Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Kilo64

Pages: [1] 2 3 ... 7
1
***BUYER BEWARE***

***Seller claims that item was shipped via parcel post hence lack of tracking information. Seller has since completed a refund from the paypal claim and considers this matter closed. However, the fact still remains that seller has yet to respond to any messages that were sent prior.***


Payment to seller was made on Jan 23, 2014 for Matrix TF3 vest. Since then, the Seller has made zero effort to respond to any of my messages regarding shipment of the item but yet was able to respond to posts on his other threads. PM's were also sent to his account in a different forum and have yet to receive a response.

His other threads are as follows:
http://www.airsoftarizona.com/index.php?topic=37513.msg289462#msg289462
http://www.airsoftohio.com/forums/showthread.php?p=433432
http://www.airsoftsociety.com/forums/f167/wts-tf3-vest-fastmags-matrix-vest-91992/

Should seller initiate contact with me and resolve this issue, I will follow up with an update.

2
Airsoft Items FOR SALE / Re: PSG-1
« on: May 25, 2012, 06:44:52 PM »
Memorial Weekend Special!!!

$500

3
Airsoft Items FOR SALE / PSG-1
« on: May 07, 2012, 03:51:40 PM »
Tokyo Marui PSG-1

I'm the 3rd owner of the rifle so it's seen its fair share. The externals are in very good condition with some missing screws from the foregrip (machined phillips head) It does not affect the condition since I have the rear secured. Also missing the knobs for the buttstock.

The gun currently chronos at 508fps with .2g bb's.







Trades were partially dremeled off.

The gun comes with the following:

Internals:

    It has a Systema full tune up kit installed:
    Systema bevel and spur gear
    Systema metal spring guide
    Systema aluminum piston
    Systema bore up silent piston head
    Systema bore up airseal nozzel
    King Arms tappet plate
    Systema magnum motor
    non AB mosfet
    custom chamber block
    TGS anti-reversal latch
    Edgi 710mm 6.01 Tightbore barrel
    R-hop

Other parts included:

    2 Gearbox shell upper
    1 Gearbox shell lower
    1 Complete stock TM gearbox
    extra spring release latch
    3 15rd mag
    1 120rd mid cap
    MISC parts (Lower receiver, cylinder, piston head, gears, extra TGS anti reversal, anti reversal latches, wiring, trigger block, etc..) MISC PARTS ARE AS IS

I am looking for a quick sale with my asking price of $650 or best offer.

Shipping will be split halfway between seller and buyer within the continental USA

International buyers will have to pay full shipping.

Trades are welcome. No parting out







4
General Airsoft Discussion / Re: Please help!
« on: October 26, 2011, 06:23:14 PM »
A quick update:

Straight from Facebook page

"OK. Here is the latest update from the court case today. I am extremely pleased to let you guys know, the politicians are starting to listen. The case was adjourned by the town until next week. We have had several productive conversations and it looks like we are making progress. We will use the next couple of days to sit with the town and determine if there is a way to satisfy all parties.
...Please know that this progress is a direct result of your efforts, your passion for our game, and your standing up for what is right. Continue to build support for our page. We want to continue this momentum while at the same time, leaving a space for a constructive solution.
We are overwhelmed with the support we have received locally, nationally, and even globally. I speak for the entire Cousins family when I say we are blessed to call each and every one of you a friend."

Thank you everyone for coming together! From my buddy on the ground, it seems that their offices were so flooded by calls and emails that they couldn't come up with anything. NONE of the politicians were ready for the public outcry it seems.

Thank you all again!

5
General Airsoft Discussion / Re: Please help!
« on: October 26, 2011, 12:42:13 PM »

6
General Airsoft Discussion / Please help!
« on: October 26, 2011, 12:01:50 AM »
Hello fellow Airsofters and outdoor enthusiasts alike,

I live in New York City and for the longest time, have worked and played at my "local" field (About 1.5hours drive but I still consider it local since its the only thing closest to me)

The place of venue is Cousin's Paintball and at one point in time was also called PEV's. Every Sunday on the property, they would hold Airsoft Games on a dedicated field where me and a bunch of buddies and Old Co-workers get together and shoot the shit out of each other whilst having a great time.

It is now under attack by the local politician Connie Kepert and environmental extremist Richard / Dick Amper.

Their reasoning for shutting down the land that the field is currently on is to lock the gates and turn it into a preserve in order to prevent any future developing.

If you've been around the area, the ONLY reason why the land is still there is because Cousins Paintball have been there for almost 30 years! Surrounding the area is a gated private community and other venues of businesses (ie:strip malls, big dept stores, etc...).

Every year, Cousins Paintball hosts one of the LARGEST big games in the North East in which involves tanks and even a helicopter (YES A REAL HELICOPTER! THAT SHOOTS AT YOU!)

Even though this is not your local field nor is it a concern of yours, please take the time out and show support for the sport and field.

Cousins Paintball was my first ever "War" experience and the first time my Dad ever took me and brother out to Long Island back in 2001.

Cousins Paintball was my first REAL job back in 2005 and was the best damn job I've ever had. I still have it in my resume and is the only job I'm never tired of talking about because it bought back so much different memories.

