« previous next »
Pages: [1]

Author Topic: Guns SOLD (Price Updates and New Stuff)  (Read 1663 times)

Offline Whiskey11

  • Trade Count: (0)
  • Sergeant Major
  • *****
  • Posts: 522
    • View Profile
Guns SOLD (Price Updates and New Stuff)
« on: October 06, 2007, 07:34:15 PM »
Hey everyone i've got two guns for sale.  First off is my ICS 2006 PCR97 M4.  I'm selling her because I have no need for her anymore, I have some newer guns that i'm going to be using more often then my M4 so she is getting sold to fund other projects.

Internally the lower half of the gearbox is stock with the exception of the wiring

Lower Gearbox:
Stock Steel Bushings
Guarder Steel Gear Set
Rewired 16AWG Wire wired to rear with deans (reversed)
Turbo 3000 Motor
Stock Trigger Assembly

Upper Gearbox:
Guarder M110
Guarder V2 Spring Guide
Guarder Standard Cylinder
Guarder Tappet Plate
Guarder Air Nozzle
Systema Silent Piston Head
Systema Silent Cylinder Head

Guarder Clear Hop Up Bucking

Externally the only thing thats been done is a small hole for the wires to come out of on the stock and a battery bag.

I will include:
450 Round Hi Cap Mag (the stock ICS one)
8.4v 3500 mAh battery wired for this gun
6 Mag Mid Cap Mags (Plastic)
Guarder Anti Heat Wire Kit for M16 Full Stock

Wont part out at the current but as money becomes more and more sparse I may part out the mags.

As Above for $260  SOLD Pending Funds



Next up is a TM HiCapa (2011) 5.1.  HiCapa was my first gas pistol and probably my last one.  I have no need for it and no gas for it so I dont use it at all.  As a result i'd rather see it gone then see it gather dust in my car.

Completely Stock has run on green gas since the day I got it, 10,000 rounds through it and slide is still in excellent condition.  One Magazine that has some small leaks in the fill valve (may need a good soaking in oil to get to hold properly) Sold as is:

As Above for $65 SOLD Pending Funds



I accept Paypal or Cash and I will only do in person delivery.  I dont want to mail these items.  No Trades Please! Thanks for Looking!

Whiskey Out!
« Last Edit: November 08, 2007, 08:59:21 PM by Whiskey11 »
Logged

Offline Whiskey11

  • Trade Count: (0)
  • Sergeant Major
  • *****
  • Posts: 522
    • View Profile
(No subject)
« Reply #1 on: October 10, 2007, 07:21:40 AM »
Price Drop:

ICS 2006 M4 Package: $260
TM HiCapa 5.1 w/ Mag:  $65


Replaced the broken gear with the Guarder Steel Gears shoots great now.  Also fixed the hop up, with no hop on its still overhopped, then again it is a fairly new hop up bucking and I only put about 400 rounds through it.  Works very well now shoots very close to 165 feet before it overhops.  Heavier bb's then .23's would certainly fix that issue but its got good range again.  I've had one offer so far and he is awaiting money both guns still up for sale.  PM With any questions.
« Last Edit: December 31, 1969, 05:00:00 PM by Whiskey11 »
Logged

Offline XavierMace

  • Site Admin
  • Administrator
  • Trade Count: (+16)
  • Major General
  • *****
  • Posts: 2906
    • View Profile
    • http://www.xaviermace.com
(No subject)
« Reply #2 on: October 16, 2007, 09:49:58 PM »
Anti reversal latch and stock are proprietary.  Grips are iffy, mock bolt release is proprietary.  Nozzle's are hit and miss, metal hopup chambers need modifications.  

I have 4 ICS's sitting right here that say you can't put a TM Compatible tube on them....  Not that I want to, but I can't without modification.

Anyways, if you change your mind about trades and/or parting it out let me know.  I would take it off your hands now, but I won't have the cash to spend on more airsoft guns for a while.
« Last Edit: December 31, 1969, 05:00:00 PM by XavierMace »
Logged

Offline Whiskey11

  • Trade Count: (0)
  • Sergeant Major
  • *****
  • Posts: 522
    • View Profile
(No subject)
« Reply #3 on: October 17, 2007, 12:07:51 AM »
The TM Buffer tubes fit on the ICS, you have to remove the stock one and pull the screw out and use the TM Screws.  Thats why there is the threading on the back of the upper gearbox.  The ICS Hop up chamber is really nice.  If the grips are an issue buy real olympic arms grips from olyarms.com (18$) and you are set with real grips :)  The Guarder Nozzles work flawlessly with the ICS hop up.

Anyways, If the person who has offered to buy it after he gets his paycheck doesnt come through i'll probably allow some of it to be parted out.  As of right now i'd like to sell it as is as a package.
« Last Edit: December 31, 1969, 05:00:00 PM by Whiskey11 »
Logged

Offline Whiskey11

  • Trade Count: (0)
  • Sergeant Major
  • *****
  • Posts: 522
    • View Profile
(No subject)
« Reply #4 on: October 22, 2007, 11:33:13 PM »
Some New Stuff For Sale:
CA High Torque Motor: $30 + Shipping Practically new, less then 500 rounds shot through it, no Pinion gear.

CA Standard V2/V3 Gears:  $20 + Shipping Also practically new, came out of my M14 with less then 2000 rounds through them, no signs of wear.

ICS V2/V3 Gears:  $15 + Shipping, Used the Sector gear is missing one tooth on the full set of teeth, still runs, other gears are practically pristine, minor wear over 50,000 rounds on them.

TM V7 Gears:  $15 + Shipping, Used but like new, minor wear on bevel gear roughly 20,000 rounds on them.

