I finally decided to sell off most of my airsoft guns. Prices are somewhat flexible. I've gotten into RS shooting now. Not parting anything out now. ABSOLUTELY NO TRADES.
Pics up.
CA SR-25 URX - $500
External
-CA SR-25 silencer
-King Arms scope mount
-Action M3 3.5-10x40 scope w/ 90mm sunshade
-G&P SPR grip
-MagPul PRS stock
--King Arms Li-po in stock tube
-CA large charging handle
-G&P SPR trigger guard
Internal
-G&P cylinder head
-G&P piston head
-G&P 7mm bearings on Bevel and Spur gears
-SP130 spring
-Prometheus Perfect NEO hop up chamber
-MadBull 617mm V.2 tightbore
-Prometheus soft bucking
-Laylax strike chamber
-MadBull shark nub
Comes with KA 1200mah lipo for the stock tube, 3 CA midcaps w/ Magpuls, 1 standard hicap, original box (even though it won't fit), an extra G&P piston, and the URX tool. Never used this in battle, and less than 100 rounds through it. Has minor wear on the reciever from taking it apart. I also broke one of the tabs from when I changed out the trigger guard. Fixed it with epoxy putty.
M4 CQB - $400
Internal
-6MilSpec Gear Box with 7mm Bearing Bushings (CNC'd of MilSpec aluminum)
-F2, Level 4-5, 7mm Bearing Bushings (able to spin at over 70,000 RPM)
-Prometheus Hi-speed gears
-Prometheus POM piston head
-Prometheus gold motor leads
-Laylax strike chamber
-Madbull shark nub
-Cut-down Madbull V.2 tightbore
-G&P M120 motor
-G&P polished cylinder
-G&P spring guide
-G&P cylinder head
-G&P nozzle
-Madbull M110
-Madbull piston
-G&P switch assembly
-Deans 16 AWG 660-strand wiring
External
-G&P HK416 stock
-G&P/Airsoft Surgeon Marine lower
-DYTac VLTOR MUR upper
-STAR Hogue grip
-Classic Army CQB barrel
-CA sling mount
-King Arms RIS
-King Arms TD grip
-King Arms PRI front sight
-Action #40 rear sight
-G&P SR16 flash hider
Don't know what to say about this gun. I got bored one day and put it together from the spare parts I had lying around. As with the SR25, I broke one of the tabs when I replaced the trigger guard. Used epoxy putty to put it back on. The MUR is one of the first 100 that DYTac made. MTHaynes gearbox is no longer made and the shell alone is $250. Airsoft Surgeon body is pretty unique too, although it is missing the right side selector cover thing.
UN Custom TM Glock 17 (Tan body) - $220
UN Custom-Marui G17 Metal Version w/14mm-
-Marui G17 Based
-Guarder Steel Outer Barrel with 14mm Anti-Clockwise Thread Installed
-Guarder Original Frame for Marui G17 (Olive Drab) Installed
-Guarder Aluminum Slide for Marui Glock 17 Installed
-Guarder Steel Recoil Spring Guide and Hammer Set Installed
-Hi-Flow Valve Installed
-Custom recoil spring
Comes with PFI Smokecap and G&G mini suppressor, 1 mag and original box. I got UN to put the tan body on instead of the OD body. I'm fairly certain that this is the only one they made with the tan body. Never seen battle and only fired about 200 rounds through it. New recoil spring now makes it short stroke, so it can shoot faster. Slide does not lock back on the last shot.
Airsharp M2HB - $400
I got this as the kit that you put together and has no gearbox. I then got a CA M249 gearbox, put my Kanzen ceramic bearings in, and whatever spare parts fit in it. I know it has G&P gears, KN cylinder, G&P cylinder head, Element piston, PDI 170%, Madbull 590mm barrel, and other parts. I made the crappy tripod out of 2" ABS tubing. Ammo can is attached to the tripod and the feed mech is made from an Inokatsu M60 feed tray. It winds only when the gun is fired. Gun has a master power switch and green "On" light. It shoots about 30rps and is actually very accurate and has good range. Comes with the gun, tripod, feed tray, and a Thunder Power 4200mah Li-poly battery. Barcode stickers are all gone. Gun and tripod are not painted.
G&P M203 RIS Medium - $80
This was a long version, but I cut the barrel about halfway between the lengths of the short and long version. This has never been used in battle. It is also missing the trigger guard because it broke.
Wiley X SG-1 glasses - $70
Never even put these on. Bought them when I lost my old ones, but then I bought my Flakjaks the next day. Comes with everything in this picture (except mine have smoke lenses instead of the green tint). I'll get my own up when I have the chance.
JT full face mask - $40
Never even worn this. Bought it a while ago in case I ever went to a game requiring them. Haven't airsofted since then.
More coming later (spare parts, mags, batteries, etc).
