Airsoft Arizona
Airsoft Hardware => Troubleshooting => Topic started by: Native_Airsoft on August 17, 2007, 06:39:46 PM
-
Ok, so I have an SRC M16A2. I wanted to up grade it so, I got:
-Metal spring guide
-New shims
-M110 spring
-CA Helical gears.
(In case it might come up, I intent on buying metal bushings)
I had a buddy of mine do the gear box work for me, and when he got it done, it worked for him. When I picked it up, and brought it home, it didn't work. I first adjusted the motor ever-so-slightly. Nothing. Then my friend brought over his 9.6V, the gun the worked for 30rd.s or so, sounded nice, then it stopped working. I tested an other 9.6V in it, and nothing. I know the motor works though, I tested it out of the gear box.
Does anyone know what might be wrong? Anything I could do with the gun now to make it work? I don't want to take apart the gearbox. Anything else I need to buy since I upgraded the gun?
Thanks,
-Jon
-
It could be shimmed way too tight.
The other battery might have had a higher discharge rate.
-
I had that problem when I upped. Threw in a 3300 mah, no prob.
-
Same gun, upgrades?
My second friends 9.6V is a 4200mah. That didn't even work.
-
Same gun, upgrades?
My second friends 9.6V is a 4200mah. That didn't even work.
Then its probally shimmed too tight, take it to APD and have them do the upgrades.
-
I think I'm going to to that Pilz.
But the thing is, they say they don't work on SRC. Which sucks for me. But the thing is that mines a TSD one. I know TSD and SRC are together now, but I wondering if they don't work on plan SRC, or both. I doubt that though. I'd like to like they would. I'll be calling tomorrow.
-
I think I'm going to to that Pilz.
But the thing is, they say they don't work on SRC. Which sucks for me. But the thing is that mines a TSD one. I know TSD and SRC are together now, but I wondering if they don't work on plan SRC, or both. I doubt that though. I'd like to like they would. I'll be calling tomorrow.
You could take it to Paul or Jermiah at the Tempe JT.
-
I'll do that if APD turns me down.
I'd rather have APD do it though since they do it faster. JT(Used to be JT) guys are VERY slow at working on guns. They do get it done though.
I once needed a new piston put into an AK I used to have, and it took them 2 weeks to do it.
-
I'll do that if APD turns me down.
I'd rather have APD do it though since they do it faster. JT(Used to be JT) guys are VERY slow at working on guns. They do get it done though.
I once needed a new piston put into an AK I used to have, and it took them 2 weeks to do it.
Regardless of the time it takes them they do a excellent job on their upgrades.
-
High Quality, Low Price, Quick Service... pick two.
-
Jungle Toy? i was gonna say hopefully youre talkign abtou the new owners/business, casue youre lucky if JT employyes can even speak english, or knwo what a AEG even is.
I agree with everyone else. sounds liek its been shimmed way to tight.
its happend to me a few times. shoudl take that long to fix. 30 minutes at most.
-
Really? They don't speak English at JT anymore? They hire illegals? :roll:
I know Paul know what he's doing when it comes to AEGs.
Thank you guys.
-
Who is APD? And where are they located?
-
Jungle Toy? i was gonna say hopefully youre talkign abtou the new owners/business, casue youre lucky if JT employyes can even speak english, or knwo what a AEG even is.
You've obviously never stepped foot into an Arizona JT. :roll:
And yes, we're still the same guys...
-
Ehh, I think I'm going to set my gun at what is now "The Gearbox" (Used-to-be-JT), and let one of them check it out. Most likely bad shim job, or needs a better motor.
Thanks for the info people.
-
Who is APD? And where are they located?
Firebert, APD is Arizona Paintball Depot. They are located 1) on Bell Rd west of 32nd St about 1/3 mi. on the north side of road and 2) I think it was 90th St and Via Linda on the northeast corner of the intersection in a small strip mall...I've done business at both and they both were very accommodating.
-
Who is APD? And where are they located?
Firebert, APD is Arizona Paintball Depot. They are located 1) on Bell Rd west of 32nd St about 1/3 mi. on the north side of road and 2) I think it was 90th St and Via Linda on the northeast corner of the intersection in a small strip mall...I've done business at both and they both were very accommodating.
Thanks.. I'm just trying to find some parts before the skirmish on the 25th.
-
Naitve its most like ly the shimming, is it the one mor shimmed cause i dont think he knows how to shim helical gears, nor anyone on GA
By the Way pretty much any motor u have can pull a 110 so its not the motor.
-
Oh, ok. Thanks for clearing the motor question.
I'm sending the gun to JT on Monday, so I'll see probably mid week what's up with it.
Thank you all again.