Assorted Stock Springs: $10 + Shipping Each

One M120 or M110 Spring:  Systema made, no shots through it, originally in M4 but got mixed up with my other spring.  $10 + Shipping

ICS M4 Upper Gearbox: $25 + Shipping, Clean Stock, very very little rounds through it no wear, all screws accounted for.

CA M16 Barrel $15 Bucks + Shipping, comes in Madbull Tightbore container, very little use, maybe 15000 rounds straight and true.

I will Take Pictures later tomorrow and post them, PM if interested
« Last Edit: October 26, 2007, 12:15:33 PM by Whiskey11 »
Logged

Offline XavierMace

  • Site Admin
  • Administrator
  • Trade Count: (+16)
  • Major General
  • *****
  • Posts: 2906
    • View Profile
    • http://www.xaviermace.com
(No subject)
« Reply #5 on: October 23, 2007, 10:22:13 AM »
I am going to be up in Prescott Valley in 2 weeks.  I would be interested in the ICS Upper gearbox if I can pick it up.  PM me if that would be an option for you.
« Last Edit: December 31, 1969, 05:00:00 PM by XavierMace »
Logged

Offline Whiskey11

  • Trade Count: (0)
  • Sergeant Major
  • *****
  • Posts: 522
    • View Profile
(No subject)
« Reply #6 on: October 23, 2007, 03:54:52 PM »
PM Sent

I should have clarified, there is nothign in the ICS Upper, it is just the upper half of the gearbox shell not a complete ICS upper (with spring and stuff).  All stuff still for sale.

Pictures:

CA High Torque Motor:



Assorted Springs:


M110/M120


ICS Upper Gearbox Empty Shell w/ Screws:


CA Standard V2/V3 Gears





ICS V2/V3 Gears




CA M16 Length Barrel





Sorry for the crappy Pictures my camera is ancient :)
« Last Edit: December 31, 1969, 05:00:00 PM by Whiskey11 »
Logged

Offline Whiskey11

  • Trade Count: (0)
  • Sergeant Major
  • *****
  • Posts: 522
    • View Profile
(No subject)
« Reply #7 on: October 30, 2007, 06:41:15 PM »
Price Updates:

CA High Torque Short Motor: $20 + Shipping Practically new, less then 500 rounds shot through it, no Pinion gear.

SOLD CA Standard V2/V3 Gears:  $10 + Shipping Also practically new, came out of my M14 with less then 2000 rounds through them, no signs of wear. SOLD

ICS V2/V3 Gears:  $8 + Shipping, Used the Sector gear is missing one tooth on the full set of teeth, still runs, other gears are practically pristine, minor wear over 50,000 rounds on them.

TM V7 Gears:  $8 + Shipping, Used but like new, minor wear on bevel gear roughly 20,000 rounds on them.

Assorted Stock Springs: $5 + Shipping Each

SOLD One M120 or M110 Spring:  Systema made, no shots through it, originally in M4 but got mixed up with my other spring.  $10 + Shipping SOLD

ICS M4 Upper Gearbox: $15 + Shipping, Clean Stock, very very little rounds through it no wear, all screws accounted for. Nothing in it Just the shell and screws.

CA M16 Stock Barrel $10 Bucks + Shipping, comes in Madbull Tightbore container, very little use, maybe 15000 rounds straight and true.
« Last Edit: November 06, 2007, 11:33:30 PM by Whiskey11 »
Logged

Offline sdobbins

  • Trade Count: (0)
  • Sergeant
  • *****
  • Posts: 119
    • View Profile
(No subject)
« Reply #8 on: November 06, 2007, 10:58:04 PM »
I'll take CA V2 gear set.
« Last Edit: December 31, 1969, 05:00:00 PM by sdobbins »
Logged

Offline Whiskey11

  • Trade Count: (0)
  • Sergeant Major
  • *****
  • Posts: 522
    • View Profile
(No subject)
« Reply #9 on: November 06, 2007, 11:34:44 PM »
They are yours, sold!
« Last Edit: December 31, 1969, 05:00:00 PM by Whiskey11 »
Logged

Offline stealthmaster14

  • Trade Count: (0)
  • Sergeant First Class
  • *****
  • Posts: 276
    • View Profile
Re: Guns SOLD (Price Updates and New Stuff)
« Reply #10 on: April 25, 2009, 10:30:07 PM »
PMed
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »
Logged

Offline Exarach

  • Trade Count: (+7)
  • Brigadier General
  • *****
  • Posts: 1769
    • View Profile
Re: Guns SOLD (Price Updates and New Stuff)
« Reply #11 on: April 25, 2009, 11:04:33 PM »
Quote from: "stealthmaster14"
PMed
good necrofail there buddy. ](*,)
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »
Logged
\"Friendly fire isn\'t\"
If a speeding pellet in a quiet woods hits a noob in the face, and he cries, does anyone care?

Offline stealthmaster14

  • Trade Count: (0)
  • Sergeant First Class
  • *****
  • Posts: 276
    • View Profile
Re: Guns SOLD (Price Updates and New Stuff)
« Reply #12 on: April 26, 2009, 01:45:58 AM »
Yeah, I realized that it was old after I posted.  

Sorry about that.  I'm looking for a motor....

This is a FS thread, I don't think there really is necro posting........but whatever
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »
Logged

Offline sethb7290

  • Trade Count: (0)
  • First Sergeant
  • *****
  • Posts: 486
  • OEF Vet, NFG, FBGM.
    • View Profile
Re: Guns SOLD (Price Updates and New Stuff)
« Reply #13 on: April 26, 2009, 10:37:44 AM »
but this post was in 07
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »
Logged
Pages: [1]
« previous next »