new 416 internal parts

[Michael G]

So i was able to get the gear box out of my 416 and found out what was wrong with it, the teeth of my piston were ripped off ahaha there is clear blue-ish plastic all over my gear box that i have to clean out so while i do that i need to get a new one also want to make my gun much more reliable and i need to up my fps to 400 so if someone could tell me the best parts to order that would be amazing thank you very much!

[Michael G]

OH! also forgot i want a new motor one that is strong enough to give me a great rof at 400- ish fps

[spazz]

you dont have to order parts, there are shops in the valley that you can pick up all the parts you need to build your gun the way you want it.
in the east valley you can get parts from vangard. in the west valley you can get parts and a lil advice from the techs at comandpost at 19th and union hills and s9 airsoft at 4th ave and hatcher. i work at comand post.
you come into either shop and then you can look at the parts instead of just pics.

[Tiedyeftw]

Remember, you'll (probably) need to install a Sorbo pad in order to adjust for AOE, so that your piston will have better longevity this time around.
And as far as springs come, it's not hard to reach 400fps as long as you have a good air-seal.
And for motors, there are a lot of options for you.
If you're willing to drop money on a REALLY great motor, you should look into the Lonex A2 motor. Probably one of the best motors out there. GREAT torque, and speed.
But again, there are more techs out there that can give you a lot of good input on these things.