Airsoft Arizona
Classifieds/For Sale => Airsoft Items FOR SALE => Topic started by: SLINKEY on January 24, 2011, 10:38:05 AM
-
Guns Sold
full woodland Flecktarn load out,
Comes with German flack jacket (13 layer kevlar) in flecktarn(used as a real steel target But i repaired all the bullet holes lol)
Replica Pasgt helment w/ flecktarn cover, Flecktarn boonie cap, Flecktarn pants and blouse in regular long.
and flecktarn Cira's molle vest (Unknown brand).
Great load out served me well for 4 years. Slight wear and fading from the sun.
$200 OBO.
(http://i36.servimg.com/u/f36/13/86/74/99/andy2211.jpg) (http://www.servimg.com/image_preview.php?i=320&u=13867499)
-
willing to take trades, Pm me Offers anything you got laying around.
-
jackets tight
-
(http://i76.servimg.com/u/f76/13/86/74/99/andyai13.jpg) (http://www.servimg.com/image_preview.php?i=324&u=13867499)
flecktarn molle vest includes: double stack 3X m4 mag pouch, double stack 2x mag pouch, Medical pouch, admin pouch, and radio pouch in German flecktarn. Flecktarn kevlar flak jacket, Replica Pasgt helment w/ cover. Boonie, Shirt and Pants.
(m4 mag pouches have been streched to fit 1 g36 mag per pouch, so it will hold 5 g36 mags)
-
PM sent on MK23
-
Still taking offers untill tuesday
I wouldn't mind trading the mk23 socom for a Gbb pistol, It doesnt really matter what brand, as long as it has metal slide and frame
-
Ak74, price drop to 90 bucks
and the Gear is still for trade/sale.
Im willing to part out the flecktarn gear if anyone is interested in it.
I also have a Fullsize Full metal Gas M500 shotgun (unknown brand) that shoots 8 6mm bb's at a time im willing to part with, it need some Oring work, but it shoots fine untill the gas leaks out. 100 bucks Or trade
Im open to any offer's, just offer what you got as long as it is related to airsoft.
Im looking for g3 magazines, Kjw 1911 Double stack magazines, or kwa m9 ptp magazines.
Im also interested in Desert Type gear ( light and Breathable) Vests, Webgear. as long as its comfterble in the heat
-
PM'd
-
pmed
-
Bump
-
Trade for gun linked below? Will consider adding cash as well.
viewtopic.php?f=12&t=29772 (http://www.airsoftarizona.com/forumbb/viewtopic.php?f=12&t=29772)
-
I think im looking to get away from the M4 variants I dont mind if a offered gun uses M4 mags, I wouldn't mind that actually lol. But im currently not looking for a m4. Unless its an Ics with the 2 peice gear box. or G&G raider series
Im looking for Type 89's, T-55's, good lookin ak's.. Somethin.. ya know different.. lol
-
the scope is included with the dmr, It has illuminated cross hairs, zooms 9X and has a 3.5 inch sun shade.
still taking offers.
-
I would be weary of buying guns from him or having him work on guns for you. I traded a dmr for a g and g i muddled together. His silicon wiring harness has more tears than a hooker panties. He said the gun great air seal(stock echos have better). The trigger contacts are almost fried all the way through. I asked him what parts were in it. Sure enough it is almost all stock echo. The wiring going to the batt has three solder joints and it still is a pain to grab the connector to get the batt in. Gun can't shoot on semi cause the anti reversal latch is looser than stormy daniels. All in all be careful.
side note shimjob was decent.
-
the battery i used in that was a 10.8 large. it barly fit in there, thats probably what damaged the wiring. I donno about the contacts. they wernt used very much maby my battery Increased wear and arching.. want me to buy you a new wiring harness. I got the cash to cover it.
I told you What was in it. Everything i told you about it was correct dude. thats like a 140 doller scope and a 200 doller gun, Worth way more then the gun you traded me for it. i never said it was fully upgraded internally. all i said it had was spring guide piston head /w bearings and a modifyed 140 spring, In a Ca gear box shell. wich is exactly what it is. Actually you got a upgraded piston too, I remember it was a Orange piston.. forget what brand. but i remember it being like 17 bucks..
The airseal on that was 1000 times better then this g&g. maby you dont know how to test airseal properly. you used silicon oil to lube the gear box and pretty much slapped this thing together in 5 minuets not giving a crap about how it shot lol.. its a good thing i knew how to work on guns because this thing would have broken Internally within 2 games. it was like 8 rounds per second on a 9.6 you could just hear the motor screaming to turn the poorly shimmed gears.
3/4 inch screws in the pistol grip. that damaged the out side of the grip where it started to come thru it.. Stripped out gear box pistol grip screw threads.. and the other one had a stripped out head took me like 20 minuets to get it out. a Broken Front seal part for the blow back, that has to be replaced. the wiring is all fucked up with electrical tape all over it where it was improperly installed and pinched against the body where the buffer tube go's onto the reciver. only thing i can think of on the wiring in the gun i traded you is from where i removed the fuse and the small tamaya that was right there, witch is probably what you are refering to, about "3" soder points. or what ever But atleast you gave me enough shims for about 5 guns. i guess
but man the anti reversal latch has nothing to do with the gun shooting on semi auto. thats so the piston doesn't cycle back wards if you let go of the trigger during mid piston stroke. it could result in a stripped piston and weird feeding issues. I think your refering to the Semi auto activation lever. they do happen to come loose from vibration. and that thing hit very hard, making alot of vibration.
But Ill buy you the wiring harness, if you want me too. Im not here to stiff anyone im just here to play airsoft and offer an alternative for people that cant afford that expensive work on guns. and everyones gun i have worked on so far they have been pretty stoked about.
-
My bad when a said anti reversal, i meant cut off lever( need to find one that matches up.)
And i told you that it will probably need that part on the front of the blowback.
Used impurity free lithium grease for the gears, silicon oil for the cylinder.
Told you that airseal was with stock parts.
For the ROf spin that motor and tell how strong those magnets are
About the grip if you want the one that came on it it is yours good luck with it. Did what i could do with what i had.
What ever grease you are using, it is turning into gum part i have the gb soaking in brake cleaner to get that sh!t out. Use it sparingly, the selector plate had enough on it to grease a spur gear.
About the wiring it had 3 joint per terminal, So you didn't just eliminate a fuse
The Wiring inside the box is cut up bad,
The wire going to the motor had tape covering a 1" tear, the motor pins were cut off another 18 gauge harness and soldered into the 16 awg of the silicon harness. Btw two pins are 2 bucks pretty cheaper and easier to do than just cut solder and wrap with tape.
I don't even want to get into the hop up on the dmr, but what ever you did i hope it works on the other guns you did it to
I'm stoked about the paint job on the scope, and gun i need to remove. And i told you about everything that was going to be on the gun and you okayed it, now i know why.
And no i don't want another harness. All i want is stop throwing fecal matter cause i can't prove what you did and vise versa. cause any photos could be false. Example i could have cut up the hareness before i photographed it.
-
seriously i ment no harm i hadn't gone into that gun internally for like 5 months. apparently i dont remember the wiring being messed up how you say it is.
I offered man, Its not like wiring is an expensive thing.
But what ever you say about the hopup dude. It allways worked really well for me.
and works just as good in this G&G.
-
Andy has done a lot of work for me and I can it has all been great. He really knows what he is doing when it comes to fixing guns