shopper.php?itm=RG-ST-16SS_cat_Stocks
That said, not really sure what the appeal in it is...
DUDE thank you so much! (the appeal is purely aesthetic for me im a huge fan of sniper rifles and all my guns have had the thumb grip so its just something im use too!)
Damn thats expensive though but thanks!
-
i want a Barrett that shoots 600FPS! and has a 100X60 scope/red dot, with an m203 and a tripod. its also got to have a laser sight, and a peq box and a flashlight, and drum mag!!!!11one.........ok for reals, i would like a nice AK with wood furnish, and tuned up a bit. i don't need nothing fancy something simple, light, and dependable. so either that or a SCAR with for grip and an optic, again tuned a bit.
-
I got a scar for sale Twitchy, been upgraded....:D
-
Right now, a 249 SAW that will never break both internally and externally.
-
http://www.wgcshop.com/pcart/shopper.php?itm=RG-ST-16SS_cat_Stocks
That said, not really sure what the appeal in it is...
DUDE thank you so much! (the appeal is purely aesthetic for me im a huge fan of sniper rifles and all my guns have had the thumb grip so its just something im use too!)
Damn thats expensive though but thanks!
I love that type of stock as well, I am in agreement, thanks for that post, and long live all SL8, Dragunav, and M16 sniper stocks. :D
-
http://www.wgcshop.com/pcart/shopper.php?itm=RG-ST-16SS_cat_Stocks
That said, not really sure what the appeal in it is...
DUDE thank you so much! (the appeal is purely aesthetic for me im a huge fan of sniper rifles and all my guns have had the thumb grip so its just something im use too!)
Damn thats expensive though but thanks!
I love that type of stock as well, I am in agreement, thanks for that post, and long live all SL8, Dragunav, and M16 sniper stocks. :D
hell yes you my man!!! freaking love the sl-8!!!! i was really debating whether to buy that or a m16 that i could just upgrade a shit ton with that stock and other stuff. Finally settled on the m16 just cus i could tweak it to just how i like for not as much. Considering to get a rail on an sl8 is like freaking two hundred bucks for a good lookin one
-
I got a scar for sale Twitchy, been upgraded....:D
well first i'm looking at the VFC, not the CA. and well maybe, idk, i'm waiting for my tax return.
-
Something that shoots as far as it's firearm counterpart.
AND as accurately.
A little late on this one, but they might be able to match the accuracy and range as a Micro Usi on full-auto :)
-
my dream AEG would be real VLTOR lower and upper (with intergrated rail) receivers ground out to fit Systema PTW internals. add a Magpul MIAD grip and UBR stock too.
then slap an ACOG TA01 or an EOTech 557 on it and call it a day.
I would never build this gun tho unless I was extremely wealthy because if I bought any of those parts I'd rather just use them for my AR 8)
-
A kalashnikov lovingly crafted by the man himself, sanctified by Chuck Norris, and passed through the hands of the gun gods, capable of everything the real steel can do (minus the killing bit. quite messy).
-
M4 with SOPMOD kit w/ grenede launcher, silencer, PEQ unit, ACOG, zombie killer body, crane stock, fork and knife attachment, automatic meal maker, and a sippie cup please. :mrgreen:
-
KRISS SMG with eotech Holosight, and TacLight. :lol:
-
Beretta Rx4 Storm with the monte carlo style stock...
...since it looks like JLS will never make the RX4 that was talked about on airsoftnews, then my second choice will have to be the Magpul Masada.
-
I'd also like some pistols other than Berettas, Glocks, and Desert Eagles. I know there are lots more, but there are alsoguns like the Five-Seven, Tokarev, etc that are under-represented (although they are obscure weapons).
-
Mauri/Ca AUG
650mm tightbore
Phantom kit,
Cylinder boreup kit
130 spring
Full systema built gearbox
custom build RAS kit
Tac laser
SPI Digital thermal weapon sight
Straight highcap[or aleast plain, anything but that waffle mag]
Under attatched smoke thrower,[imagine a mini flamethrower that shoots a cloud of harmless smoke with the same decent range] doesnt exist but hey its MY dream gun.
-
my dream gun is a Cyma akm
-mag coupler
-another mag
-suppressor
-4000 mah battery
-barell attachable flashlight and or laser
-ribbed dust cover
-under-folding stock
....not much but...yeahhh...lol
-
WA kimber with night sights, flashlight/laser and black metal slide :)
-
my other dream gun would be a ca m14 with the recoil and range as the realdeal
or a ca m60 with custom gearbox and everything upgraded to systema everything
-
Airsoft RPG-7
...
Droooool
-
Airsoft M240B... Oh, wait. :P