Author Topic: Echo1 MRF-MX Lipo ready?  (Read 1196 times)

Offline Rusky13

  • Trade Count: (+4)
  • Private First Class
  • ***
  • Posts: 46
  • Use only what's needed
    • View Profile
Echo1 MRF-MX Lipo ready?
« on: September 27, 2014, 04:30:13 PM »
I have an Echo1 MRF-MX, I'm wondering what do I have to upgrade for it to handle and last using a Lipo (7.4). Any suggestions will be of great help.
Live without regret

Offline AKGuy

  • Trade Count: (0)
  • Corporal
  • ****
  • Posts: 68
    • View Profile
Re: Echo1 MRF-MX Lipo ready?
« Reply #1 on: September 27, 2014, 06:44:56 PM »
I have a cyma ak its all stock and I run a 7.4 lipo 1200 mah  no problem. Its when you start using bigger lipos like 11.1 that trouble starts happeninlike gears and pistons stripping. I was told a 7.4 lipo was about par with a 9.6 nicad.

Offline Rusky13

  • Trade Count: (+4)
  • Private First Class
  • ***
  • Posts: 46
  • Use only what's needed
    • View Profile
Re: Echo1 MRF-MX Lipo ready?
« Reply #2 on: September 27, 2014, 10:50:04 PM »
What is a good LiPo charger?
« Last Edit: September 28, 2014, 02:19:58 AM by Rusky13 »
Live without regret

Offline AKGuy

  • Trade Count: (0)
  • Corporal
  • ****
  • Posts: 68
    • View Profile
Re: Echo1 MRF-MX Lipo ready?
« Reply #3 on: September 28, 2014, 02:21:59 PM »
I bought mine from lynchtec at wild west paintball. It works good. I would recomend going to a store that sells rc cars and planes.