I ask for your support now. Please visit the facebook page and voice your concerns as well! We need all the public coverage we can get so help spread the word.

https://www.facebook.com/rickcunhapolitical/posts/10150342236497175#!/pages/Paintballers-Against-Brookhaven/187315184681902

Thank you Airsoft Arizona for keeping me entertained all these years and the great deals and people whom I've got to dealt with on this forum.

Please help spread the word!

Yours truly,

-Tai

7
Airsoft Items WANTED / Re: WTB Co2 grenades & Midcaps
« on: April 28, 2011, 10:29:46 PM »
DangleBanger,

I'm sorry that I'm located in NY? and in fact I do realize that this is Airsoft "ARIZONA"(I included the quotes too!) but I've been around this forum for a pretty long time and have done a whole lot of transactions here as well.

It greatly saddens me that you do not ship anything. And it saddens me even more that I won't be able to accept your offer.

But if you can dish out a sweet enough deal for your midcaps, I can have UPS swing by your house and personally pick up the package from you so that way you won't ever have to go anywhere near a post office.

Thanks again for the offer :)

8
Airsoft Items WANTED / Re: WTB Co2 grenades & Midcaps
« on: April 28, 2011, 09:32:29 PM »
Thanks for the offer. Looking more for cheap plastic 120rd midcaps that I could lose without worry.

Will be attending a big 20hr OP and need mags that could be dropped and forgotten about (by accident atleast :lol: )

Thanks!! Keep the offers coming

9
Airsoft Items WANTED / Re: WTB Co2 grenades & Midcaps
« on: April 28, 2011, 08:50:56 PM »
NY

10
Airsoft Items WANTED / WTB Co2 grenades & Midcaps
« on: April 26, 2011, 12:56:11 AM »
Looking to purchase co2 stun grenades or thunder B

Also looking for midcaps for m4 platform.

11
Airsoft Items WANTED / Re: WTB A&K Masada Barrel Set & G&G M4 Midcaps
« on: March 08, 2011, 10:25:33 PM »
Still looking

12
I love it to death.

The receiver is one solid piece of metal that you can't really break. There just aren't any weak spots on it.

The polymer on this piece is excellent. No creaks no cast marks and doesn't even bend! Everything fits flush with no creaks or wobbles.

The Masada utilizes a v2 gearbox thats just like the ones you find on the m4a1 series whereas the motor is separate inside the grip.
The only bad thing is that if you strip the retaining screws on the motor plate, you're screwed (no pun) unless you re-tap it for a bigger size.

No quick change spring feature on the gearbox like the PTS one and no motor cage design like the PTS one.

If you really really really want the quick change feature, this will set you back $30 dollars, but more than worth it:
http://www.px-airsoft.com/showroom/mode ... 8265008819

(I think it is the STAR/ARES design mainly from the microswitch and the Quick Change feature) Should be able to work with no problems on the A&K since it is a standard v2.

Dayton,
I just looked at the ARMS magazine again, and it doesn't really show much detail. I'll try to post up more detailed pictures when I get my hands on them.

But from my up close observations, it would seem that all you have to do is change the QD ring and you're golden. But that is only if the barrel specs are exactly the same. (even then, you have to worry about the hopup, since PTS utilizes their own proprietary hop assembly thats unique to the system).

PLEASE! IF YOU SEE SOMEONE WITH A LONG BARREL SET! LET THEM KNOW THAT THERE IS SOMEONE HERE THAT WOULD LOVE TO BUY IT.



If you do happen to get the A&K, sell me the 14 inch front set please  :lol:

13
I was wondering the same thing too.

But according to the the close up photos of the PTS one from my ARMS magazine, it would seem that the specs are close but the unit will not fit the A&K without minor modification.

I'll try to upload photos of it when I get back tonight.

I use my Masada for woods games. So its becoming a pain for engagement distances

14
Airsoft Items WANTED / WTB A&K Masada Barrel Set & G&G M4 Midcaps
« on: January 24, 2011, 09:52:40 PM »
Looking to purchase the Barrel set for the A&K Masada.

Also looking to purchase G&G M4 Midcaps. Preferably in bulk.

Please PM all offers.

Thanks!

15
Airsoft Items FOR SALE / WTS WE PDW(s)
« on: October 18, 2010, 08:58:34 PM »
Looking to sell two WE PDW GBBR's ( I have 3 of em)
***Buyers are responsible for all shipping costs***

These are the closed bolt systems (Copper Tube)

One of the rifles I purchased as a plinker and the other one was excess from a team order.

The first rifle on the list is your bone stock WE PDW
It is the the version 2 so it has slightly better internals than the first (test) batch.

The gun includes a
Ratech N.P.A.S. System
Green Gas Stanag Magazine
Green Gas KAC PDW Magazine

Looking for $200 obo

The 2nd rifle is a Brand New In Box (BNIB) WE PDW v2
Never shot never touched. Just sat in the box all taped up

Looking for $260

The only trade I am willing to take at this time is an A&K Mk43

I don't have pictures of the items since they are currently sitting in my garage (30 miles from my location)

The plinker has minimal scratches that you see on all rails from bumping around. No other scratches or wear on parts.

The BNIB rifle is just a BNIB rifle. Just a plain jane cardboard box with WE PDW on it.

Pages: [1] 2 3 ... 7