Airsoft Arizona
General Airsoft Arizona => General Airsoft Discussion => Topic started by: BlackDragon21 on February 14, 2012, 03:11:18 PM
-
how i'm trying to put on my madbull whisper and i want to ask is there a simple way of taking off the orange part to put on the whisper?
-
Hot water works well
-
so just dip it in hot water? for how long?
-
aite thanks guy for the advice.
-
Wipe away the glue on the threads after you twist it off.
-
so i did what you guys told me too and the tip won't come off... any other way of getting it off? my tip isn't metal it's plastic
-
so i did what you guys told me too and the tip won't come off... any other way of getting it off? my tip isn't metal it's plastic
It could be that theres a little screw in the tip to keep it in place [or you may be turning it the wrong way], if this the case your going to need a really small allen key or pin to poke it out before you can remove the tip. Also what gun do you have.
-
I have a G&G CM4A1. i try to turn it both way and nothing
-
Yeah, it has a screw, look on the bottom of the tip you'll see it. Don't force it off or you'll strip the threads. Look for some how to videos on youtube or google it.
https://www.google.com/#hl=en&sa=X&ei=IgU7T4WgC8KU2QX7nrHLCg&ved=0CBkQvwUoAQ&q=how+to+remove+orange+tip+on+combat+machine&spell=1&bav=on.2,or.r_gc.r_pw.r_cp.r_qf.,cf.osb&fp=5542408addfb2bfa&biw=1280&bih=929 (https://www.google.com/#hl=en&sa=X&ei=IgU7T4WgC8KU2QX7nrHLCg&ved=0CBkQvwUoAQ&q=how+to+remove+orange+tip+on+combat+machine&spell=1&bav=on.2,or.r_gc.r_pw.r_cp.r_qf.,cf.osb&fp=5542408addfb2bfa&biw=1280&bih=929)
-
Just get a dremmel with the thin sanding blade and cut it the long way on the plastic flash hider. Do both sides and there you go.
-
Haha that's the most obvious part nobody mentioned. It's a little allen screw that you remove then you should be able to twist it off unless the glue isn't melted. If it doesn't twist then boil some water (I find you have to boil with G&G) and leave it in the water for a good 2-3 minutes. Use some pliers and twist it off. Make sure you remove the inner barrel and hop up just incase. Once it starts twisting it should become easier and easier. When you are done twisting it off take a paper towel and wipe off the excess glue left on the threads.
-
I put mine in boiling water for 2 minutes, then twisted it off right after with a oven mitt.
Worked like a charm on my Dboy AK74su. Thank you.