That battery is toast.  If you used it until it started to "weaken" you probably already discharged it past the safe point.

What if I am that troll?

Replied.

I'm going to go with Glock.

Hey all! Ive been looking at first guns to buy for a bit now, and have had the Ics cxp15 recommended a ton of times. What are yalls thoughts on that gun? Should i get plastic or metal? My budget is about 250ish, so more recommendations are great! I have little knowlege about airsoft guns or how to upgrade/fix them, so something sturdy and good out of the box is a must,  haha. Thanks!!!

ICS's plastic is a nylon fiber similar to the older CA and Ares G36's.  I prefer them to the metal ones as the delta ring threading is more forgiving to non-spec delta rings, and the upper gearbox slides in and out easier with the plastic.

I would prefer not to part out the lots unless absolutely necessary as I simply need it to go.  I'm pretty firm on the prices for the "rarer" items, but everything else, make a reasonable offer.  I can provide pictures if needed next week, you must pickup at my place in Phoenix and I'm only available on Saturday's and Sunday's (all day).  Everything works unless otherwise noted but most of it has been sitting unused for 5-10 years so expect them to need some TLC.  If you want to test them, you are welcome to as long as you bring whatever you need to test them.  Most of my stuff is in storage.  Cash only, no reasonable offer refused.

Rarer items:
Tanaka M700 lot: $500
Primary gun is a completely built Tanaka, only thing it needs is to be tapped for HPA (It does function properly as is).  Preban Tanaka bolt, G&G Heavy Barrel Kit, PDI 6.01mm barrel (IIRC), Action Army AAC 21 chassis, bipod, scope, Tanaka long mag (plus the long mag from the kit), and a box of Maruzen SGM BB's.  In addition to that, I'm including all my related M700 compatible parts which includes a G&G G96 parts gun, a KJW M700 takedown parts gun, a handful of Tanaka and KJW outer barrels, a RS Hogue stock that's been modified to take Tanaka guts (still needs a little more work), and whatever other parts I can dig up.  A quick look says there should be at least enough parts for one more complete Tanaka, plus some new G&G knock arms, an opened G&G Rubber set, and two P* Striker springs.

ICS M16 DMR: $280
As many of you are aware I've always had a thing for ICS M4's.  Some would call me an expert on them.  I would call this my masterpiece and I can say with near 100% certainty that you will never find another one like it.  Externally, it's got a two tone FDE/Black paint job, PSG-1 style grip, an Element PRS that's been modified to work on an ICS and hold a LiPo battery, 16" JBU RAS, 18" Madbull outer barrel, ICS railed gas block, rail mounted bipod, G&P KAC scope mount.  Internally is where it gets really interesting.  Gearbox shell has been custom machined to use 8mm bushings.  To the best of my knowledge nobody else has done this.  Bushings are Kanzen ceramics.  Guarder ITU gearset, AMP T5000L motor, PDI 6.01 barrel, wired to rear with G&P Dean's style connectors.  Not sure what spring is in it right now, it's shooting 480fps.  Want to say a Guarder SP130.  Previously had a MAG MS210 spring chrono'd around 720fps until the spring failed.  Suffice to say it's setup for torque and will pull over anything you put in it.  Includes Pelican case, Magpul RVG, some rail covers (don't recall the brand), and a bunch of VN style green label PMag's with ranger plates.

Kokusai M16A2: $100
Worked fine last time I fired it about 8 years ago.  Includes 5 mags which have some light surface rust.  If you have to ask what this is, you probably don't want it and I don't have a rig to test it with.

Other stuff, make offers:
Box 'O ICS parts: $60SOLD[/color]
First come, first serve.  There's half a dozen or so metal lower receivers, a bunch of lower gearbox shells, a bunch of pistol grips, a handful of retractable stocks, one folding stock, a bunch of barrels....  You get the picture.  As I find more parts, I'm tossing it in the box.  Should be able to at least make one gun out of it plus have more parts than any one person should have.  Please don't ask for more specifics or ask if you can pick out from the box.  Either take the whole box or leave it.

KWC Sigma .40 Package: $120
Two complete guns, both work last time they were used.  One all black, one two tone nickel/black.   Slide on the all black one needs some paint.  Two green gas mags, one needs a fill valve. 6+ Co2  long mags.

G&P Elcan: SOLD
Looks basically new.

EA Specter DR: $80 SOLD
Never used, might even be able to dig up the box.  Fixed 4x model.

Rico Alpha 9 (V1): $40
One of the mounting screw broke, seems stable enough with a single screw though.  No batteries.

Element zISM-V: $60
It's Chinese electronics.  When it decides to work, it works great.  50% of the time it works every time.  Needs new batteries at this point.

Pictures:








More to come as I keep digging.

Is that the one Ron had floating around for all those years?